• Title/Summary/Keyword: Ethanol stability

Search Result 343, Processing Time 0.028 seconds

Effect of Temperature and pH on Trypsin Inhibitory Activity of Ethanol Extracts from Ecklonia cava (감태 에탄올 추출물의 Trypsin 저해활성에 대한 열 및 pH의 영향)

  • Jeong, Hee-Ye;Kim, Koth-Bong-Woo-Ri;Jung, Seul-A;Kim, Hyun-Jee;Jeong, Da-Hyun;Lee, Ga-Yeong;Kang, Bo-Kyeong;Bark, Si-Woo;Kim, Tae-Wan;Cho, Young-Je;Ahn, Dong-Hyun
    • KSBB Journal
    • /
    • v.27 no.6
    • /
    • pp.330-334
    • /
    • 2012
  • This study was performed to investigate the inhibitory activity of ethanol extract from Ecklonia cava (EE-EC) against trypsin and the stability of this activity under various heat and pH conditions. As a results, The EE-EC showed trypsin inhibitory activity of 77, 54, and 32% at concentrations of 5, 2.5, and 1 mg/mL and was not affected by the heat treatment conditions used in this study. Whereas trypsin inhibitory activity of EE-EC was stable in the pH range of 2-8, but decreased with pH treatment of pH 10 compared with the control. Therefore, the EE-EC could be useful as a natural and functional agent.

Functional Properties of Egg Shell Membrane Hydrolysate as a Food Material (난각막 분해물의 식품 소재로서 기능적 특성)

  • 전태욱;박기문
    • Food Science of Animal Resources
    • /
    • v.22 no.3
    • /
    • pp.267-273
    • /
    • 2002
  • The functional properties of egg shell membrane hydrolysate by Bacillus licheniformis(EESMH) and NaOH-ethanol(AESMH) as a food material were investigated.. The yield of egg shell membrane hydrolysate was about 15% by Bacillus licheniformis, whereas that was 70% by NaOH-ethanol. Histidine content was higher in EESMH (18.69%) than in AESMH (2.56%). Both EESMH and AESMH showed high protein solubility (>95%). Emulsi-fying activity and stability of EESMH were higher than those of AESMH. foaming capacity and stability of AESMH were 2 times higher than those of EESMH in the pH ranges from 2 to 12. The AESMH had antioxidative activity whereas EESMH had not. Therefore, both AESMH and EESMH can be used for industrial food materials from the results of functional properties.

Effect of Ethanol Fractionation of Lignin on the Physicochemical Properties of Lignin-Based Polyurethane Film

  • Sungwook WON;Junsik BANG;Sang-Woo PARK;Jungkyu KIM;Minjung JUNG;Seungoh JUNG;Heecheol YUN;Hwanmyeong YEO;In-Gyu CHOI;Hyo Won KWAK
    • Journal of the Korean Wood Science and Technology
    • /
    • v.52 no.3
    • /
    • pp.221-233
    • /
    • 2024
  • Lignin, a prominent constituent of woody biomass, is abundant in nature, cost-effective, and contains various functional groups, including hydroxyl groups. Owing to these characteristics, they have the potential to replace petroleum-based polyols in the polyurethane industry, offering a solution to environmental problems linked to resource depletion and CO2 emissions. However, the structural complexity and low reactivity of lignin present challenges for its direct application in polyurethane materials. In this study, Kraft lignin (KL), a representative technical lignin, was fractionated with ethanol, an eco-friendly solvent, and mixed with conventional polyols in varying proportions to produce polyurethane films. The results of ethanol fractionation showed that the polydispersity of ethanol-soluble lignin (ESL) decreased from 3.71 to 2.72 and the hydroxyl content of ESL increased from 4.20 mmol/g to 5.49 mmol/g. Consequently, the polyurethane prepared by adding ESL was superior to the KL-based film, exhibiting improved miscibility with petrochemical-based polyols and reactivity with isocyanate groups. Consequently, the films using ESL as the polyol exhibited reduced shrinkage and a more uniform structure. Optical microscope and scanning electron microscope observations confirmed that lignin aggregation was lower in polyurethane with ESL than in that with KL. When the hydrophobicity of the samples was measured using the water contact angle, the addition of ESL resulted in higher hydrophobicity. In addition, as the amount of ESL added increased, an increase of 7.4% in the residual char was observed, and a 4.04% increase in Tmax the thermal stability of the produced polyurethane was effectively improved.

