• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.570-577
• /
• 2001

Three-dimensional time-dependent flow past a circular cylinder is numerically investigated using direct numerical simulation for Reynolds number 280 and 300. The higher-order finite difference scheme is employed for the spatial distributions along with the second order Adams-Bashforth and the first order backward-Euler time integration. In x-y plane, the convection term is applied by the 5th order upwind scheme and the pressure and viscosity terms are applied by the 4th order central difference. And in spanwise, Navier-Stokes equation is distributed using of Spectral Method. At Reynolds number 259 the two-dimensional wake becomes linearly unstable to a second branch of modes with wavelength about 1.0 diameters at onset (B-mode). Present results of three-dimensional effects of in wake of a circular cylinder is represented with spanwise and streamwise vorticity contours as Reynolds numbers.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.405-412
• /
• 2017

In the present study, two phase flows around a projectile vertically launched from an underwater platform have been numerically investigated by using a three dimensional multi-phase RANS flow solver based on pseudo-compressibility and a homogeneous mixture model on unstructured meshes. The relative motion between the platform and projectile was described by six degrees of freedom(6DOF) equations of motion with Euler angles and a chimera technique. The propulsive power of the projectile was modeled as the fluid force acting on the lower surface of the body by the compressed air emitted from the platform. Qualitative analysis was conducted for the time history of vapor volume fraction distributions. Uncorking pressure around the projectile and platform was analyzed to predict impact force acting on the surfaces. The results of 6DOF analysis presented similar tendency with the surficial pressure distributions.

• 한국전산유체공학회지
• /
• 제14권1호
• /
• pp.24-34
• /
• 2009

The equilibrium molecular-dynamic simulations have been performed to estimate the properties of the three kinds of fluids confined between two plates that are separated by 1.086 nm; included in the statical properties are the density distribution and the static structure, and the autocorrelation velocity function in the dynamic property. Three kinds of fluids considered in this study are the Lennard-Jones fluid, water and aqueous sodium-chloride solution. The water molecules are modeled by using the SPC/E model and the ions by the charged Lennard-Jones particle model. To treat the water molecules, we combined the quaternion coordinates with Euler angles. We also proposed a plausible algorithm to assign the initial position and direction of molecules. The influence of polarization of water molecules as well as the presence of ions in the solution on the properties will be addressed in this study. In addition, we performed the non-equilibrium molecular-dynamic simulation to compute the flow velocity for the case with the gravitational force acting on molecules.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제6권3호
• /
• pp.125-134
• /
• 2017

SOA (Service Oriented Architecture)를 기반으로 하는 소프트웨어는 비즈니스 요구사항에 기민하게 대응할 수 있어 사용이 확대되고 있다. SOA는 느슨한 서비스 결합과 메시지 교환 중심 아키텍처라는 특징 때문에 기존의 테스팅 방법 적용이 제한된다. 본 논문에서는 BPMN (Business Process Model and Notation)을 이용해 테스트 케이스를 생성하는 기법을 제안한다. 먼저 프로세스를 모델링하고, 이를 통해 비즈니스 흐름 그래프(BFG)를 생성한다. BFG의 입출력 차수를 대칭하고, 오일러 경로를 탐색하여 테스트 케이스를 생성한다. BPMN을 이용한 테스트 케이스 생성 기법은 SOA 기반 시스템에 적용 가능하며, 테스트 케이스 수를 감소시킬 수 있다.

• 한국항공우주학회지
• /
• 제31권5호
• /
• pp.10-17
• /
• 2003

정적으로 불안정한 비행선의 안전성을 확보하기 위해서는 동적 안정성이 필수적으로 요구된다. 본 연구에서는 강제진동 풍동시험을 보완하고 검증하기 위한 수치해석이 수행되었다. 비행선의 저속 유동장 해석을 위해 저마하수 예조건화된 수치기법이 적용되었다. 동적 감쇠계수의 변화를 두 가지 계산방법을 적용해 살펴보았다. 계산결과, 비행선은 각 방향의 모멘트에 대해 동적으로 안정되고, 힘에 대해서는 불안정하게 나타났다. 또한, 감쇠계수는 받음각과 각속도의 크기에 대한 영향보다 회전방향에 대한 영향이 더 큼을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제17권9호
• /
• pp.777-784
• /
• 2007

