• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.3
• /
• pp.270-276
• /
• 2005

This study was conducted to examine whether a specific synthetic metalworking fluid (MWF), "A", in use for 10 months without replacement, displayed microbial resistance and to identify the additives associated with the control of microbial growth. Three synthetic MWF products ("A", "B", and "C") were studied every week for two months. Microbial deterioration of the fluids was assessed through evaluation by endotoxin, bacteria and fungi levels in the MWFs. In addition, formaldehyde, boron, ethanolamine, and copper levels were also studied to determine whether they influence microbial growth in water-based MWFs. Throughout the entire study in the sump where MWF "A" was used, bacteria counts were lower than 103 CFU/mL, and endotoxins never exceeded 103 EU/mL. These levels were significantly lower than levels observed in sumps badly deteriorated with microbes. Boron levels in MWF "A" ranged from 91.7 to 129.6 ppm, which was significantly higher than boron levels found in other MWF products. The total level of ethanolamine (EA) in MWF "A" ranged from 35,595 to 57,857 ppm (average 40,903 ppm), which was over ten times higher than that found in other MWFs. Monoethanolamine (MEA), diethanolamine (DEA) and triethanolamine (TEA) concentrations in MWF "A" were also significantly higher than seen in other MWFs. However, although EA and boron might improve anti-microbial performance, their abuse can pose a serious risk to workers who handle MWFs. From an industrial hygiene perspective, our study results stress that the positive synergistic effect of boron and EA in reducing microbial activity in MWF must be balanced with the potentially negative health effects of such additives. Our study also addresses the disadvantage of failing to comprehensively report MWF additives on Material Safety Data Sheets (MSDS). Future research in MWF formulation is needed to find the best level of EA and boron for achieving optimal synergistic anti-microbial effects while minimizing employee health hazards.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.3
• /
• pp.173-177
• /
• 2007

The purpose of this study was to investigate the effect of salt formation on the percutaneous absorption of meloxicam through hairless mouse skin from a pressure sensitive adhesive (PSA) matrix. In addition, the influences of enhancers on the permeation of meloxicam or meloxicam-ethanolamine (MX-EA) salts across the hairless mouse skin were evaluated using a flow-through diffusion cell system. The salt formation of meloxicam resulted in lower permeation rate than the parent drug. $Span^{(R)}$ 80 provided the highest enhancing effect for meloxicam and meloxicam monoethanolamine salt. The maximum amount of the drug that can be loaded without retarding permeation rate was different depending on the compound. No relationship was found between the fluxes of meloxicam or MX-EA salts from saturated solutions and those from PSA matrices containing the same enhancer.

• Journal of the Korean Chemical Society
• /
• v.36 no.6
• /
• pp.947-954
• /
• 1992

Polyethylene glycol (PEG) grafted poly (γ-benzyl L-glutamate) (PBLG) was synthesized by the substitution reaction of PBLG and PEG having primary amino groups at both ends. PEG-g-PBLG films containing hydroxyl group were also prepared by the substitution reaction of PEG-g-PBLG film and ethanolamine (EA). Adhesion of platelets and activation of plasma proteins on the copolypeptide films were studied. The results showed that platelets are less adhered and activated on the PEG-g-PBLG than on other polypeptides and plasma recalcification time (PRT) on the PEG-g-PBLG was longer than that on other polypeptides. These results were consistent with those of blood clotting time and thrombus formation on the polypeptides. As a results, PEG-g-PBLG surfaces showed better blood compatibility than PBLG or PEG-g-PBLG-EA surfaces.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.1
• /
• pp.52-60
• /
• 2005

This study was carried to assess the accuracy of material safety data sheets (MSDS) for some water-soluble metalworking fluid (MWF) with respect to mono- ethanolamine(MEA), di-ethanolamine(DEA) and tri-ethanolamine (TEA). 39 fresh and 52 used MWFs for this study were taken from the workplace. The quantification and qualification of MEA, DEA and TEA were done using ion-chromatography. Three main findings of this study were 1) EA that was not addressed in material safety & data sheets (MSDS) was found to be enough higher than 1%, 2) 33.3% of 39 fresh MWF showed ingredient and concentration of MEA, DEA and TEA in MSDS and 3) the concentrations of MEA(20.5%), DEA(41.3%) and TEA(15.4%) were much higher than those indicated in MSDS. Consequently, we concluded that the accuracy on ingredients and concentrations of MEA, DEA and TEA provided in MWF was very low. Our study recommends that the limit concentration of chemical except for carcinogen that employer has to indicate in MSDS should be lowered from 1% to 0.1% .

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.407-416
• /
• 2018

This study presents a novel complete solution starting with a synthesis of silica modified with potassium-nickel hexacyanoferrate and ethanolamine (SiEA-KNiFe) sorbent through radiocesium sorption in different process configurations and moving on to the vitrification of the spent sorbent, using the sol-gel method. The experimental data for deionized water solution, as well as seawater solution, correlates strongly with the Langmuir isotherm model. Moreover, the study also presents a method for spent sorbent solidification in the glass matrix. The cesium leaching test confirmed that spent sorbent can be stably bound in the glass matrix after radionuclide removal.

