• Animal Bioscience
• /
• v.34 no.4
• /
• pp.558-566
• /
• 2021

Objective: Objectives were to estimate energy and protein requirements of dairy crossbred steers, as well as to evaluate equations previously described in the literature (HH46 and CS16) to predict the carcass and empty body chemical composition of crossbred dairy cattle. Methods: Thirty-three Holstein×Zebu steers, aged 19±1 months old, with an initial shrunk body weight (BW) of 324±7.7 kg, were randomly divided into three groups: reference group (n = 5), maintenance level (1.17% BW; n = 4), and the remaining 24 steers were randomly allocated to 1 of 4 treatments. Treatments were: intake restricted to 85% of ad libitum feed intake for either 0, 28, 42, or 84 d of an 84-d finishing period. Results: The net energy and the metabolizable protein requirements for maintenance were 0.083 Mcal/EBW0.75/d and 4.40 g/EBW0.75, respectively. The net energy (NEG) and protein (NPG) requirements for growth can be estimated with the following equations: NEG (Mcal/kg EBG) = $0.2973_{({\pm}0.1212)}{\times}EBW^{0.4336_{({\pm}0.1002)}$ and NPG (g/d) = 183.6(±22.5333)×EBG-2.0693(±4.7254)×RE, where EBW, empty BW; EBG, empty body gain; and RE, retained energy. Crude protein (CP) and ether extract (EE) chemical contents in carcass, and all the chemical components in the empty body were precisely and accurately estimated by CS16 equations. However, water content in carcass was better predicted by HH46 equation. Conclusion: The equations proposed in this study can be used for estimating the energy and protein requirements of crossbred dairy steers. The CS16 equations were the best estimator for CP and EE chemical contents in carcass, and all chemical components in the empty body of crossbred dairy steers, whereas water in carcass was better estimated using the HH46 equations.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.28 no.3
• /
• pp.121-128
• /
• 2024

There are growing concerns that the recently implemented Earthquake Early Warning service is overestimating the rapidly provided earthquake magnitudes (M). As a result, the predicted damages unnecessarily activate earthquake protection systems for critical facilities and lifeline infrastructures that are far away. This study is conducted to improve the estimation accuracy of M by incorporating the observed S-wave seismograms in the near source region after removing the site effects of the seismograms in real time by filtering in the time domain. The ensemble of horizontal S-wave spectra from at least five seismograms without site effects is calculated and normalized to a hypocentric target distance (21.54 km) by using the distance attenuation model of Q(f)=348f^0.52 and a cross-over distance of 50 km. The natural logarithmic mean of the S-wave ensemble spectra is then fitted to Brune's source spectrum to obtain the best estimates for M and stress drop (SD) with the fitting weight of 1/standard deviation. The proposed methodology was tested on the 18 recent inland earthquakes in South Korea, and the condition of at least five records for the near-source region is sufficiently fulfilled at an epicentral distance of 30 km. The natural logarithmic standard deviation of the observed S-wave spectra of the ensemble was calculated to be 0.53 using records near the source for 1~10 Hz, compared to 0.42 using whole records. The result shows that the root-mean-square error of M and ln(SD) is approximately 0.17 and 0.6, respectively. This accuracy can provide a confidence interval of 0.4~2.3 of Peak Ground Acceleration values in the distant range.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.4
• /
• pp.327-335
• /
• 2002

Effects of available food on growth of commercially cultured Pacific oysters, Crassostrea gigas in Goseong Bay on the south coast were studied using a numerical model. levels of total protein, carbohydrate and lipid in particulate organic matter in the water column as well as chlorophyll a concentration were determined for estimating total available food for oyster growth. Environmental parameters including water temperature, salinity and total suspended solid were also monitored for the model. Oyster growth was also monitored by means of measuring shell length and tissue wet weight increase on a monthly basis. Simulation results from the numerical model indicated that chlorophyll a is not a good representative of available food for the oysters in Goseong Bay. In contrast, available food in the water column measured by filtration of the organic particles and analyzed in terms of total lipids, carbohydrates and protein was well matched with simulated oyster growth in the Bay which is similar to observed growth. The model also suggested that oysters have relatively low retention efficiency of $50\%$ or less. This result indicates that oysters in the bay utilize only a part of food particle available in the water column, as reported in other studies.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.1
• /
• pp.49-58
• /
• 2022

