• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.1083-1094
• /
• 2012

Commercialized location estimation System with high accuracy is widely used for various services. However, if the systems aren't completely installed in an indoor, location estimation accuracy tend to be very poor. In this paper, indoor location estimation algorithm to improve the accuracy of object location, by correcting the location information obtained from a system that does not fully install, is proposed. In this paper, UWB-based Ubisense system that provides high position accuracy in an indoor environment was utilized. In conclusion, this paper was able to improve the positioning accuracy, by correcting that information about the location of the measured object in position estimation system.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.1
• /
• pp.43-49
• /
• 2023

In modern wireless communication systems including beamformers or location-based services (LBS), which employ multiple antenna elements, estimating the number of signals is essential for accurately determining the quality of the communication service. Representative signal number estimation algorithms including the Akaike information criterion (AIC) and minimum description length (MDL) algorithms, which are information theoretical criterion models, determine the number of signals based on a reference value that minimizes each criterion. In general, increasing the number of elements mounted onto the array antenna enhances the performance of estimating the number of signals; however, it increases the computational complexity of the estimation algorithm. In addition, various configurations of array antennas for the increased number of antenna elements should be considered to efficiently utilize them in a limited location. In this paper, we introduce an efficient signal number estimation algorithm based on the beamspace based AIC and MDL techniques that reduce the computational complexity by reducing the dimension of a uniform circular array antenna. Since this algorithm is based on a uniform circular array antenna, it presents the advantages of a circular array antenna. The performance of the proposed signal number estimation algorithm is evaluated through computer simulation examples.

• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.983-990
• /
• 2004

Multiple-count problem is occurred when rectangle objects span across several buckets. The CD histogram is a technique which selves this problem by keeping four sub-histograms corresponding to the four points of rectangle. Although It provides exact results with constant response time, there is still a considerable issue. Since it is based on a query window which aligns with a given grid, a number of errors nay be occurred when it is applied to real applications. In this paper, we propose selectivity estimation techniques using the generalized cumulative density histogram based on two probabilistic models : \circled1 probabilistic model which considers the query window area ratio, \circled2 probabilistic model which considers intersection area between a given grid and objects. Our method has the capability of eliminating an impact of the restriction on query window which the existing cumulative density histogram has. We experimented with real datasets to evaluate the proposed methods. Experimental results show that the proposed technique is superior to the existing selectivity estimation techniques. Furthermore, selectivity estimation technique based on probabilistic model considering the intersection area is very accurate(less than 5% errors) at 20% query window. The proposed techniques can be used to accurately quantify the selectivity of the spatial range query on rectangle objects.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.4
• /
• pp.6-14
• /
• 2011

The fast growing of the number of users requires the development of reliable communication systems able to provide higher data rates. In order to meet those requirements, techniques such as Multiple Input Multiple Out (MIMO) and Orthogonal Frequency Division multiplexing (OFDM) have been developed in the recent years. In order to combine the benefits of both techniques, the research activity is currently focused on MIMO-OFDM systems. In addition, for a fast wireless channel environment, the data rate and reliability can be optimized by setting the modulation and coding adaptively according to the channel conditions; and using sub-carrier frequency, and power allocation techniques. Depending on how accurate the feedback-based system obtain the channel state information (CSI) and feed it back to the transmitter without delay, the overall system performance would be poor or optimal. In this paper, we propose a Signal to Noise Ratio (SNR) estimation algorithm where the preamble is known for both sides of the transciever. Through simulations made over several channel environments, we prove that our proposed SNR estimation algorithm is more accurate compared with the traditional SNR estimation. Also, We applied AMC on several channel environments using the parameters of IEEE 802.11n, and compared the Throughput performance when using each of the different SNR Estimation Algorithms. The results obtained in the simulation confirm that the proposed algorithm produces the highest Throughput performance.

• Geophysics and Geophysical Exploration
• /
• v.12 no.4
• /
• pp.347-354
• /
• 2009

Physical properties of rocks are strongly dependant on details of pore micro-structures, which can be used for quantifying relations between physical properties of rocks through pore-scale simulation techniques. Recently, high-resolution scan techniques, such as X-ray microtomography and high performance computers make it possible to calculate permeability from pore micro-structures of rocks. We try to extend this simulation methodology to velocity and electrical conductivity. However, the smoothing effect during tomographic inversion creates artifacts in pore micro-structures and causes inaccurate property estimation. To mitigate this artifact, we tried to use sharpening filter and neural network classification techniques. Both methods gave noticeable improvement in pore structure imaging and accurate estimation of permeability and electrical conductivity, which implies that our method effectively removes the smoothing effect in pore structures. However, the calculated velocities showed only incremental improvement. By comparison between thin section images and tomogram, we found that our resolution is not high enough, and it is mainly responsible for the inaccuracy in velocity despite the successful removal of the smoothing effect. In conclusion, our methods can be very useful for pore-scale modeling, since it can create accurate pore structure without the smoothing effect. For accurate velocity estimation, the resolution of pore structure should be at least three times higher than that for permeability simulation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.164-171
• /
• 2012

