• Journal of the Mineralogical Society of Korea
• /
• v.17 no.4
• /
• pp.327-338
• /
• 2004

XRD studies on annealed Na-feldspar (Amelia albite) at $1100^{\circ}C$ showed rapid structural changes due to Si-Al disordering, which resulted in phase transformations from low albite to high albite by 4-days annealing test. TEM SAED analyses on the annealed samples revealed a trend of structural changes, but estimation of the structural state was difficult due to a large deviation of the SAED data. Optimum conditions of CBED analyses on albite was established by employing a cooling specimen holder, 120 kV of acceleration voltage, 37 Jim of condenser aperture size and 25 nm of spot size. A proper orientation showing distinct changes of HOLZ lines corresponding to the structure changes of albite turned out to be close to the [418] direction with $-1.2^{\circ}$ tilting, where the width of two HOLZ lines in low albite was opposite to those in high albite.

• Korean Journal of Materials Research
• /
• v.11 no.6
• /
• pp.508-511
• /
• 2001

Experimental studies of the brittle-ductile transition (BDT) for pre-cracked sapphire single crystals were carried out. The BDT temperature in sapphire single crystals were $1000\pm$$25^{\circ}C$ and 1100$\pm$$25^{\circ}C$ at constant strain rate 3.3$\times$$10^{-5}$/sec and 3.3$\times$$10^{-6}$/sec, respectively. With aid of the BDT model, the activation energy for prism plane slip {1120} <1100> dislocation velocity was in the range of 4.6$\pm$2.3eV This activation energy for dislocation velocity with BDT model was compatible with the result of the dislocation velocity (3.8eV) using the etch-pit techniques.

• Journal of Internet of Things and Convergence
• /
• v.1 no.1
• /
• pp.1-4
• /
• 2015

This paper aims to present the mathematical model to find the mean web object transfer latency in the slow-start phase of TCP congestion control mechanism, which is one of the main control techniques of Internet. Mean latency is an important service quality measure of end-user in the network. The application area of the proposed latency model is the narrowband environment including multi-hop wireless network and Internet of Things(IoT), where packet loss occurs in the slow-start phase only due to small window. The model finds the latency considering initial window size and the packet loss rate. Our model shows that for a given packet loss rate, round trip time and initial window size mainly affect the mean web object transfer latency. The proposed model can be applied to estimate the mean response time that end user requires in the IoT service applications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7781-7787
• /
• 2015

The purpose of This paper is to address the development on supply-demand outlook model of aqua-cultured korean Flatfish and introduces a projection of supply-demand and market prices during 2015-2017 using developed model. The supply-demand outlook model is composed as a partial equilibrium model of Korean Flat fish. Each equation in the model is estimated by the econometric techniques. A reviews of the demand-outlook model stability is also carried out by the references based on RMSPE. MAPE, and Theil's inequality coefficients. According to the reference of RMSPE, the error rates of the forecasting values of the aqua culture area, culturing quantity, production quantity, market price show less than 4%, The production quantity and farm price are predicted respectively to be 42,561MT and 10,191KW per kg in 2017.

• The KIPS Transactions:PartB
• /
• v.11B no.2
• /
• pp.177-186
• /
• 2004

It is a weak point of the motion estimation technique for video compression that the predicted video encoding algorithm requires higher-order computational complexity. To reduce the computational complexity of encoding algorithms, researchers introduced techniques such as 3D-WT that don't require motion prediction. One of the weakest points of previous 3D-WT studies is that they require too much memory for encoding and too long delay for decoding. In this paper, we propose a technique called `FS (Fast playable and Scalable) 3D-WT' This technique uses a modified Haar wavelet transform algorithm and employs improved encoding algorithm for lower memory and shorter delay requirement. We have executed some tests to compare performance of FS 3D-WT and 3D-V. FS 3D-WT has exhibited the same high compression rate and the same short processing delay as 3D-V has.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.1
• /
• pp.226-234
• /
• 2011

