• 동력기계공학회지
• /
• 제9권3호
• /
• pp.15-20
• /
• 2005

In this paper, the effect of oxygen component in fuel on the exhaust emissions has been investigated for an indirect injection diesel engine. It was tested to estimate change of engine performance and exhaust emission characteristics for the commercial diesel fuel and oxygenated blended fuel which has four kinds of mixed ratio. And, the effects of exhaust gas recirculation(EGR) on the characteristics of NOx emission have been investigated. Ethylene glycol mono-n-butyl ether(EGBE) contains oxygen component 27% in itself, and it is a kind of effective oxygenated fuel of mono-ether group that the smoke emission of EGBE is reduced remarkably compared with commercial diesel fuel, that is, it can supply oxygen component sufficiently at higher loads and speeds in diesel engine. It was found that simultaneous reduction of smoke and NOx was achieved with oxygenated fuel(10vol-%) and cooled EGR method(10%).

• 한국기후변화학회지
• /
• 제9권1호
• /
• pp.69-74
• /
• 2018

The purpose of this study is to suggest the methodology of $CO_2$ Emission Factor Verification and Quantitative Assessment in Ethylene Product Processes. At first, this study compare the IPCC (Intergovernmental Panel on Climate Change) 1996 Guideline and 2006 Guideline. And analyse methodology for estimating $CO_2$ emission and $CO_2$ emission factor in Ethylene product process. Also analyse cases of estimating $CO_2$ emission factor based on material balance. Methodology of $CO_2$ Emission Factor Verification and Quantitative Assessment are following the categories proposed by GIR (Greenhouse Gas Inventory and Research Center). There are total 12 factors in 8 categories and give 5 or 10 points according to their importance. Also this study suggests necessary data of document to meet the conditions. The result would help estimate accuracy Greenhouse Gas Inventory. Also contribute to establish policy on environmental assessment, air conservation, etc.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.37-40
• /
• 2007

Diesel autothermal reforming(ATR) is an effective method for hydrogen production. But, diesel ATR has several problems such as the sulfur poisoning of catalyst and carbon deposition during reforming reactor. Especially, carbon deposition is a severe problem, which causes rapid performance degradation, in the reforming reaction. Ethylene among the reformate gas is a carbon precursor. Effective decomposition of ethylene is an important issue. In this paper, we investigated the carbon deposition from ethylene in the reforming reaction for proper reaction condition of diesel ATR. We achieved relatively high performance of diesel ATR under $H_{2}O/C=0.8$, $O_{2}/C=3$ condition that was based on the experiment of ethylene reforming reaction.

• 한국식품위생안전성학회지
• /
• 제9권1호
• /
• pp.43-48
• /
• 1994

Instrumental determination was performed for the analysis of residues of ethylene oxide(EO), ethylene chlorohydrin(ECH) and ethylene glycol(EG) in white ginseng powders which were deaerated for 30 min after EO fumigation. Gas chromatographic data showed that EO residues were 570 ppm in the immediate samples after deaeration and 170 ppm in the stored ones for 8 days at 30$\pm$1$^{\circ}C$, respectively, showing a decreasing tendency with elapsed time. On the other hand, ECH and EG residues in samples as the secondary products of EO were 17, 650 ppm and 727 ppm stored for one month, and 9, 595 ppm and 221 ppm stored for 3 months, respectively.

• 한국식품과학회지
• /
• 제34권6호
• /
• pp.1036-1042
• /
• 2002

'남고' 품종의 국내산 청매실을 $30\;{\mu}m$ 두께의 LDPE 필름 봉투에 넣고 탄산가스 흡착제로서 $Ca(OH)_2$, 에틸렌 흡착제로서 $KMnO_4$와 이들의 혼합 가스흡착제를 첨가하여 밀봉한 후 $25^{\circ}C$에 저장하면서 일반성분 및 호흡특성 변화를 관찰하였다. 저장중 적정 산도와 가용성 고형분은 감소하고 pH는 증가하여 숙성중 변화와 반대되는 경향을 보였으며, 청매실의 황화와 과육 연화에 의한 품질저하는 에틸렌 흡착제를 사용함으로써 현저히 억제되어 상온에서도 10일간 선도유지 효과를 확인할 수 있었다. 또한 에틸렌 흡착제를 첨가한 경우는 상온저장 10일 후에도 생리장해가 거의 발생되지 않았으며 호흡률의 변화도 거의 관찰되지 않았다. 청매실을 상온 유동할 때 적정 투과성의 플라스틱 필름에 밀봉포장하고 일정량의 에틸렌 흡착제를 사용함으로써 포장내부의 기체조성을 $CO_2$ 농도 7-8%, $O_2$ 농도 2-3%로 유지할 경우 안정적인 호흡패턴으로 생리적 장해를 억제하여 청매실의 신선도를 유지하는데 뚜렷한 효과가 있음을 확인할 수 있었다.

