• Bulletin of the Korean Chemical Society
• /
• 제10권2호
• /
• pp.214-216
• /
• 1989

• Mycobiology
• /
• 제36권1호
• /
• pp.66-69
• /
• 2008

A simple, efficient and cost effective method is described for the synthesis of Biginelli type heterocyclic compounds of dihydropyrimidinones analogous. They were prepared from a reaction mixture consisting of substituted benzaldehydes, thiourea and ethylacetoacetate using ammonium dihydrogenphosphate as catalyst. The procedure for the preparation of the compounds is environmentally benign and safe which is advantageous in terms of experimentation, catalyst reusability, yields of the products, shorter reaction times and preclusion of toxic solvents. The four new synthesised compounds were tested for their antifungal activity. They have good antifungal activity comparing to the standard (Fluconazole).

• 대한화학회지
• /
• 제20권6호
• /
• pp.500-506
• /
• 1976

파라페닐렌디히드라진(PPDH)과 디카르보닐化合物을 반응시켜서 생기는 縮合生成物들의 構造를 밝혔다. 아세틸아세톤과의 반응에서는 고리화합물인 1,1'-p-페닐린-bis-3-메틸-5-피라졸론이 얻어졌으며, 디아세틸과의 반응에서는 역시 고리화합물인 1,1'-p-페닐렌-bis-메틸-5-피라졸론이 얻어졌으며, 디아세틸과의 반응에서는 디아세틸 p-페닐렌디히라존이 生成되었다. 그 밖의 디카르보닐화합물에서 얻은 축합생성물은 불안정하여 구조결정이 어려웠다.

• Bulletin of the Korean Chemical Society
• /
• 제20권12호
• /
• pp.1394-1398
• /
• 1999

The structures of modified Ti$(OPr^i)_4$ with chelating ligands (L) such as ethylacetoacetate (Etac), acetylacetone (Acac) and methylacetoacetate (Mtac) were identified by using IR, ¹H NMR and $^13C$ NMR spectroscopies, and the octahedral structure was confirmed after modification. The pre-edge peaks of XANES spectra of modified metal alkoxides also denoted the mixture of five-fold and six-fold structures. The EXAFS fitting results showed the local structure around Ti atom after alkoxide modification. The hydrolysis-condensation rates of modified Ti alkoxide with organic additives were investigated by ¹H NMR spectroscopy. The Ti$(OPr^i)_4$ modified by Acac was less reactive toward hydrolysis-condensation reaction than those modified by the other alkoxides, which can be attributed to the stable ligand structure between Ti$(OPr^i)_4$ and Acac. The small particle size of modified Ti$(OPr^i)_4$ sol was obtained when Acac was employed.

• Archives of Pharmacal Research
• /
• 제13권4호
• /
• pp.319-324
• /
• 1990

Synthesis of $\alpha$-piperidino and $\alpha$-morphelino styryl quinoxalinone 2f, 2g respectively by facile one step method is reported. The Michael adducts (3a-d) obtained by the interaction of 2-styryl-2 (1H) quinoxalinone (2) and ethylacetoacetate have been treated with resorcino and hydroxylamine separately. With resorcinol the chromones (4) are obtained whereas with ydroxylamine isoxazoles (6) are the products. Michael addition of acetylacetone to 2 leads to 3-[1'-aryl-2'-(2'-hydroxy-3'-quinoxalinyl)ethyl]-2, 4-pentanediones (5) which undergo cyclisation with hydroxylamine to give isoxazoles (7). Addition of thiopenol and thioglycolic acid to 2 gives 3-$\alpha$[$\beta$-(phenyl)-$\beta$-(plenylthio)]ethyl-2(1H)-quinoxalinone (8) and 3-$\alpha$-[$\beta$-phenyl)-$\beta$-(hydroxycarbonylmethylithio)]-ethyl-2(1H)-qui noxalinone (9) respectively. 2-Bromomethyl-2(1H)-quinoxalinone (1b) reacts with thioglycolic acid to gives S-[2 (1H)-oxoquionoxaline-3-yl-methyl] mercaptoacetic acid (10) which on cyclisation with acetic anhydride/pyridine affords 1, 2, 5, 6-tetrahydro [1, 4]thiazino[4, 3-a] quinoxaline-1, 6-dione (11).

• 한국세라믹학회지
• /
• 제31권7호
• /
• pp.804-812
• /
• 1994

Stable PZT coating sol was prepared using chelating agent, ethylacetoacetate(EAcAc) by sol-gel processing under ambient atmosphere. Through FT-IR spectrum analysis on solution of each reaction step, formation of metal complex was confirmed and prepared PZT sol was stable over several months. Through TG-DTA, XRD, FT-IR spetrum analysis of PZT gel powder, it was understood that the addition of EAcAc could reduce the transition temperature to ferroelectric phase, due to the increased homogeneity by matching the hydrolysis and condensation rates by chelation. Single perovskite phase was obtained by the heat-treatment at 54$0^{\circ}C$ for 30 min. The film was coated on ITO-coated glass substrate by dip coating method. After heat-treatment, PZT thin film had thickness in the range of 20~130 nm. The maximum dielectric constant of its thin film at room temperature and 1 kHz was 128.

