• 한국결정성장학회지
• /
• 제6권4호
• /
• pp.521-531
• /
• 1996

분무건조법을 이용하여 무기질막 microcapsule과 무기질/유기질막 microcapsule을 제조하였다. 무기질막 microcapsule은 core 물질로 $K_{4}SO$와 clay shell 물질로 colloidal silica를 사용하였고, 무기질/유기질막 microcapsule은 core 물질로 상기 제조된 무기질막 microcapsule을 shell 물질로는 ethyl cellulose를 사용하여 각각의 microcapsule를 제조하였다. 제조된 microcapsule이 기능성을 갖기 위하여는 구형의 균일한 표면과 세공용적이 매우 중요하다. 무기질막 microcapsule인 경우 core/shell의 체적비가 0.3/0.7인 경우 구형의 균일한 표면의 microcapsule이 제조되었으며, 무기질/유기질막 microcapsule인 경우, 무게비가 0.76/0.24일 때 균일한 표면을 갖는 microcapsule이 제조되었다. 무기질/유기질막 microcapsule인 경우, 무기질막 microcapsule보다 세공용적이 감소하였고, shell물질(ethyl cellulose)의 양이 증가할수록 피복이 균일하게 되며, 세공용적도 감소하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.253-254
• /
• 2008

The $TiO_2$ Pastes was prepared with the starting materials of $TiO_2$ (P-25), ethyl cellulose, a-terpineol and bis(2-ethylhexyl) phthalate, and this $TiO_2$ paste application for dye-sensitized solar cells (DSSCs) were investigated. In order to improved transparency of $TiO_2$ photoanode films, $TiO_2$ paste was changed ethyl cellulose and a-terpineol contents. The morphology of prepared $TiO_2$ films were investigated by field emission scanning electron microscopy (FE-SEM). The electrochemical properties of the thin films and the performance of DSSCs were measured by photovoltaic-current density and AC impedance. Energy conversion efficiency was obtained about 5.7% at ethyl cellulose and a-terpineol on best mixed ratio under illumination with AM 1.5 ($100mWcm^{-2}$)simulated sunlight.

• 펄프종이기술
• /
• 제37권5호통권113호
• /
• pp.56-62
• /
• 2005

The catalytic effect of molybdovandophosphate heteropolyanion (HPAs) on the delignification of kraft bagasse pulp by hydrogen peroxide has been investigated. Very small amounts of the catalyst (0.05 0.3 mM/l) gave convenient results. Partial reduction of the catalyst was also studied. The effect of reaction medium (water, ethyl alcohol and acetone) on the bleaching was also studied. The results obtained show that the optimum condition for bleaching in presence of polyoxometalate were 0.05 mM/l catalyst concentration at $70^{\circ}C$ reaction temperature and $7\%$ consistency at pH 2 in aqueous medium. The ratio of water to solvent of 60:40 from acetone gives higher brightness than ethyl alcohol. The catalyst solution can be reused for 5 times without any reduction in brightness. ESR for the blank and exhausted solutions under different conditions was also carried out to find the relation between reduced metals and pulp brightness.

• Journal of Pharmaceutical Investigation
• /
• 제14권4호
• /
• pp.170-177
• /
• 1984

For the purpose of improving the fluidity of enteric-coated powders, various mineral silicates were added during spray drying process. Aqueous slurries of cimetidine, mineral silicates containing CMEC (carboxy methyl ethyl cellulose) were spray dried using a centrifugal wheel atomizer. The finely agglomerated powders obtained by this process were flowing as opposed to the original powders. The effect of four mineral silicates (colloidal silica, talc, bentonite, and kaolin) on the micromeritic properties and dissolution profiles of spray dried agglomerates were examined.

• Bulletin of the Korean Chemical Society
• /
• 제20권10호
• /
• pp.1153-1158
• /
• 1999

β-Cyclodextrin, amylose, and cellulose were partially methylated and acetylated in order to examine the relative reactivities of 2-, 3-, and 6-OH groups to alkylation and acylation. The partially methylated samples of the polysaccharides were treated with excess of ethyl iodide and sodium hydroxide in dimethyl sulfoxide to convert all of the free hydroxyl groups to ethyl ether groups. The partially O-ethylated and O-methylated polysaccharides were reductively cleaved with triethylsilane in the presence of trimethylsilyl methanesulfonate and borontrifluoride etherate (5 : 1 by mole) and the resulting 4-OH group was acetylated and benzoylated to form mixtures of eight 4-O-acyl-1,5-anhydroalditols. The relative ratio of the alditol esters were analyzed by gas chromatography to determine the degree of substitution at each position. A similar sequence of reactions was carried out with partially acetylated polysaccharides. The results indicated that the order of relative reactivities for methylation are 2-OH > 6-OH > 3-OH and for acylation are 6-OH > 2-OH > 3-OH regardless of the anomeric configuration.