• 한국식품과학회지
• /
• 제31권5호
• /
• pp.1295-1299
• /
• 1999

CA 저장 중 후지 사과의 내부 기체 농도에 의한 저장 조건의 적합성을 신속하게 판단하기 위한 지표를 얻기 위하여 과실 내부 에틸렌과 이산화탄소의 농도에 따른 과육경도, 적정산도 및 과피 녹색의 유지정도를 조사하였다. 저장 중 사과의 내부 에틸렌 농도가 10ppm 이하에서는 과육경도, 적정산도 및 과피의 녹색이 거의 손실되지 않았으나 약 10ppm 이상에서는 급격하게 손실되었다. 저장 중 사과의 내부 이산화탄소 농도는 낮을수록 높은 과육경도, 적정산도 및 과피의 녹색을 유지하였는데 특히 내부 이산화탄소 농도가 2% 이하인 사과에서 높은 품질특성을 유지하였다 따라서 후지 사과의 CA저장에 적합한 저장조건은 사과의 내부 에틸렌과 이산화탄소 농도를 각각 약 10 ppm과 약 2% 이하로 유지할 수 있는 조건으로 판단되고, 사과의 내부 에틸렌과 이산화탄소 농도는 저장조건의 적합성을 판단하는 지표로 사용 가능하였다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2008년도 특별논문집
• /
• pp.126-132
• /
• 2008

Cutting procedures whose qualifies are determined by various variables largely influences shipbuilding productivity. Particularly, defects in cutting shapes and cutting surface results in delay of the post shipbuilding stages such as welding and assemblage process. Because cutting procedures are influenced by various numbers of requirements according to the plate thickness, cutting precision can be maintained when the cutting conditions are appropriate. Existing cutting procedures utilize fossil fuels such as propane or ethylene as the main fuel component. Especially, when fossil fuel is applied to thick plate cutting, this process gives relatively slow cutting speed and generates large quantities of harmful polluting fumes. Recently, hydrogen-oxygen mixed gas generated by electrically dissociating water into Hydrogen and oxygen components is welcomed as an alternative fuel source. Also recent results report that alternative cutting fuel improves the cutting Dualities and speed. This paper presents that cutting characteristics and optimum cutting condition of hydrogen-oxygen mixed gas.

• 펄프종이기술
• /
• 제40권1호
• /
• pp.29-34
• /
• 2008

The charcoal has been used not only as fuel but also as human health care material since it was used. Charcoal's performances were generally investigated in aspects of energy efficiency and caloric values. This study was conducted in order to increase charcoal's application area and to develop functional paper. Five types of charcoal were used on a basis of gas absorption properties from previous study. Handsheets were made by two methods by internal loading and surface spray on interlayer. Strength properties of internal loading and interlayer spray handsheets were decreased as the charcoal loading increased. Ethylene gas absorption property was higher in both of oak's black charcoal and white charcoal than others. In terms of strength, 5-10% charcoal loading was efficient. Above 10% loading, a rate of strength decrease was higher than that of ethylene gas absorption rate. Formaldehyde absorption property was higher at both of oak's black charcoal and mixed charcoal than others. However, to guarantee enough charcoal loading should be higher than 95 $g/m^2$ for sufficient formaldehyde absorption.

• 한국산업보건학회지
• /
• 제5권1호
• /
• pp.68-86
• /
• 1995

This study was conducted at five Ethylene Oxide(EO) sterilizing processes in hospitals located in Seoul from August 8 to August 30, 1994. The main purposes of this study were to assess the TWA(Time Weighted Average) and short term exposures to EO and to evaluate factors affecting EO concentrations in sterilizing room. Results are summarized as follows. 1. The TWA concentrations of the sterilizing operators ranged from <0.005ppm to 3.04ppm and those of two sterilizing rooms out of five exceeded 1ppm, the Korean and ACGIH standards. 2. When the door of the sterilizer is opened at the end of the sterilization cycle, the short term concentrations of operators ranged from <0.005ppm to 11.4ppm, and those of three sterilizing room out of five exceeded 5ppm, the ACGIH short term exposure limit(STEL). The short term concentrations of area samples ranged from 0.24ppm to 49.2ppm and those of four sterilizing room out of five exceeded 5ppm. 3. Factors affecting EO exposure level were aeration type, the location of storage site for sterilized item, amount of gas, use period of sterilizer(p<0.005). 4. Following recommendations are suggested to minimize exposure to EO. The use of EO gas should be reduced by using another available sterilization methods, and the sterilizers and gas tank storage site should be isolated from, other work areas. Combination of local and general ventilation system should be installed. Metal carts or baskets for sterilization load should be used, and work environment and medical monitoring should be performed regularly.

• 대한화학회지
• /
• 제7권2호
• /
• pp.128-132
• /
• 1963

A study has been made on the applicability of gas-liquid partition chromatography to the qualitative and quantitative analysis of complex mixture of gaseous hydrocarbons. While phthalate columns are widely used for this $purpose^9$, they separates neither saturated hydrocarbons from the unsaturated nor n-butane from isobutene or butene-1, therefore combined columns such as phthalate and dimethylsulfolane have been used for the perfect separation of gaseous hydrocarbons. It is shown by this study, however, that hydrocarbons having $C_1$ through $C_4$ can be separated with a 2-meters tetraethyleneglycol dimethylether column except ethane from ethylene, and trans-from cis-2-butene especially operated at $15^{\circ}C$$ using helium as the carrier gas. The column effluents were in order of methane, (ethane, ethylene), propane, propylene, isobutane, n-butane, isobutylene, butene-1, (trans-& cis-2-butene, isopentane), (butadiene-1, 3, n-pentane). Two kinds of liquified petroleum gases in market are analysed qualitatively and quantitatively. The results indicate that use of this 2-meters TEGDE column permits the separation and identification of all the commonly encountered aliphatic gaseous hydrocarbons.