Effects of adding ethanol extracts from Ulmus davidiana to Yackwa base as an antioxidant during storage

  • Sim, Ki Hyeon
    • Korean Journal of Food Science and Technology
    • /
    • v.49 no.1
    • /
    • pp.63-71
    • /
    • 2017
  • This study aimed to assess the antioxidative potential of adding ethanolic extracts from Ulmus davidiana to Yackwa (Korean fried cookie). The reducing power and antioxidant activity of U. davidiana-treated Yackwa were assessed against DPPH, nitric oxide, superoxide anions, superoxide dismutase, and ABTS radicals. Increasing the amount of U. davidiana extract in Yackwa dough resulted in improved antioxidant properties. U. davidiana extracts were effective antioxidants with a radical scavenging potency similar to the potency of butylated hydroxytoluene (BHT) and L-ascorbic acid. The DPPH and nitric oxide radical scavenging activity of Yackwa containing 0.2% U. davidiana resulted in increased oxidative stability relative to control dough. Although the antioxidant effects of Yackwa containing U. davidiana extract were lower than those of Yackwa containing BHT and L-ascorbic acid, these results suggest that U. davidiana extracts have potent antioxidant activity. Accordingly, U. davidiana extract is a potential additive for deep-fried foods, such as Yackwa, to improve their oxidative stability.

Characterization of Nickel-coated Silver Nanowire Flexible Transparent Electrodes with a Random-mesh Structure Formed by Bubble Control (거품 제어에 의해 형성된 무정형 그물망 구조의 니켈이 코팅된 은나노와이어 유연 투명전극의 특성 분석)

  • Park, Jong Seol;Park, Tae Gon;Park, Jin Seok
    • Journal of the Semiconductor & Display Technology
    • /
    • v.19 no.3
    • /
    • pp.36-42
    • /
    • 2020
  • Silver nanowire (AgNW) random-meshes with high transmittance, low sheet resistance, and high oxidation stability and flexibility were fabricated using solution-based processes. The random-mesh structure was obtained by forming bubbles whose sizes and densities were controlled using a corona treatment of polyethylene terephthalate (PET) substrates. To reduce the sheet resistance of the fabricated AgNW electrode, a washing process using ethanol solution was performed. In addition, nickel (Ni) was coated on AgNW to improve resistance to oxidation. The effects of corona treatment and Ni-coating on the transmittance, sheet resistance, oxidation stability, and flexibility of the AgNW electrodes were investigated.

Sensing and Degradation Properties in the QCM Gas Sensor Coated with the PVC and GC Blended Liquid (PVC 및 GC물질의 혼합액을 코팅한 QCM가스센서의 센싱 및 열화특성)

  • 장경욱;김명호;이준웅
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2000.07a
    • /
    • pp.483-486
    • /
    • 2000
  • In the recognition of the gases using the quartz crystal rnicrobalance (QCM) coated with the film materials, it is important to obtain the recognition ability of gases, and the stability of film coated above the QCM. Especially, the thickness of film coated above the QCM is decreased according with the using circumstance and time of QCM gas sensor. Therefore, the sensing chararcteristics of film is changed with these. In this paper, we coated the lipid GC materials varing with the blended amount of PVC(Po1y Vinyl Chloride) and solution (Tetra Hydrofan:THF) above QCM to obtain the stability of lipid PC film. QCM gas sensors coated with film materials were measured the frequency change in the chamber of stationary gas sensing system injected 1-hexane, ethyl acetate, ethanol and benzene of 20.4 respectively. Also, we measured the degradation characteristics of QCM gas sensor to show the properties of stability.

