In this study, ethylene-propylene-diene monomer (EPDM) rubbers reinforced with various particle size of carbon black were prepared and tested. We followed recently published CSA/ANSI CHMC2 standard "the test methods for evaluating material compatibility in compressed hydrogen applications-polyemr". Measurement of change in hardness, tensile strength and volume were performed after exposure to maximum operating pressure, 87.5 MPa, for 168 hours (1 week). Once EPDM was exposed to high-pressure hydrogen, the samples experience volume increase and degradation of the physical properties. Also, after the dissolved hydrogen was fully eliminated from the specimens, the hardness and the tensile properties were not recovered. The rubber reinforced with smaller sizes of carbon black particles showed less volume expansion and decrease of physical properties. As a result, smaller particle size of carbon black filler led to more resistance to high-pressure hydrogen.
An experimental study was conducted using the tracking wheel test (IEC 62217) method for evaluating the performance of insulator materials, in particular ethylene propylene diene monomer (EPDM) and silicone rubber. In addition, we studied the tracking characteristics resulting from applying the same method for the shape of the insulator housing, that is, the performance of regular and alternating sheds. The evaluation parameters were leakage current, surface characteristics, SEM, EDX, hydrophobicity, and temperature distribution; likewise, we applied the commercial frequency dry (and wet) flashover voltage test. We found that the regular shed had a greater leakage current than the alternating shed and that the recovery of the hydrophobicity in terms of rest time was greater than that of the EPDM in terms of leakage current. All of the regular-shed insulators of silicone rubber had tracking traces and choking on the sheath parting line, while the alternating shed showed only choking at the interface but no tracking traces. Therefore, it can be concluded that the commercial frequency wet flashover voltage of the silicone rubber with regular shed before and after the tracking wheel test is higher than that of the alternating shed.
일반적인 고무가공 공정에 비해 열가소성 고무 (Thermoplastic Elastomer: TPE)의 가공은 재료가 공공정의 단축, 생산공정의 간소화, scrap의 재활용 둥의 장점과 이에 따른 불량률 저하에 의한 폐기물감소, 제조원가 감소 및 부가가치성을 높일 수 있어 국제 경쟁력 확보에 유리하다. 본 연구에서는 Ethylene propylene diene monomer (EPDM)고무와 polypropylene을 사용하여 동적가교 (dynamic vulcanization)에 의해 블렌드를 제조한 후, glass insert molding법을 이용하여 fixed glass weather-strip을 성형하였다. 성형품의 기계적인 특성을 조사하기 위하여 인장강도, 신장율. 경도, 비중을 측정하였으며, mixing 상태는 SEM 사진을 통하여 관찰하였다. TPE molding 부분과 glass를 일체 성형하므로써 공정의 효율성에 대한 기여 및 생산 자동화에 유리할 것으로 기대한다.
Yoon, Yoo Mi;Kim, Donghyun;Kim, Jeong Hoe;Kim, Minseub;Lee, Won Ki;Park, Chan Young
Elastomers and Composites
/
제52권3호
/
pp.194-200
/
2017
After the grafting of methacrylic acid (MA) to ethylene propylene diene monomer (EPDM), a new peak at $1704cm^{-1}$ corresponding to the carboxylic acid group was observed in the infrared (IR) spectrum. This characteristic MA molecule peak grew larger as the MA contents were increased. After casting films were prepared from pure EPDM and MA-grafted EPDM, differential scanning calorimeter (DSC) measurements were made the pure EPDM exhibited a melting point of approximately $45^{\circ}C$ while that of the MA-grafted EPDM was $135{\sim}140^{\circ}C$. As the graft ratio of MA increased, the absorbed heat capacity increased at temperatures near $135{\sim}140^{\circ}C$, indicating that an increased amount of MA reacted. Furthermore, owing to the addition of crystalline MA, it is expected that strength of the elastomer will improve as the graft ratio increases, as a result of the increased number of hard segments.
Choi, Sung-Seen;Kim, Yeowool;Chung, Yu Yeon;Bae, Jong Woo;Kim, Jung-Soo
Elastomers and Composites
/
제51권3호
/
pp.175-180
/
2016
Influence of amino acidic chemical on properties of maleic anhydride-grafted ethylene-propylene-diene terpolymer/zinc oxide (EPDM-g-MAH/ZnO) composites was investigated. 4-Aminosalicylic acid (ASA), 4-amino-2-methoxybenzoic acid (AMBA), 12-aminolauric acid (ALA), and glutamine (Gln) were employed as the amino acidic chemicals. Though small quantity (0.5 phr) of the amino acidic chemical was added to the EPDM-g-MAH/ZnO composite, the properties were notably changed. By adding the amino acidic chemical, the percent crystallinity and apparent crosslink density were reduced. Order of the percent crystallinity was related to that of the $pK_a$ values of amino acidic chemicals. By adding the amino acidic chemical, the basic tensile properties were on the whole improved. The experimental results were explained by the $pK_a$ values of amino acidic chemicals, change of zinc ionomer formation, and interactions between the additive and EPDM-g-MAH chain.