• 폴리머
• /
• 제29권4호
• /
• pp.399-402
• /
• 2005

본 연구에서는 친환경 가소제(BET, EBN, ESO)를 첨가한 에틸 셀룰로오스 필름과 몬모릴로나이트(MMT) 나노입자를 이용한 생분해성 나노복합재료를 Hakke mixer를 이용하여 용융가공 공정으로 제조하였다. 제조한 에틸 셀룰로오스 필름의 유리전이온도는 BET의 함량을 30 $wt\%$까지 증가시켰을 때 $122^{circ}C$에서 $71^{circ}C$로 감소하는 결과를 보였다. 여기에 2차 가소제로 에폭시화된 콩기름을 10$wt\%$ 함량으로 첨가할 경우에 유리전이온도가 $81^{circ}C$에서 $61^{circ}C$로 감소하였다. 가소효과는 EBN보다 BET가 더 효과적이었다. 에틸 셀룰로오스 필름에 가소제를 첨가할수록 기계적인 물성은 감소하였으나, 몬모릴로나이트의 첨가와 ESO가소제의 에폭시 개환중합을 통하여 기계적 물성을 증가시킬 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제24권3호
• /
• pp.245-249
• /
• 2011

Carbon nanotubes (CNTs) have been significantly used for the field emitters for display applications. However, the lifetime of CNT emitters which are formed by screen printing technique is not guaranteed yet, because the constituents in CNT paste affect the lifetime of CNTs. The CNT pastes for screen printing are normally composed of organic vehicles (nitro cellulose, ethyl cellulose, etc) and additives (glass frits, indium tin oxide (ITO), etc) with CNTs. In this study, the effects of constituents in CNT pastes on the lifetime and emission characteristics of CNTs were investigated by thermal and electrical analysis. Use of glass frits worsened the lifetime and electron emission of CNTs. However, an addition of ITO to CNT paste rather improved the lifetime of CNTs. Degradation of CNTs was small when nitro cellulose was used in CNT paste as an organic vehicle.

• Korean Chemical Engineering Research
• /
• 제54권4호
• /
• pp.510-518
• /
• 2016

본 연구에서는 폴리에틸렌글리콜-카르복실산과 에틸셀룰로스 사이의 에스테르화 반응을 통해 에틸셀룰로스-폴리에틸렌글리콜 가지형 고분자를 합성하고 이를 정삼투 수처리 공정을 위한 복합막의 지지체 소재로 사용하고자 하였다. 합성한 에틸셀룰로스-폴리에틸렌글리콜은 핵자기공명 분광법 및 푸리에 변환 적외선 분광법을 통해 그 구조를 확인하였다. 비용매 유도 상분리법을 통해 에틸셀룰로스-폴리에틸렌글리콜 소재를 이용한 지지체를 형성하여 이를 에티셀룰로스 지지체와 비교해 보았을 때, 폴리에틸렌글리콜 작용기의 도입으로 인하여 친수성이 증가한 것을 확인하였다. 지지체 위에 계면중합을 통해 폴리아미드 활성층이 추가된 복합막을 형성하였고, 염화나트륨 용액을 유도 용액으로 사용하여 cross-flow 방식의 정삼투 수처리 장치에서의 성능을 비교하였다. 2M 농도의 염화나트륨 수용액을 유도 용액으로 사용하였을 때, 6.6 LMH의 수투과도를 보이는 에틸셀룰로스 지지체를 사용한 복합막에 비해, 에틸셀룰로스-폴리에틸렌글리콜 지지체를 사용한 복합막은 15.7 LMH의 증가된 수투과도를 보여주었으며, 이는 지지체의 증가된 친수성에서 기인한 것이다. 이러한 결과는 에틸셀룰로스-폴리에틸렌글리콜 지지체를 이용한 복합막의 막구조 파라미터가 감소한 것에서도 설명할 수 있으며, 지지체 소재의 친수성 증가가 정삼투 공정에 최적화된 복합막 지지체 구조를 형성할 수 있음을 시사한다.

• 조명전기설비학회논문지
• /
• 제14권1호
• /
• pp.1-6
• /
• 2000

Ethyl hydroxy ethyl cellulose의 고분자를 중심으로 하는 유기 결합제를 사용하고 형광체로서 ZnS:Cu와 유전체로$BaTiO_3$ 사용해 screen printing법에 의해 신광원으로서 많은 연구 개발이 집중되고 있는 유기분산형 백라이트 EL(Electroluminescent) 소자를 제조하였다. 제조된 백라이트용 유기 분산형 EL 소자의 특성은 $25[^{\circ}C]$, 100[V], 400[Hz]에서 $1.98[mA/\m^2]$의 전류밀도, O.075[W]의 power consumption, 정전용량 7.l[nF]를 나타내었다. 소자의 휘도는 50~150[V] 사이에서 $20~110[cd/\m^2]$의 밝기를 나타내였으며, 형광체의 색상변화는 ClE에 공인된 색 좌표에 의해 x=0.1711, y=0.3676의 bluish green의 색상을 나타내었다.

• 한국재료학회지
• /
• 제16권11호
• /
• pp.710-714
• /
• 2006

The purpose of this study is to identify the effect of additives and composition on copper surface morphology and mechanical characteristics by copper electrodeposition. Additives such as hydroxy ethyl cellulose(HEC), chloride ion were used in this study. Electrochemical experiments allied to SEM, XRD, AFM and four- point probe were performed to characterize the morphology and mechanical characters of copper in the presence of additives. Among various electrodeposition conditions, the minimum surface roughness of copper foil was obtained when electrodeposited at the current density of 200 mA/$cm^2$ for 68 seconds with 2 ppm of HEC. The minimum value of surface roughness(Rms) was 107.6 nm. It is copper foil is good for electromigration inhibition due to preferential crystal growth of Cu (111) deposited in the electrolyte containing chloride ions(10 ppm) and HEC(1 ppm).