• 한국세라믹학회지
• /
• 제31권9호
• /
• pp.1060-1068
• /
• 1994

Stable zirconia sol was prepared from zirconium butoxide Zr(OC4O9)4 as a precursor and ethylacetoacetate(EAcAc) or diethylene glycol(DEG) as a chelating agent under ambient agent under ambient atmosphere by Sol-Gel process. The sythesized sol was coated on 304 stainless steel substrate by dip coating, thereafter zirconia film could be obtained by heat-treatment at $600^{\circ}C$. The characteristics of coating film were determined by FT-IR, XRD, and ellipsometion peak represented Zr-O-Zr bonding of tetragonal phase was shown at 470cm-1. Crystallization of zirconia gel and film from amorphous state to tetragonal phase started at 40$0^{\circ}C$, and then transformed into monoclinic phase around $700^{\circ}C$. Zirconia film coated on 304 stainless steel substrate showed relatively low porosity of 16% when it was coated with 0.4M zirconia sol and thereafter heat-treated at 80$0^{\circ}C$ and the film was densified continuously up to 90$0^{\circ}C$. The zirconia film of 10 nm thick acted as a protective layer against oxidation up to $700^{\circ}C$.

• Archives of Pharmacal Research
• /
• 제20권6호
• /
• pp.620-628
• /
• 1997

6-Aryl-5-cyano-4-pyrimidinon-2-thione derivatives 1a-c reacted with ethyl iodide to give the corresponded 2-S-ethylpyrimidin-4-one-derivatives 2a-c. Compounds 2a-c was, in turn, reacted with hydrazine hydrate to give the sulfur free reaction products, 3a-c. These reaction products were taken as the starting materials for the synthesis of several newly synthesized heterocyclic derivatives. Reactions with several halogenated ketones, esters, chloroacetic acid and chloroacetamide give pyrimidotriazines 8,12 and 15 while their reactions with formic acid, acetic acid and carbon disulfide gave the corresponded triazolopyrimidines 17 and 21. The reaction with both acetyl acetone and ethylacetoacetate gave the corresponded 2-$(3^{I},5^{I}-dimethyl-1^{I}-pyrazoly$pyrimidine derivatives 20a-c and 24a-c respectively while the reaction with cinnamonitriles 25a-h afforded the corresponded aryl hydrazopyrimidines 27a-f. The structure of these reaction products were eatablished based on both elemental anlayses and spectral data studies.

• 한국세라믹학회지
• /
• 제32권1호
• /
• pp.95-105
• /
• 1995

Ceria(CeO2) stabilized zirconia(CeSZ) sol was synthesized with zirconium n-butoxide Zr(OC4H9)4 and cerium nitrate hexahydrate Ce(NO3)3.6H2O as precursors and ethylacetoacetate(EAcAc) as a chelating agent under atmosphere. CeSZ films were deposited on AISI 304 stainless steel using the prepared polymeric sol by dipcoating and the coating characteristics were investigated by XRD, ellipsometry, scratch test and SEM. The CeSZ film began to crystallize from amorphous to tetragonal phase at 40$0^{\circ}C$ and it was not converted into monoclinic phase up to 100$0^{\circ}C$ by the addition of 16mol% CeO2 as a stabilizer which could suppress phase transformation of zirconia. The CeSZ films were prepared by varying the EAcAc contents and the cncentration of CeSZ sol and measured the thickness and refractive index. From these results, it was found that the EAcAc contents and concentration of CeSZ coating sol evidently affect the densification of CeSZ film. The CeSZ film coated with 0.4M CeSZ sol and heat-treated at $600^{\circ}C$ for 10min had thickness of 50nm and 17% porosity. The CeSZ film on 304 stainless steel effectively acted as a protective layer against oxidation up to 80$0^{\circ}C$ and had superior corrosion resistance in 25% H2SO4 solution for 4.5 hrs.

• 한국세라믹학회지
• /
• 제32권5호
• /
• pp.617-625
• /
• 1995

In order to reduce reflectance of soda-lime glass having average reflectance of 7.35% and refractive index of 1.53, single (SiO2), double (SiO2/20SiO2-80ZrO2), and triple (SiO2/ZrO2/75SiO2-25ZrO2) layers were designed and fabricated on the glass substrate by Sol-Gel method. Stble sols of SiO2-ZrO2 binary system for antireflective (AR) coatings were synthesized with tetraethyl orthosilicate (TEOS) and zirconium n-butoxide as precursors and ethylacetoacetate (EAcAc) as a chelating agent in an atmosphere environment. Films were deposited on soda-lime glass at the withdrawal rates of 3~11 cm/min using the prepared polymeric sols by dip-coating and they were heat-treated at 45$0^{\circ}C$ for 10 min to obtain homogeneous, amorphous and crack-free films. In case of SiO2-ZrO2 binary system, refractive index of film increased with an increase of ZrO2 mol%. Designed optical constant of films could be obtained through varying the withdrawal rate. In the visible region (380~780nm), reflectance was measured with UV/VIS/NIR Spectrophotometer. Average reflectances of the prepared single-layer [SiO2 (n=1.46, t=103nm)], double-layer [SiO2 (n=1.46, t=1-4nm)/20SiO2-80ZrO2 (n=1.81, t=82nm)], and triple-layer [SiO2 (n=1.46, t=104nm)/ZrO2 (n=1.90, t=80nm)/75SiO2-25ZrO2 (n=1.61, t=94 nm)] were 4.74%, 0.75% and 0.38%, respectively.