본 연구는 고체 추진기관에 적용되는 내열재를 기존의 autoclave 공법이 아닌 hot press molding을 포함한 B/D 성형공법으로 제작하는데 초점을 두고 있다. EPDM/kevlar를 기본 조성으로 내열재 원료가 구성된다. 우선 부츠 내열재는 금형을 사용하여 가황 상태로 제작한다. 연소관에 일체형 내열재로 성형하기 위하여 두 개의 내열재 사이에 테이프를 삽입하였고, bladder를 사용하여 압력과 온도를 상승시켜 제작하였다.
Polymers are the most commonly used di-electrics because of their reliability, availability, ease of fabrication and cost. The commercial and industrial demand for advanced polymeric materials which are capable of being used in harsh environment is need of the hour. The study of the effect of electron beam irradiation on polymeric materials is an area of rapidly increasing interest. This paper discusses the resultant beneficial effects of electron beam irradiation on the SiR-EPDM blend having 50:50 composition. The changes in mechanical and electrical properties of SiR-EPDM blend which are exposed to three different doses of electron beam radiation namely 5 Mrad, 15 Mrad and 25 Mrad are presented. The irradiated blends are analyzed for their electro-mechanical and physico chemical properties. The electrical changes induced by irradiation are investigated by arc resistance, surface resistivity and volume resistivity measurements as per ASTM standards. The mechanical changes are observed by the measurement of tensile strength and elongation at break. Physico chemical investigation has been done using the FTIR, in order to investigate the irradiation induced chemical changes.
격벽형 펄스분리장치를 갖는 이중펄스 로켓모타의 경우 2단 모타 추진제 연소시 1단 모타 연소실 내부에 높은 강도의 가스흐름이 발생하므로 1단 모타 연소관 내열재 설계가 중요한 변수들 중의 하나이다. 본 논문에서는 이러한 높은 강도의 가스흐름으로부터 연소실 내부를 보호하기 위하여 fabric을 삽입한 EPDM계 고무의 제작 공정을 확립하였으며 높은 강도의 가스흐름을 유발하도록 설계된 모사모타에 적용하여 삭마 특성을 분석하였다.
본 연구에서는 EPDM 고무를 기지재로 사용하여 유기 난연제에 따른 난연 특성을 살펴보았다. EPDM 원료 고무에 카아본블랙, 스테아르산, 산화아연 가교제 등을 배합하여, 난연제가 첨가되지 않은 EPDM 고무 혼합물인 E0를 제조하였다. E0에 인계 난연제인 Tricresyl phosphate(TCP)를 인 함량이 0.5, 1, 1.5, 2 phr로 변량 첨가하여 E1~E4를 제조하였고, 적인을 인 함량이 3, 6, 9, 15 phr로 변량 첨가하여 E5~E8를 제조하였다. 또한 브롬계 난연제인 데카브로모디페닐옥사이드(DBDPO)와 염소계 난연제인 염화파라핀은 각각 브롬과 염소 함량을 3, 6, 9, 15 phr로 변량 첨가하여 E9~E12와 E13~E16을 각각 제조하였다. 난연제의 종류에 따라 제조된 고무시료의 인장 및 인열, 경도 등의 기본 물성을 시험하였으나, 난연제 함량에 의한 이들 변화는 커다란 차이를 보이지 않았다. 또한 난연 특성을 알아보기 위한 산소지수 시험에서는 E0의 산소지수가 23.5%를 나타내었으며, 난연제를 첨가한 고무의 산소지수는 23.7~28.5%를 나타내어서 난연 특성이 향상됨을 알 수 있었다. 또한 UL94의 수평법에 의한 시험에서 난연제로 적인을 사용한 EPDM 고무 혼합물의 난연 효과가 가장 우수함을 확인 할 수 있었고 반면 TCP를 첨가한 고무 혼합물의 경우, 블리딩(Bleeding)현상이 심하여 시험 결과의 재현성을 얻지 못하였다. 전반적으로 난연제의 종류에 관계없이 함량 증가에 따라 연소율이 감소하였고 난연 효과가 향상됨을 확인하였다.
알루미늄 생산의 폐기물로 나오는 적니를 플라스틱의 Filler로서 재활용하기 위한 연구를 수행하였다. 여러가지 플라스틱에 적니를 첨가하여 본 결과 고밀도폴리에틸렌(HDPE), 저밀도 폴리에틸렌(LDPE) 및 폴리프로필렌(PP)에 적니가 Filler로서 사용 가능한 것으로 나타났다. 적니가 플라스틱에 첨가됨에 따라 플라스틱은 다른 안료의 첨가 없이도 붉은 고동색을 나타내었고 인장탄성율 등은 증가하였으나 내충격 강도가 저하되었다. 이를 방지하기 위한 첨가제가 연구되었는데 HDPE에는 에틸렌비닐알코올(EVA)을 첨가제로 5%정도 첨가하는 것이 효과적인 것으로 나타났다. PP의 경우에는 Maleic anhydride 변성 PP를 첨가하면 내충격강도의 저하가 축소되었다. LDPE, HDPE, PP, 폴리스티렌 및 ABS가 섞여있는 혼합 폐플라스틱에 대해서도 적니가 Filler로서 사용 가능한 것으로 나타났는데 이때는 성분간의 비상용성으로 인하여 기계적 물성이 매우 낮았다. 역시 첨가제로서 에틸렌프로필렌 고무(EPR) 및 스티렌부타디엔 블록공중합체(SBS)를 혼합할 경우 좋은 물성을 가지는 적니 혼합 플라스틱을 얻을 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.