• Journal of Hydrogen and New Energy
• /
• v.24 no.5
• /
• pp.437-443
• /
• 2013

Clathrate samples, using hydroquinone as a host and ethylene or propylene as a possible guest, were prepared and analyzed by means of spectroscopic measurements. Obtained results showed that ethylene can form clathrate compounds with hydroquinone at 4.0MPa and room temperature, while propylene cannot form clathrate compounds. Different formation behaviors of these two olefin compounds can be applied to a clathrate-based storage/recovery of ethylene in a selective way, and can provide useful information on the cavity size of the formed clathrate compounds.

• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.328-332
• /
• 2006

Poly(ethylene terephthalate) (PET) and poly(ethylene glycol) (PEG) copolymers cross-linked with pentaerythritol, a four-way cross-linker, are prepared to compare their mechanical and shape memory properties with the one cross-linked by glycerol. Composition of PEG and pentaerythritol is varied to search for the one with the best mechanical and shape memory properties. The highest shape recovery rate is observed for the copolymer composed of 30 mol% PEG-200 and 2.5 mol% pentaerythritol. Four-way cross-linking by pentaerythritol significantly improves shape recovery rate and retention of high shape recovery rate after repeated use compared to the one cross-linked by glycerol, a three-way cross-linker, and difference and advantage of additional cross-linking point are discussed.

• Journal of Veterinary Clinics
• /
• v.15 no.2
• /
• pp.325-330
• /
• 1998

The purpose of this study is to investigate the effect of acupuncture after the induction of acute kidney disease in dogs by ethylene glycol. Twenty four mixed breed, adult cats were used in the experiment. Ethylene glycol was administered orally at 1 ml/kg in 24 cats, and then 6 cats were treated by acupunchuture 6 cats were treated by electroacupuncture, 6 cats were treated by acupuncture and 6 cats were not treated as a control group. Treatment was done once daily far 4 dsys. The acupoint used were Gan-shu and Tai-xi. The effect of acnpuncture was evaluated by clinical symptom, blood chemical values, electrocardiogram (ECG) and histopathologkal findings. After treatement, acupuncture group revealed relatively fast recovery compared with other groups, in clinical symptoms, blood chemical values, ECG waves and histopathological findings. Laserpuncture group revealed secondly fast recovery compared with control group.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.4
• /
• pp.301-305
• /
• 2007

The performance of polymer electrolyte membrane fuel cell could be decreased due to coolant leaked from connection part. Micro pump was used to put small amount of coolant and investigate the effect on fuel cell. The stoichiometric ratio of hydrogen/air was 1.5/2.0, both side of gas was fully humidified, and current density of $400mA/cm^2$ was used as standard condition in this experiment. Constant current method was used to check performance recovery from coolant effect in 3 cell stack. The performance was recovered when coolant was injected in cathode side. On the other hand, the performance was not recovered when coolant was injected in anode side. Ethylene glycol could be converted to CO in oxidation process and cause poisoning effect on platinum catalyst or be adhered on GDL and cause gas diffusion block effect resulting performance decrease. Water with nitrogen gas was supplied in anode side to check performance recovery. Polarization curve, cyclic voltammetry, electrochemical impedance spectroscopy was used to check performance, and gas chromatography was used to check coolant concentration. Constant current method was not enough in full recovery of performance. However, water injection method was proved good method in full recovery of performance.

• Analytical Science and Technology
• /
• v.17 no.6
• /
• pp.527-531
• /
• 2004

Treatment with aqueous sodium hydroxide solution plays an important role to impart certain desirable properties - feel and luster on the surface of polyester fiber. In this process alkali wastewater contains disodium terephthalate, ethylene glycol (EG) and residual sodium hydroxide. In this paper we report a new method containing the pretreatments of derivatization with benzoyl chloride and solvent extraction using pentane. The calibration curve of EG determined by GC/MS-SIM shows a good linearity in the range of 0.1 to $25{\mu}g/mL$ having the standard deviation of ${\leq}8.7%$. The recovery and the detection limit of this method are 91.9-93.7% and $0.05{\mu}g/mL$ respectively.

• Journal of Sensor Science and Technology
• /
• v.5 no.6
• /
• pp.7-14
• /
• 1996

In order to develop gas sensor operating at low temperature, thick film $Co_{3}O_{4}$ sensor was fabricated. $Co_{3}O_{4}$ powder was prepared by precipitation from cobalt nitrate solution and the powders containing ethylene glycol as a binder was screen-printed on alumina substrate. Characteristics of sensitivity, response time, and recovery were investigated in terms of binder content and heat treating conditions. The $Co_{3}O_{4}$ sensor contained 15% ethylene glycol and heat-treated at $300^{\circ}C$ for 24hr showed the highest sensitivity at the operating temperature of $250^{\circ}C$. Its sensitivity of 1.1 to 5000ppm butane gas was very high, as compared with $0.8{\sim}0.85$ at the operating temperature of $350{\sim}400^{\circ}C$ for a commercial $SnO_{2}$ gas sensor. It is found that response time was fast, but recovery was poor for the sensor.