  • PDF

The influence of nanofillers on the properties of ethanol-solvated and non-solvated dental adhesives

  • da Cruz, Leonardo Bairrada Tavares;Oliveira, Marcelo Tavares;Saraceni, Cintia Helena Coury;Lima, Adriano Fonseca
    • Restorative Dentistry and Endodontics
    • /
    • v.44 no.3
    • /
    • pp.28.1-28.10
    • /
    • 2019
  • Objectives: The aim of this study was to evaluate the influence of different concentrations of nanofillers on the chemical and physical properties of ethanol-solvated and non-solvated dental adhesives. Materials and Methods: Eight experimental adhesives were prepared with different nanofiller concentrations (0, 1, 2, and 4 wt%) and 2 solvent concentrations (0% and 10% ethanol). Several properties of the experimental adhesives were evaluated, such as water sorption and solubility (n = 5, 20 seconds light activation), real-time degree of conversion (DC; n = 3, 20 and 40 seconds light activation), and stability of cohesive strength at 6 months (CS; n = 20, 20 seconds light activation) using the microtensile test. A light-emitting diode (Bluephase 20i, Ivoclar Vivadent) with an average light emittance of $1,200mW/cm^2$ was used. Results: The presence of solvent reduced the DC after 20 seconds of curing, but increased the final DC, water sorption, and solubility of the adhesives. Storage in water reduced the strength of the adhesives. The addition of 1 wt% and 2 wt% nanofillers increased the polymerization rate of the adhesives. Conclusions: The presence of nanofillers and ethanol improved the final DC, although the DC of the solvated adhesives at 20 seconds was lower than that of the non-solvated adhesives. The presence of ethanol reduced the strength of the adhesives and increased their water sorption and solubility. However, nanofillers did not affect the water sorption and strength of the tested adhesives.

Stability and Percutaneous Transport of Prostaglandin $E_1$ (프로스타글란딘 $E_1$의 안정성 및 경피흡수)

  • Shin, Dong-Suk;Oh, Seaung-Youl
    • Journal of Pharmaceutical Investigation
    • /
    • v.29 no.4
    • /
    • pp.337-341
    • /
    • 1999
  • We have studied the stability and transdennal flux of prostaglandin $E_1\;(PGE_1)$ from various donor solutions through hairless mouse skin. Stability in HEPES buffer or in propylene glycol (PG) solution where enhancer (oleic acid (OA), propylene glycol monolaurate (PGML), transcutol (TC), ethanol (EtOH))s dissolved was investigated. $$PGE_1 was not stable in HEPES buffer. The concentration of $$PGE_1 decreased continuously for 7 days, and the degradation rate constant was $0.0028\;h^{-1}$, assuming first order reaction. The effect of current or penetration enhancer on the degradation was minimal. Percutaneous transport from HEPES buffer by passive or iontophoretic delivery without enhancer was close to nil. When OA or PGML was used together with PG, both passive and iontophoretic flux increased. PGML showed better enhancing effect than OA. Flux by cathodal delivery was about 2 times larger than that by passive delivery. Flux by anodal delivery was lower than that by passive delivery. TC and EtOH also increased the transdermal flux, but the effect was not as good as that observed when OA or PGML was used. These stability and flux data provide important information on how to formulate the patch, which will be the next step of this work, and on the polarity of current to use during iontophoresis.