• Safety and Health at Work
• /
• v.1 no.2
• /
• pp.175-182
• /
• 2010

Objectives: This study examined how ethanolamines (EAs) with the same functional alcohol group ($HOCH_2CH_2$), such as mono-EA (MEA), di-EA (DEA), and tri-EA (TEA), in water-based metalworking fluids (wbMWFs) are vaporized, condensed, and transformed by heat generated during metalworking. Methods: Two types of experimental apparatus were manufactured to achieve these objectives. Results: Vaporization tests using a water bath showed that the vaporization rate increased markedly from $0.19\;mg/m^2{\cdot}min$ at $23.5^{\circ}C$ to $8.04\;mg/m^2{\cdot}min$ at $60^{\circ}C$. Chamber tests with a heat bulb revealed that "spiked" MEA was fully recovered, while only 13.32% of DEA and no TEA were recovered. Interestingly, non-spiked types of EAs were detected, indicating that heat could convert EAs with more alcohol groups (TEA or DEA) into other EAs with fewer group(s) (DEA or MEA). The EA composition in fresh fluid was 4% DEA, 66% TEA, and 30% MEA, and in used fluids (n = 5) was 12.4% DEA, 68% TEA, and 23% MEA. Conversion from TEA into DEA may therefore contribute to the DEA increment. Airborne TEA was not detected in 13 samples taken from the central coolant system and near a conveyor belt where no machining work was performed. The DEA concentration was $0.45\;mg/m^3$ in the only two samples from those locations. In contrast, airborne MEA was found in all samples (n = 53) regardless of the operation type. Conclusion: MEAs easily evaporated even when MWFs were applied, cleaned, refilled, and when they were in fluid storage tanks without any metalworking being performed. The conversion of TEA to DEA and MEA was found in the machining operations.

• Membrane and Water Treatment
• /
• v.9 no.6
• /
• pp.385-392
• /
• 2018

Poly vinyl chloride (PVC) was chemically modified, and used for ultrafiltration to analyze the performance. Non-solvent induced phase separation (NIPS) method was used to prepare membranes. The neat PVC membrane was casted and used as a control membrane. Modified membrane was prepared by reacting PVC with ethanolamine (EA) in the casting solution (labeled as CM-PVC). Pure water permeability (PWP) was evaluated by measuring pure water flux. Humic acid was used as model foulant solute to analyze flux and rejection ability of membranes. Flux and rejection data of neat and modified membranes were compared to prove the improvement in the filtration performance. The experimental results showed that for PVC and CM-PVC, PWP was calculated to be ~64 and ${\sim}143L/m^2{\cdot}h$, respectively, and the rejection of humic acid was found to be 98% and 100%, respectively. TGA was carried out to analyze the effect of chemical modification on the thermal stability of polymer. FT-IR analysis was another characterization technique used for the comparative study.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.6
• /
• pp.867-873
• /
• 1995

This study was done ot investigate the effect of chronic alcohol feeding and acetylaminofluorene(2-AAF) treatment on hepatic mitochondrial ATPase activity andmembrane lipid composition. Male Sprague-Dawley rats, weighing 120~125g, were fed for 6 weeks on a liquid diet containing 35% of calories as ethanol. After 4 weeks of experiment diet feeding, 2-AAF(100mg/kg body weight) was injected twice a week intraperitoneally. Body weight and percent liver weight per body weight were significantly changed by ethanol feeding. Hepatic mitochondrial ATPase activity significantly decreased by ethanol feedings but not by 2-AAF treatment. In comparison to control, the ATPase activity of ethanol-AAF group decreased 29.3%. Since phospholipid(PL) content of mitochondria has an interaction effect between ethanol and 2-AAF treatment, 2-AAF treatment significantly increased phospholipid content in only ethanol fed group. Total cholesterol(C) level of mitochondria significantly increased by ethanol feeding. Consequently C/PL ratio of ethanol group was significantly higher than that of control group. The analysis of mitochondrial PL composition showed that cardiolipin(CL) significantly increased by 2-AFF treatment in control group. Phosphatidyl choline(PC) significantly increased by ethanol feeding, whereas PC significanlty decreased and phosphatidyl ethanolamine(PE) significantly increased by 2-AAF treatment. 2-AAF treatment also showed a significant increase in PE/PC ratio. Fatty acid patterns of mitochondria were also changed by either ethanol or 2-AAF although the severity of the changes was not great. These data suggest that the reduced mitochondrial ATPase activity in ethanol-AAF group may be a consequence of a changes in mitochondrial membrane lipid composition such as PE/PC ratio, C/PL ration and fatty acid patterns.