• Tribology and Lubricants
• /
• v.28 no.6
• /
• pp.315-320
• /
• 2012

For proper functioning, general machines usually need lubricant oil as a cooling, cleaning, and sealing agent at points of mechanical contact. The quality of lubricant oil can deteriorate during operation owing to various causes such as high temperature, combustion products and extraneous impurities. In this study, a heavy load stopped during operation, and the oil was analyzed to check whether any impurities were added. Extraction using acetonitrile followed by reaction with BSTFA(bistrimethylsilyl trifluoroacetamide) showed that, trimethylsilylated ethylene glycol was present in the lubricant oil. To quantify the ethylene glycol in the oil, deuterium-substituted ethylene glycol, which acted as an internal standard, was added to the sample and then extracted with the solvent. Next, the extract was reacted with the derivatizing agent(BSTFA) and then analyzed with GC/MS. The detection limit of this method was found to be $0.5{\mu}g/g$ and the recovery of oil containing $20,000{\mu}g/g$ of ethylene glycol was measured to be 94.8%. A damaged O-ring and eroded cylinder liner were found during the overhaul, which implied the leakage of coolant containing ethylene glycol into the lubricating system. The erosion of the cylinder liner was assumed to be due to cavitation of the coolant in the cooling system.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.175-178
• /
• 2001

일반적으로 점탄성 거동을 나타내는 고분자 액체의 전단유동특성(shear flow properties)을 평가하기 위하여 정상전단(steady shear), 동적전단(dynamic shear), 응력완화(stress relaxation) 그리고 크리프(creep) 및 크리프 회복(creep recovery) 실험 등이 활용되고 있다[1], 이때 영전단점도(zero shear viscosity)와 정상상태 회복 컴플라이언스(steady-state recoverable compliance)는 정상상태(steady state)에서 얻어지는 물리량으로, 각 실험방법으로부터 직접적 또는 간접적으로 측정이 가능하다. (중략)

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.921-927
• /
• 1995

Peach pulp was separated into serum and insoluble pulp by centrifugation at 11,000 rpm for 10 min. The serum portion was concentrated at $50{\sim}55^{\circ}C$ and $30{\sim}50\;mmHg$ with aroma recovery. Vapor generated at the early stage of vacuum evaporation was condensed and taken as aroma fractions: AR-1($0{\sim}5%$), AR-2($5{\sim}10$), AR-3($10{\sim}15%$), AR-4($15{\sim}20%$). Dynamic headspace concentration method was used to trap volatile compounds in aroma fractions and identification of aroma compounds was made by GC/MS. The yield of serum separated from peach pulp was 70.5% and the serum fraction contained the most of aroma compounds. Thirty-one aroma compounds, including ethylene, benzaldehyde, l-limonene and ${\gamma}-dodecalactone$ were identified. The efficiency of aroma recovery was reduced, as the recovery time was extended, as indicated by less peak numbers and peach areas of aroma fractions.

• Journal of Microbiology and Biotechnology
• /
• v.2 no.2
• /
• pp.135-140
• /
• 1992

The partitioning of recombinant human interleukin-2(rhII-2) in PEG 8000-dextran 38800 aqueous two-phase system has been investigated using three different sources of rhIL-2. In the case of pure rhIL-2, the solubility in a PEG-dextran two-phase system was low and most of rhIL-2 was partitioned into the bottom phase. For the recovery of rhIL-2 from insoluble protein aggregates, the inclusion bodies of recombinant E. coli were solubilized by the treatment with sodium dodecyl sulfate (SDS). The addition of SDS significantly enhanced not only the solubility of rhIL-2 but also the partitioning of rhIL-2 to the top phase. When the ratio of SDS to rhIL-2 was 2.0, the partition coefficient(K) and the recovery yield(Y) at the top phase were 4.5 and 88%, respectively, at pH 6.8. In order to reduce the recovery steps further, SDS was directly added to the intact recombinant E. coli cells and then partitioned into the PEG/dextran aqueous two-phase system. The observed partition coefficient ($K{\cong{3.0$) and recovery yield ($Y{\geq}80%$ )of this method were comparable to the rhIL-2 recovery from insoluble protein aggregates. The results obtained in this work indicate that PEG-dextran two-phase partitioning might provide a simple way for the recovery and partial purification of recombinant proteins which are produced as inclusion bodies.