  • PDF

Stability of Soybean Isoflavone Isomers According to Extraction Conditions

  • Choi, Yeon-Bae;Kim, Kang-Sung
    • Journal of Environmental Health Sciences
    • /
    • v.31 no.6
    • /
    • pp.498-503
    • /
    • 2005
  • Stability of soybean isoflavone isomers according to extraction conditions such as temperature, pH, and extracting solvents was investigated. Heating induced three chemical reactions to occur for malony1 derivatives of isoflavones, namely decarboxylation of malony1 groups into acety1 derivatives, deesterification of malony1 residues, and hydrolysis of $\beta$-glycosidic bonds. Among the twelve isoflavone isomers, change in concentrations of acety1glycosides were most pronounced: Acety1 derivatives were present only in trace amounts in unheated hypocotyls, but the content increased dramatically during heating. As for the glycosides, concentrations of daidzin and glycitin increased due to heat treatment, though that of genistin remained almost unchanged. Heat decomposition rates and the patterns differed among the three malony1 derivatives. After 120 min at $80^{circ}C$, the relative concentrations of daidzin, glycitin and genistin were increased from $9.2\%$, $12.4\%$ and $3.3\%$ to $19.3\%$, $21.9\%$ and $6.2\%$, respectively. When crude isoflavones were solubilized in glycine buffer (pH 10.0) and incubated at $80^{circ}C$, deesterification occurred faster than at pH 7.0. When the pH of isoflavone solution was increased, the malony1glycosides were hydrolyzed to their respective glycosides at increased rate. Both acetyl and aglycone forms were unchanged and only de-esterification reactions occurred. At the acidic pH, malonylglycosides were much stable both at 60 and $80^{circ}C$. However at pH 10, $80^{circ}C$ and 1 hr, $75-80\%$ of malonylglycosides were transformed to their deesterified glycosides. When isoflavones were extracted with $60\%$ aqueous ethanol at $60^{circ}C$, isoflavone isomers were stable and the deesterification reactions did not occur in these conditions. However, at $80^{circ}C$ deesterification of malonyiglycosides occurred significantly with $15-20\%$ of malonylglycosides being hydrolyzed into their respective glycosides. This experiment showed that malonylglycosides undergo decomposition when heated or exposed to alkaline conditions. Also, aqueous ethanol was preferred to aqueous methanol as solubilizing media for obtaining extract with minimum degradation of malonylglycosides.

Antioxidative capacity of hydrolyzed rapeseed cake extract and oxidative stability of fish oil-in-water emulsion added with the extract

  • Lee, A-Young;Lee, Jeung-Hee
    • Food Science and Preservation
    • /
    • v.24 no.4
    • /
    • pp.529-535
    • /
    • 2017
  • Rapeseed cake was extracted with 80% ethanol and then fractionated with $H_2O$ (fraction I) as well as with 30% (II), 50% (III), 70% (IV), and 100% ethanol (V). Total phenolic content (TPC), 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, ferric-reducing antioxidant potential, and Trolox equivalent antioxidant capacity were in the order of fractions II > III > I > IV > V. The three fractions with high antioxidant activities and TPC (I, II, and III) were pooled and hydrolyzed by NaOH solution, resulting in 18.97 mg sinapic acid/g hydrolyzed extract and 21- and 2.2-fold increases in TPC and DPPH radical scavenging activity, respectively. Hydrolyzed rapeseed cake extracts (200, 500, and 1,000 ppm) and catechin (200 ppm) as a comparison were added to 10% fish oil-in-water emulsion, and their effects on oxidative stability were investigated by measuring hydroperoxide values (PV) during refrigerated storage. PVs were significantly lower in the emulsions with added hydrolyzed extract as compared to the control (p<0.05) and significantly decreased with increasing extract concentration (p<0.05) over a period of 29 days. The emulsion added with hydrolyzed extract showed higher PV than that added catechin at the same concentration (200 ppm) during 13-22 days (p<0.05), but after then, the PV was not significantly different (p>0.05). This study indicates that hydrolyzed rapeseed cake extract rich in sinapic acid may inhibit oxidation in a fish oil-in-water emulsion in a concentration-dependent manner.