• 대한원격탐사학회지
• /
• 제35권1호
• /
• pp.29-37
• /
• 2019

Synthetic Aperture Radar (SAR) observations are powerful tools to monitor surface's displacement very accurately, induced by earthquake, volcano, ground subsidence, glacier movement, etc. Especially, radar interferometry (InSAR) which utilizes phase information related to distance from sensor to target, can generate displacement map in line-of-sight direction with accuracy of a few cm or mm. Due to decorrelation effect, however, degradation of coherence in the InSAR application often prohibit from construction of differential interferogram. Offset tracking method is an alternative approach to make a two-dimensional displacement map using intensity information instead of the phase. However, there is limitation in that the offset tracking requires very intensive computation power and time. In this paper, efficiency of parallel computing has been investigated using high performance computer for estimation of glacier velocity. Two TanDEM-X SAR observations which were acquired on September 15, 2013 and September 26, 2013 over the Narsap Sermia in Southwestern Greenland were collected. Atotal of 56 of 2.4 GHz Intel Xeon processors(28 physical processors with hyperthreading) by operating with linux environment were utilized. The Gamma software was used for application of offset tracking by adjustment of the number of processors for the OpenMP parallel computing. The processing times of the offset tracking at the 256 by 256 pixels of window patch size at single and 56 cores are; 26,344 sec and 2,055 sec, respectively. It is impressive that the processing time could be reduced significantly about thirteen times (12.81) at the 56 cores usage. However, the parallel computing using all the processors prevent other background operations or functions. Except the offset tracking processing, optimum number of processors need to be evaluated for computing efficiency.

• 한국안전학회지
• /
• 제22권4호
• /
• pp.110-116
• /
• 2007

지구상에 역사가 시작된 이후로 에너지, 경제, 환경 등 3E 문제가 존재해 왔다. 특히, 산업사회의 발전과 더불어 인간의 삶에 대한 욕구도 날로 급속하게 변하고 있다. 주40 시간제가 시행되면서 야외활동을 즐기는 사람들이 많아지고 있다. 가스에 의한 사고도 토요일과 일요일에 가장 많이 발생하고 있다. 따라서 본 논문에서는 부탄 캔의 파열에 따른 화염의 영향으로 인간에게 미치는 영향을 알아보고자 한다. 이를 위하여 API에서 규정한 피해예측을 통하여 평가를 실시하였다. 폭발장소에서의 화염에 의해 미치는 영향 거리를 산출하여 거리별 복사열의 크기를 알게 되면 그 지점에서의 피해는 간단하게 예측할 수 있다. 또한 폭발장소 주변에 위치한 인간에게 미치는 영향을 PROBIT 모델에 적용하여 사고피해예측을 평가하였다. 프로빗 분석에 의하면 화염에서 50cm 이격된 곳은 1도 화상에 의한 손상확률이 97%, 2도 화상에 의한 손상확률은 8%, 화재로 인한 사망확률은 4%로 나타났다.

• Ocean and Polar Research
• /
• 제30권3호
• /
• pp.215-224
• /
• 2008

A piston core (MR06-04 PC23A) collected from the northern continental slope in the central Bering Sea has recorded the high-resolution millennial-scale variation of calcium carbonate ($CaCO3$) content during the last 65 kyr. An estimation of the age of the core sediments was carried out by using the lithologic correlation of the deglacial laminated layers with a neighboring core (HLY02023JPC), complementing the last appearance datum of both Lychnocanoma nipponica sakaii (54 kyr) and Amphimelissa setosa (85 kyr). The probable age of core MR06-04 PC23A was approximately younger than 65 kyr. Two distinct events of a significant increase of $CaCO3$ in the deglacial laminated sediments clearly correspond to MWP1A and MWP1B in the Bering Sea (Gorbarenko et al. 2005) and to T1ANP and T1BNP in the North Pacific (Gorbarenko 1996). These pronounced peaks of $CaCO3$ contents result from the elevated carbonate production in the surface water and the subsequent weakened dilution due to terrestrial input, along with an enhanced oxygen minimum zone. The $CaCO3$ contents are low (${\sim}2%$) during the last glacial period mainly because of a low carbonate production caused by an expanded sea-ice cover and an increased dilution by terrigenous particles due to their closer distance to the continent during the sea-level low stand. The occurrence of seven distinct $CaCO3$ peaks in core MR06-04 PC23A is remarkable during MIS 3 and MIS 4, and they most likely correlate to the short-term millennial Dansgaard-Oeschger events.