ESPRIT(Estimation of Signal Parameter via Rotational Invariance Techniques) estimates DOAs(directions of arrival) of the incident signals on a sensor array by exploiting the shift invariance between its two subarrays. This paper suggests an efficient DOA estimation method based on ESPRIT when coherent signals impinge on the sensor array. When applying ESPRIT, it is necessary to find a signal subspace. Though the widely known SS(spatial smoothing) method allows us to obtain a signal subspace in the presence of coherent signals, its computational complexity is very high. Recently a CV(correlation vector) based method has been presented which is computationally simple. However, the number of resolvable signals in the method is smaller than that in the SS based method when multiple coherent signal groups are present. The proposed method in this paper, which obtains a signal subspace by utilizing only part of the correlation matrix, significantly reduces the computational complexity as compared with the SS based one, while the former is resolving the same number of coherent signals as the latter,

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1257-1264
• /
• 2019

The traditional cuff-based method for BP(Blood Pressure) measurement is not suitable for continuous real-time BP measurement techniques. For this reason, the previous studies estimated various blood pressures by fusion with the electrocardiography (ECG) and photoplethysmogram (PPG) sensor signals. However, conventional techniques based on PPG bio-sensing measurement face many challenging issues such as noisy supply fluctuation, small pulsation, and drifting non-pulsatile. This paper proposed a novel BP estimation methods using PPG and ECG sensors, which can be derived from the relationship between PPG and ECG using PTT(Pulse Transit Time) and PWV(Pulse Wave Velocity). Unlike conventional height ratio features, which are extracted on the basis of the peaks in the PPG and ECG waveform. The proposed method can be reliably obtained even if there are missing peaks among the sensed PPG signal. The increased reliability comes from periodical estimation of the peak-to-peak interval time using ECG and PPG. After 250,000 times trials of the blood pressure measurement, the proposed estimation technique was verified with the accuracy of ±28.5% error, compared to a commercialized BP device.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.4
• /
• pp.275-285
• /
• 2003

The now video coding standard H.264 employs variable block size motion compensation, multiple references, and quarter-pel motion vector accuracy. These techniques are key features to accomplish higher coding gain, however, at the same time main factors that increase overall computational complexity. Therefore, in order to apply H.264 to many applications, key techniques are requested to improve their speed. For this reason, we propose a fast motion estimation which is suited for variable block size motion communication. In addition, we propose a fast mode decision method to choose the best mode at early stage. Experimental results show the reduction of the number of SAT SATD calculations by a factor of 4.5 and 2.6 times respectively, when we compare the proposed fast motion estimation and the conventional MVFAS $T^{［8-10］}$. Besides, the number of RDcost computations is reduced by about 45%. Therefore, the proposed methods reduces significantly its computational complexity without noticeable coding loss.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1758-1764
• /
• 2012

A large number of wire rope has been used in various inderstiries as Cranes and Elevators from expanding the scale of the industrial market. But now, the management of wire rope is used as manually operated by rope replacement from over time or after the accident.It is caused to major accidents as well as economic losses and personal injury. Therefore its time to need periodic fault diagnosis of wire rope or supply of real-time monitoring system. Currently, there are several methods has been reported for fault diagnosis method of the wire rope, to find out the feature point from extracting method is becoming more common compared to time wave and model-based system. This method has implemented a deterministic modeling like the observer and neural network through considering the state of the system as a deterministic signal. However, the out-put of real system has probability characteristics, and if it is used as a current method on this system, the performance will be decreased at the real time. And if the random noise is occurred from unstable measure/experiment environment in wire rope system, diagnostic criterion becomes unclear and accuracy of diagnosis becomes blurred. Thus, more sophisticated techniques are required rather than deterministic fault diagnosis algorithm. In this paper, we developed the fault diagnosis of the wire rope using probability density estimation techniques algorithm. At first, The steady-state wire rope fault signal detection is defined as the probability model through probability distribution estimate. Wire rope defects signal is detected by a hall sensor in real-time, it is estimated by proposed probability estimation algorithm. we judge whether wire rope has defection or not using the error value from comparing two probability distribution.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.382-385
• /
• 2007

Constantly enhancing positioning accuracy by the Global Positioning System (GPS) technique is of great importance, but challenging, especially after the GPS positioning technique has been improved considerably during the past two decades. The associated main error sources have been reduced substantially, if not eliminated. Troposhpeic influence with its highly temporal and spatial variability appears to be one of the major error sources. It is hence an increased interest among GPS researchers to reduce the tropospheric influence or delay. Two techniques have been commonly implemented to correct the tropospheric impact. The first technique, known as parameter estimation, characterizes the path delay with empirical models and the parameters of interest are determined from the GPS measurements. The second strategy, termed as external correction, involves independent path delay measurements. The present study is an integration of both techniques in which the parameter estimation as well as external correction are used to correct the path delay for $110{\sim}210$ km range baselines. Twenty-four parameters have been obtained in 24 hours solution by setting the cutoff angle at 3 and 15 degrees for parameter estimation strategy. Measurements from meteorological instruments and water vapor radiometer (WVR) are applied in the GPS data processing, separately, as an external strategy of present research work. Interesting results have been found, indicating more stable repeatability in baseline when the external correction strategy is applied especially with the inclusion of WVR observations. The offset of an order of 1 cm is found in the baselines determined by the two strategies. On the other hand, parameter estimation exhibits more stable in terms of GPS height repeatability. The offset in the GPS height determined by the two strategies is on the order of few centimeters.