지난 수십 년 동안, 외부 자극에 대한 응답성이 우수하면서도 인체에 적용할 수 있는 소프트 액추에이터 개발을 위한 많은 노력이 이어졌다. 본 연구에서는 동역학적 정밀 제어가 가능한 의료용 소프트 액추에이터를 개발하기 위해, 유해한 화학적 첨가제나 개시제 없이 방사선을 이용하여 전기 자극 반응성과 물리적 특성이 우수한 3차원 가교 구조의 poly(acrylic acid) (PAAc)/poly(vinyl alcohol) (PVA)/poly(ethylene glycol) (PEG) 하이드로겔을 합성하였다. 방사선 조사 후, 모든 하이드로겔은 75% 이상의 겔 분율을 나타내었고, 표면 반사 적외선 분광법을 통해 PAAc/PVA/PEG 하이드로겔이 성공적으로 합성되었음을 확인하였다. 또한 PAAc/PVA/PEG 하이드로겔의 겔 분율, 평형 수분 함량, 압축 강도를 측정하여 감마선의 총 조사 선량과 구성 성분의 함량비 조절에 따른 하이드로겔의 물리적 특성 변화를 확인하였다. 조사된 감마선의 선량이 증가하거나 poly(ethylene glycol) diacrylate (PEGDA)의 함량이 많을수록 PAAc/PVA/PEG 하이드로겔은 높은 가교 밀도와 우수한 기계적 강도를 나타내었다. 또한 PAAc/PVA/PEG 하이드로겔은 3 V의 저전압에서도 전기적인 자극에 반응하였고, 전기장 하에서 이동성 이온의 움직임에 따른 하이드로겔의 밴딩 거동은 하이드로겔의 가교 밀도, 이온기의 함량, 인가 전압 및 전해질 용액의 이온 농도 등을 조절함으로써 제어할 수 있음을 확인하였다.
본 연구에서는 기존의 이차전지의 분리막보다 좋은 성능으로 각광받고 있는 PVdF (poly(vinylidene fluoride))에 공극률을 높여 전지의 성능을 향상시켜주는 수용성 고분자인 PEG (Poly(ethylene glycol))를 첨가하여 충전용 리튬 이차전지의 분리막을 상전이 방법으로 제조하였다. 용매인 DMF (N,N-dimethylformamide)에 PVdF-PEG를 단일상으로 녹인 후 깨끗한 유리판에 캐스팅하여 막을 얻었다. 기공은 증류수로 채워진 응고조에서 용매-빈용매 교환으로 형성되어진다. 주사전자현미경(scanning electron microscopy, SEM)을 이용하여 분리막의 단면 관찰을 통해 다공성을 확인하였고 UTM (universal testing machine)을 이용하여 기계적 물성을 확인하였다. PEG-10의 정체시간 30 s에서 균일한 스폰지 구조를 확인할 수 있었으며, 이는 87%의 뛰어난 공극률을 가지며 인장강도의 경우 PEG-10에서 3.72 MPa로 가장 크게 나타났고, 신장률과 모듈러스 부분에서도 역시 75.45%와 275.27 MPa로 뛰어난 성능을 나타냈다.
The present study was carried out to investigate the effects of cryoprotectants, equilibration step, freezing rate, culture condition following in vitro fertilization, and age and development stage of embryo by freezing with conventional slow freezing and vitrification on survival of frozen-thawed Korean native cattle(KNC) blastocysts produced in vitro. The KNC blastocysts produced in vitro were equilibrated in 1.8M ethylene glycol or 1.4M glycerol and cooled from -6$^{\circ}C$ to -35$^{\circ}C$ at -0.3$^{\circ}C$ or -O.6$^{\circ}C$ /minute. When equilibrated in 1.8M ethylene glycol, survival rate of fiozen4hawed blastocysts was sarne in both -0. 3$^{\circ}C$ /min and -0.6$^{\circ}C$ /min cooling rate(71.4%). With the equilibration in 1.4M glycerol, survival rate was higher in -0.3$^{\circ}C$ /min(63.6%) than in -0.6$^{\circ}C$ /min cooling rate(53.8%). For vitrification of the KNC blastocysts produced in vitro, they were equilibrated in 2-step or 3-step exposure to vitrification solution(25% ethylene glycol + 25% glycerol). Survival rate was sirilar in both 2-step(45.0%) and 3-step exposure(47.4%). According to culture condition following in vitro fertilization, higher survival rate was obtained for blastocysts co-cultured with bovine oviductal epithelial cell(BOEC, 77.3%) than for those cultured with epidermal growth factor(EGF, 65.7%) or for those co-cultured with BOEG + EGF (54.8%). According to embryo age and development stage, higher survival rate was obtained for 7-day ernbryos(70.0%) than 8-day(56.8%) or 9-day(20.0%) for blastocyst stage and obtained for 8-day embryos(74.3%) than 7-day(62.5%) or 9-day(42.9%) for exponded blastocyst. In surnmary, higher survival rate of frozen4hawed KNC blastocysts produced in vitro were obtained by using ethylene glycol for cryoprotectant and -0.3$^{\circ}C$ /min for cooling rate. And higher survival rate were obtained with co-culture with BOEC for culture condition following in vitro fertilization and with 7-day blastocyst or 8-day expanded blasto cyst for embryo age and development stage.