• 한국대기환경학회지
• /
• 제24권5호
• /
• pp.538-550
• /
• 2008

Radon is an invisible, odorless, and radioactive gas. It is formed by the disintegration of radium, which is a decay product of uranium. Some amounts of radon gas and its products are present ubiquitously in the soil, water, and air. Particularly high radon levels occur in regions of high uranium content. Although radon is permeable into indoor environment not only through geological features (bed rock and permeability) but also through the construction materials and underground water, the radiation from the geological features is generally main exposure factor. So there can be a problem in a certain space such as the underground and/or relatively poor ventilation condition. In this study, a GIS technique was used in order to investigate spatial distribution of radon measured from sub- way stations of 1 thru 8 in Seoul, Korea in 1991, 1998, 2001, and 2006. Spatial analysis was applied to reproduce the radon distribution. We utilized spatial analysis techniques such as inverse distance weighted averaging (IDW) and kriging techniques which are widely used to relate between different spatial points. To validate the results from the analyses, the jackknife technique for an uncertainty test was performed. When the number of measuring sites was less than 100 and also when the number of omitted sites increased, the kriging technique was better than IDW. On the other hand, when the number of sites was over 100, IDW technique was better than kriging technique. Thus the selection of analytical tool was affected sensitives by the analysis based on the number of measuring sites.

• 한국농공학회지
• /
• 제23권3호
• /
• pp.78-87
• /
• 1981

This study was attempted to get dimensionless unit hydrograph by linear model which can be used to the estimation of flood for the development of Agricultural water resources and laid emphasis on the application of dimensionless unit hydrographs for the ungaged watersheds by applying linear model. The results summarized through this study are as follows. 1.Peak discharge is found to be Qp= CAR (C =0. 895A-o.145) having high significance between peak discharge, Qp and effective rainfall, R within the range of small watershed area, 84 to 470km2. consequently, linearity was acknowledged between rainfall and runoff. Reasonability is confirmed for the derivation of dimensionless unit hydrograph by linear model. 2.Through mathematical analysis, formula for the derivation of dimensionless unit hydrograph was derived. qp--p=(tp--t)n-1[e-(n-1)](tp--t-1) 3.Moment method was used for the evaluation of storage constant, K and shape parameter, n for the derivation of dimensionless unit hydrograph. Storage constant, K is more closely related with the such watershed characteristics as length of main stream and slopes. On the other hand, the shape parameter, n was derived with such watershed characteristics as watershed area, river length, centroid distance of the basin and slopes. 4.Time to peak discharge, Tp could be expressed as Tp=1. 25 (√s/L)0.76 having a high significance. 5.Dimensionless unit hydrographs by linear model stood more closely to the observe dimensionless unit hydrographs On the contrary, dimensionless unit hydrographs by S.C. S. method has much difference in comparison with linear model at the falling limb of hydrographs. 6.Relative errors in the q/qp at the point of 0.8 and 1.2 for the dimensionles ratio by linear model and S. C. S. method showed to be 2.41, 1.57 and 4.0, 3.19 percent respectively to the q/qp of observed dimensionless unit hydrographs. 7.Derivation of dimensionless unit hydrograph by linear model can be accomplished by linking the two empirical formulars for storage constant, K, and shape parameter, n with derivation formular for dimensionless unit hydrograph for the ungaged small watersheds.

• 한국지반신소재학회논문집
• /
• 제21권3호
• /
• pp.1-10
• /
• 2022

본 논문에서는 지반 구조물의 재료 물성치에 대한 추계장 세트를 이용하여 재료 물성치의 공간적 임의성 및 확률 특성을 역추정한다. 이러한 추정된 재료 물성치의 확률분포 및 확률특성을 이용하여 구조 형상에 대한 위상 최적화를 수행하고, 기존의 결정론적 위상 최적화 결과와 비교한다. 재료 물성치에 대한 한 세트의 추계장들을 생성하고, 각 추계장에서 재료 물성치의 공간적 임의성을 모사한다. 각 추계장에서 재료 물성치의 부분값들을 이용하여 실제 재료 물성치의 확률분포와 확률 특성을 추정한다. 추정된 실제 재료 물성치의 확률특성을 추계장 세트의 확률 특성과 비교한다. 또한, 임의성을 가진 재료탄성계수를 가지는 지반구조물의 최적화 응답변화도와 임의성이 없는 재료탄성계수를 가지는 지반구조의 응답변화도를 비교한다. 따라서, 실제 재료 물성치의 공간적 임의성을 고려한 정량화된 확률론적 위상 최적화 결과를 얻을 수 있다.

• 생태와환경
• /
• 제45권4호
• /
• pp.347-355
• /
• 2012

In this study, non-point pollution sources in the Yeongsan river basin are analyzed; then, the priority regions (areas divided on a small scale) of management are selected for efficient water management of the Seungcheon and Jooksan reservoirs, which were constructed as one of the 4 major rivers restoration projects. The priority regions are decided by using the criteria of the excessive rate of target water quality, non-point pollution load per unit area, total TP load and down flow distance. The results of this study are as follows. The upper 10% of the priority regions for non-point pollution management includes YB15, YB05, YB10, YB24, YB14 and YB11 for the Seungcheon reservoir watershed, and YC24, YC25, YC30, YC34, YC22 and YC17 for the Jooksan reservoir watershed. However, a few regions in each of the Seungcheon and Jooksan reservoirs need to be selected in higher order, and the non-point pollution removal facilities in the regions need to be installed with respect to budget, urgent matter, and so on.