With the development of micro electronic circuits and optical equipment, the demand for developing smart munitions with the ability to autonomously search for and attack targets has increased. Since the electronic components within smart munitions are affected by high temperatures, pressure, and impulsive forces upon the combustion of gunpowder, stability and reliability need to be secured for them. Securing those stability and reliability requires soft recovery system which can decelerate smart munitions. A theoretical analysis of flow is performed for the secure recovery of bullets on the basis of Euler equation for compressible fluids. The inner pressure on a pressure tube, the speeds of bullets, and the deceleration of munitions are calculated theoretically. Theoretical results are compared with the data from the experiment with soft recovery system set up at the laboratory.

• 한국소음진동공학회논문집
• /
• 제15권5호
• /
• pp.586-594
• /
• 2005

In this paper, we studied about the effects of the rotating cantilever pipe conveying fluid with a moving mass. The influences of a rotating angular velocity, the velocity of fluid flow and moving mass on the dynamic behavior of a cantilever pipe have been studied by the numerical method. The equation of motion is derived by using the Lagrange's equation. The cantilever pipe is modeled by the Euler-Bernoulli beam theory. When the velocity of a moving mass is constant, the lateral tip-displacement of a cantilever pipe is proportional to the moving mass and the angular velocity. In the steady state, the lateral tip-displacement of a cantilever pipe is more sensitive to the velocity of fluid than the angular velocity, and the axial deflection of a cantilever pipe is more sensitive to the effect of a angular velocity. Totally, as the moving mass is increased, the frequency of a cantilever pipe is decreased in steady state.

• 한국해양공학회지
• /
• 제20권2호
• /
• pp.66-71
• /
• 2006

To develope a hull form of catamaran type dredging vessel, resistance characteristics is investigated to find the interaction effect of waves between the two hulls. Re fore body shape is simplified as two dimensional wedge shape for the maintenance and disassembly/assembly. Based on MAC method, numerical simulation is performed in staggered variable mesh system. Re conservation form of Euler equations and continuity equation are applied as governing equations. To verify numerical methods, the wive patterns along the hull surface are compared with the results of model tests. This study is performed as varying wedge shape of the bow and the distance between the two hulls. The wave interaction between two hulls are observed to investigate the relation the resistance performance and the flow characteristics. Suitable hull form and distance between two hulls are discussed.

• Wind and Structures
• /
• 제24권3호
• /
• pp.287-306
• /
• 2017

In the present study, a new assessment simulation of ride safety based on a new wind-traffic-pavement-bridge coupled vibration system is developed considering stochastic characteristics of traffic flow and bridge surface. Compared to existing simulation models, the new assessment simulation focuses on introducing the more realistic three-dimensional vehicle model, stochastic characteristics of traffic, vehicle accident criteria, and bridge surface conditions. A three-dimensional vehicle model with 24 degrees-of-freedoms (DOFs) is presented. A cellular automaton (CA) model and the surface roughness are introduced. The bridge deck pavement is modeled as a boundless Euler-Bernoulli beam supported on the Kelvin model. The wind-traffic-pavement-bridge coupled equations are established by combining the equations of both the vehicles in traffic, pavement, and bridge using the displacement and interaction force relationship at the patch contact. The numerical simulation shows that the proposed method can simulate rationally useful assessment and prevention information for traffic, and define appropriate safe driving speed limits for vulnerable vehicles under normal traffic and bridge surface conditions.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.724-729
• /
• 2017

노즐을 빠져나가는 유동과 연소실 내 음향 섭동의 상호작용은 연소 불안정을 억제하는 핵심 요소로 작용하며 노즐감쇠는 노즐 어드미턴스를 이용하여 정량적으로 평가가 가능하다. 본 연구에서는 노즐의 음향 감쇠 성능을 측정할 수 있는 변형된 임피던스 튜브 실험을 수행하여 수치적 해석기법인 Crocco의 이론을 적용한 1차원 선형화 오일러 방정식으로 도출된 노즐 어드미턴스 값과 비교하였다. 그 결과, 노즐 어드미턴스의 증감하는 부분의 정성적인 경향이 유사함을 확인 가능하였고 그에 따른 노즐감쇠가 효율적인 주파수대를 예측할 수 있었다.