다공성 Poly(propylene) 분리막의 지지 하에 전해질 용액 (EC/DEC 1 : 1 혼합물 내의 $LiPF_6$ 1 M 용액) 내에서 DEGDMA [Di(ethylene glycol) dimethacrylate]의 $70^{\circ}C$ 열중합을 통하여 겔 고분자 전해질(GPE)막이 합성 되었다. 합성된 겔 고분자 전해질막의 이온전도도 및 전기화학적 안정성은 AC 임피던스법 및 CV (cyclic voltametry)법에 의하여 측정 평가하였다. 겔 고분자를 전해질로, 그리고 양극 및 음극으로는 각각 $LiMi_{0.8}Co_{0.2}O_2$ 및 graphite로 이용하여 리튬이온전지(LIB)도 제작하였다. 열중합을 통하여 리튬 이온전지에 적합한 이온전도도($10^{-3}\;S/cm$ 이상) 및 전기화학적 안정성을 보이면서 자체적인 성상을 유지하는 겔 고분자 전해질막을 얻을 수 있었다. 단량체 함량 5%의 전구체로 제작한 겔 고분자 전지는 단량체 함량이 7.0% 및 10.0%인 경우에 비하여 우수한 고율 및 충-방전 효율을 보였다.
Journal of Advanced Marine Engineering and Technology
/
제23권3호
/
pp.338-345
/
1999
The objective of this study is to developed the refrigeration vehicle system installed eutectic olu-tion plates which consists of copper tubes carrying the refrigerant between two aluminum plates and the space between the plates filled with eutectic solution. The numerical analysis for the loca-tion of plates to get the uniform low temperature distribution in storage space was carried out and the result showed that the top left-side and right-side walls were the proper places to install plates. For three different concentrations of ethylene glycol solution the temperature distribution of inside space were measured during the day time of summer and the 21% solution was found to be properto sustain the temperature of $5-10^{\circ}C$ for milk transportation. The result showed that the refrigeration truck installed eutectic plates was very efficient to keep the milk fresh during vehicle transportation.
The first esterification reactor in the continuous polymerization of poly(ethylene terephthalate) has been analyzed by solving the material balances for the two-phase system with respect to the solubility of terephthalic acid. The Newton-Raphson method was used to solve the material balance equations instead of the Simplex method that is frequently used for finding a minimum point of a residual rather than a solution of an equation. A solution for the material balance equations, with the constraint of non-zero liquid phase fraction, could not be obtained with the solubility data of Yamada et al., but could be obtained with solubilities over a minimum value that is larger than their data. Thus, the solubility data of Yamada et al. are considered to be too small. On the other hand, the solubility data of Baranova and Kremer are so large that they gave a solution with the liquid phase only. Based on our results, several typical solubility curves satisfying the constraint of a non-zero liquid phase fraction are suggested in this study; we studied the reaction characteristics of the system using these curves. A higher temperature and a lower pressure are preferred for reducing the content of diethylene glycol.