The service life of concrete structures exposed to a marine environment can be extended by controlling the amount of chloride in cover concrete. Patching is one of the appropriate maintenance techniques for chloride contamination. Chloride-contaminated cover concrete is removed and replaced with sound one. It can provide less risk of corrosion of steel, so that the structure can be maintained for required service life. In this study, a quantitative assessment of the service life subjected to the chloride attack is proposed to determine the effective repair options such as repair depth, repair material and timing of repair. The Crank-Nicolson based finite difference formulation from Fick's second law is proposed to predict the profiles of chloride ion in a repaired concrete structure, considering ingress of chloride from outer and redistribution of residual chloride from the substrate concrete. Therefore, the repair application times and maintenance cost for the target service life can be estimated. Finally, the numerical examples are presented to ensure its applicability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12A
• /
• pp.1009-1018
• /
• 2003

A new fading channel estimation technique is proposed for an OFDM based modem In the ITS system. The algorithm is based on the transfer function extraction of the channel using the pilot signals and compensated the channel preceding the equalization. The newly derived algorithm is division-free arithmetic operations allows the faster circuit operation and the smaller circuit size. Proposed techniques compensate firstly the distortion which is generated at fading channels and secondly eliminate inter-symbol interference. All algorithms are suitability estimated and improved for a system implementation using digital circuits. As the results, the circuit size is reduced by 20% of the conventional design and achieved about 10% performance improvement at low SNR under 10dB in case of ITS system adapted 16-QAM mode.

• Journal of Sensor Science and Technology
• /
• v.6 no.4
• /
• pp.280-289
• /
• 1997

The measure of motor speed using encoder is difficult to detect accurate speed and direction in very low speed because the intervals between an encoder pulse and pulse are long. So various speed estimation techniques were proposed to have the good dynamic performance in low speed. And direction detection is so important as speed measurement in very low speed. But because the conventional direction detection circuit check the direction only 1 time in 1 period of each encoder pulses, so it has long delayed detection time in very low speed, thus accurate detection of direction is difficult. In this paper, we propose a 2 way edge detection method which can detect at the rising and filling edge of each encoder pulses. So it can check the direction 4 times in 1 period of each encoder pulses. Therefore if we use proposed method, we can reduce the detection time as 1/4 than that of conventional circuit and can detect more accurate speed and direction. And computer simulation and experiment is performed to verify the perfomance and effect of proposed circuit and we analyze it's results by comparing with that of conventional circuit.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.355-363
• /
• 2011

Recently, as one of several methods to improve the performance of DVC(Distributed Video Coding) system, many research works are focusing on the iterative refinement of side information. Most of the conventional techniques are mainly based on the relationship between the reconstruction level and side information, or the vector median filtering of motion vectors, but, their performance improvements are restricted. In order to overcome the performance limit of the conventional schemes, in this paper, a side information generation scheme is designed by measuring the block-cost estimation. Then, by adaptively selecting the compensation mode using the received bit-plane information, we propose a block-adaptive iterative refinement which is efficient for non-symmetric moving objects. Computer simulations show that, by using the proposed refinement method, the performance can be improved up to 0.2 dB in rate-distortion.

• Journal of KIISE:Software and Applications
• /
• v.31 no.2
• /
• pp.164-172
• /
• 2004

For a local search algorithm to find a bettor quality solution it is required to generate and evaluate a sufficiently large number of candidate solutions as neighbors at each iteration, demanding quite an amount of CPU time. This paper presents a method of selectively generating only good-looking candidate neighbors, so that the number of neighbors can be kept low to improve the efficiency of search. In our method, a newly generated candidate solution is probabilistically selected to become a neighbor based on the quality estimation determined heuristically by a very simple evaluation of the generated candidate. Experimental results on the problem of load balancing for production scheduling have shown that our candidate selection method outperforms other random or greedy selection methods in terms of solution quality given the same amount of CPU time.