• 한국환경과학회지
• /
• 제25권8호
• /
• pp.1165-1176
• /
• 2016

The accuracy of digital elevation models (DEMs) is crucial for properly estimating flood inundation area. DEM pixel size is especially important when generating flood inundation maps of small streams with a channel width of less than 50 m. In Korea, DEMs with large spatial resolutions of 30 m have been widely applied to generate flood inundation maps, even for small streams. Additionally, when making river master plans, field observations of stream cross-sections, as well as reference points in the middle of the river, have not previously been used to enhance the DEM. In this study, it was graphically demonstrated that high-resolution DEMs can increase the accuracy of flood inundation mapping, especially for small streams. Also, a methodology was proposed to modify the existing low-resolution DEMs by adding additional survey reference points, including river cross-sections, and interpolating them into a high spatial resolution DEM using the inverse distance weighting method. For verification purposes, the modified DEM was applied to Han stream on Jeju Island. The modified DEM showed much better accuracy when describing morphological features near the stream. Moreover, the flood inundation maps were formulated with the original 30 m pixel DEM and the modified 0.1 m pixel DEM using HEC-RAS modeling of the actual flood event of Typhoon Nari, and then compared with the flood history map of Nari. The results clearly indicated that the modified DEM generated a similar inundation area, but a very poor estimate of inundation area was derived from the original low-resolution DEM.

• 대한가정학회지
• /
• 제39권10호
• /
• pp.97-109
• /
• 2001

It is thought that a composition of trousers is related to fabrics with single breadth. Therefore, trousers are designed with pattern using this fabrics with single breadth. However, in the old pattern of trousers, the breadth of 33cm-35cm was not considered in designing patterns. In this context, deciding which pattern design is better is not easy as there are a variety of estimation methods. So in this study, standardization of drafting is pursued by an objective pattern design. For this, a base angle of the trouser closely relating to a form and function was measured and using the height and the base angle, a trouser pattern design was tried. For a measurement of the base angle, 5 subject were selected. They are 25-29 year-old male graduates with fine physical standard. The base angle was measured with symphysis pubis point as a standard when subjects sat with their legs crossed, when they stood with their legs open (not forced artificially) and when they laid down with their legs open. The distance between a knee inside joint and knees was measured three times and the resultant value was used for the pattern design. For a design of trousers, the height was applied and the base angle was fixed. As a pattern drawing, using the height, a base angle and circumference of the hip, a trouser was designed. The production method for the pattern design is as follow: (1) The length formula, is height + $\frac{height}{2}$ (2) The hip girth formula is $\frac{hipgirth}{2}$ - $\frac{hipgirth}{20}$(3) A crotch angle is fixed at $72^{\circ}$. (4) The ratio of outer leg length to leg width is 5 : 8. (5) The component ratio of the upper outer leg length to the pant length is 5 : 8. (6) The ratio of the division point of front right inner leg length and left inner width to upper outer leg length is 5 : 8.

• 대한교통학회지
• /
• 제27권6호
• /
• pp.45-53
• /
• 2009

서울시의 버스체계개편 시행 후 약 4년이 지난 현재 대중교통 이용승객의 증가에도 불구하고 서울시의 재정부담은 크게 개선되지 못하였다. 이에 서울시는 버스의 경쟁력을 강화하고 효율성을 제고하기 위한 정책들을 수립할 계획이며, 이러한 정책의 효과를 객관적으로 평가하기 위해서는 버스수단 경쟁력의 기반이 되는 노선의 효율성 추정과 이에 영향을 미치는 요인들의 분석이 요구된다. 본 연구에서는 2008년 서울시 간선버스 노선의 자료와 DEA 모형의 하나인 BCC 모형을 이용하여 각 노선의 효율성을 추정하였다. 효율성 추정시 각 노선은 차량대수, 노선거리, 정류장개수, 배차간격, 운영비를 투입하여 승객수와 수익금을 산출하는 것으로 가정하였다. 투입지향 BCC 모형으로 분석한 결과, 평가노선 18개 중 규모수익불변(CRS)인 노선은 총 2개이며, 나머지 16개 노선은 규모수익체증(IRS)인 노선으로 분석되었다. 또한 분석에 사용된 요소들이 효율성 점수에 미치는 영향을 파악하기 위하여 토빗회귀분석을 수행한 결과, 현재 간선버스에 가장 큰 영향을 미치는 변수는 배차간격인 것으로 분석되었다.