Objective : This study was conducted to examine the effect of vitrification on the survival and in vitro development of mice 1-cell zygotes. Method: Effects of exposure to vitrification solution and vitrification, with different concentrations of the cryoprotectant solution, were examined. The 1-cell zygotes were also subjected to a slow freezing-thawing method to compare with vitrification method. Solution composed of ethylene glycol (6.0 M, 5.0 M, 4.0 M) and sucrose (1.0 M) were used as cryopropectant. The experiments employed the method loading the embryos on electron microscope grids. Results: I. The effects of exposure in vitrification solution. 1-cell zygotes were non-toxic at all concentrations of the vitrification solution showing the survival rate between 88.1% and 97.5%. Development into 2-cell was more successful in the higher concentrations of the vitrification solution. Therefore, higher concentrations of the vitirification solution do not seem to cause any problems in vitrification procedure. II. The effects of vitrification method. 1-cell zygotes showed the survival rate between 78.8% and 92.4%. The lowest and the highest survival rate was observed in the 6.0 M and 4.0 M vitrification solution, respectively. 2-cell development rates varied from 77.6% to 91.3%. Blastocyst development rate was shown highest in 5.0 M and the lowest in 4.0 M solution. Therefore, the highest 2-cell and blastocyst development rate was observed in 5.0 M solution. III. Comparison of vitrification and slow freezing-thawing method on 1-cell zygotes. This experiment showed that 1-cell zygotes had the highest survival and development rates in 5.0 M vitrification solution. Vitrified group of 1-cell zygotes, in the 5.0 M vitrification solution, were compared with the group processed in slow freezing-thawing method. The development rate into 2-cell and blastocyst as well as the survival rate were higher in the vitrified group than in the slowly freezed group. Conclusion: 1. The results demonstrate that the best cryoprotectant is a 5.0 M vitrification solution for 1-cell zygotes. 2. Vitrification method significantly increases the survival rate of the 1-cell zygote and its development into 2-cell and blastocyst. Equilibration and exposure time during the vitrification was remarkerbly short in this experiment. Total time, from the exposure to vitirification solution to storage in the liquid nitrogen, was taken only 90 seconds. In contrast, the slow freezing-thawing method have taken more than four hours. Taken together, we presume that the overall time used for the procedure contributes to the results as an important parameter. 3. The loading of 1-cell zygotes on the EM grid is technically more simple and takes less time than the straw or cryo vial method.
The preparation of Y-doped $SrZrO_3$powder by ultrasonic spray pyrolysis was investigated as a representative system, in order to produce fine, single phase multicomponent oxide powders. A precursor solution containing metal nitrates, citric acid and ethylene glycol was atomized glycol was atomized with an ultrasonic spray nozzle. Gel particles formed by organic functional groups were pyrolyzed and subsequently calcined at $800^{\circ}C$ to obtain well-crystallized, single perovskite phase. Most of large particles exhibited macroscopic pores and weak agglomeration between primary particles. However, strong agglomeration was observed in the surfaces of large particles. The effect of the microstructures of these particles on size reduction to submicron particles was described.
Trichloromethylphosphonyl dichloride was prepared by the aluminium chloride method. We synthesized several heterocyclic compounds containing phosphorus atom by the stepwise esterification of trichloromethylphosphonyl dichloride with ethylene glycol, 2-mercaptoethanol, ethylene diamine, and 2-aminoethanol and the resulting heterocyclic compounds are 2-trichloromethyl-1,3,2-dioxa-, 2-trichloromethyl-1,3,2-thioxa-, 2-trichloromethyl-1,3,2-diaza-, 2-trichloromethyl-1,3,2-diaza-, and 2-trichloromethyl-1,3,2-oxazaphospholane-2-oxide. The best results were obtained in the solution of triethylamine as hydrochloric acid trapping agent. The structure of five-membered heterocyclic phosphonates were characterized by their IR, NMR, and elementary analysis and the mass spectra of the compounds were analyzed.
Pretreatment process of silica-coated PET fabrics, a major low-grade PET waste, was developed using the reaction with NaOH solution. By destroying the structure of silica coating layer, impurities such as silica and pigment dyes could be removed. The removal of impurity was confirmed by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX). The pretreated PET fabric samples were used for depolymerization into its monomer, bis(2-hydroxylethyl) terephthalate (BHET), by glycolysis with ethylene glycol (EG), and zinc acetate (ZnAc) catalyst. The quality of BHET was confirmed by DSC, TGA, HPLC and NMR analyses. The highest BHET yield of 89.23% was obtained from pretreated PET fabrics, while glycolysis with raw PET fabric yielded 85.43%. The BHET yield from untreated silica-coated PET fabrics was 60.39%. The pretreatment process enhances the monomer yield by the removal of impurity and also improves the quality of the monomer.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.