In September and October 2020, combined acoustic and trawl surveys were conducted in the northwestern sea of Jeju Island. In the survey area, a region, so called Jeju region, was designated to esimate the biomass of chub mackerel and jack mackerel using a trawl survey method and frequency difference method. In the September survey, the weight ratios of jack mackerel and chub mackerel to the total catch were 24.6% and 2.8%, respectively, and in the October survey, those ratios were 24.9% and 20.7%, which were used to calculate their biomass (trawl survey). Using the frequency difference range (-8 to -3dB) corresponding to two species in 120 and 200 kHz, their biomass was estimated (frequency difference method). As a result, the biomass of two species from the trawl method was 3252.3 tons in September and 5777.0 tons in October. The estimated biomass by the frequency difference method was 4926.6 tons in September and 7521.5 tons in October. It was the first trial to estimate the biomass of two species using the trawl and frequency differencing methods in South Korea although there were some differences between two methods. In addition, horizontal distributions of acoustic backscattering strength over the entire survey area were mapped.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.3
• /
• pp.239-247
• /
• 2008

Low back disorders (LBDs) have been the most common musculoskeletal problem in Korean workplaces. It affects many workers, and is associated with high costs to many companies as well as the individual, which can negatively influence even the quality of life of workers. The _evaluation of low back disorder risk associated with manual materials handling tasks can be performed using variety of ergonomic assessment tools such as National Institute for Occupational Safety and Health (NIOSH) Revised Lifting Equation (NLE), the Washington Administrative Code 296-62-0517 (WAC), the Snook Tables etc. But most of these tools provide limited information for choosing the most appropriate assessment method for a particular job and in finding out advantage and disadvantage of the methods, and few have been assessed for their predictive ability. The focus of this study was to _evaluate spinal loads in real time with lifting and pulling heavy cow leathers in variety of postures. Data for estimating mean trunk motions were collected as employees did their work at the job site, using the Lumbar Motion Monitor. Eight employees (2 males, 6 females) were selected in this study, in which the load weight and the vertical start and destination heights of the activity remained constant throughout the task. Variance components (three dimensional spaces) of mean trunk kinematic measures were estimated in a hierarchical design. They were used to compute velocity and acceleration of multiple employees performing the same task and to repetitive movements within a task. Therefore, a results of this study could be used as a quantitative, objective measure to design the workplace so that the risk of occupationally related low back disorder should be minimized.

• Structural Engineering and Mechanics
• /
• v.60 no.4
• /
• pp.567-594
• /
• 2016

The main objective of the current research is estimating the flexural behavior of ferrocement Ribbed Plates reinforced with composite material. Experimental investigation was carried out on fifteen plates; their dimensions were kept constant at 1200 mm in length, 600 mm width and 100 mm thick but with different volume fraction of steel reinforcement and number of ribs. Test specimens were tested until failure under three line loadings with simply supported conditions over a span of 1100 mm. Cracking patterns, tensile and compressive strains, deformation characteristics, ductility ratio, and energy absorption properties were observed and measured at all stages of loadings. Experimental results were compared to analytical models using ANSYS 10 program. Parametric study is presented to look at the variables that can mainly affect the mechanical behaviors of the model such as the change of plate length. The results showed that the ultimate strength, ductility ratio and energy absorption properties of the proposed ribbed plates are affected by the volume fraction and the type of reinforcement, and also proved the effectiveness of expanded metal mesh and woven steel mesh in reinforcing the ribbed ferrocement plates. In addition, the developed ribbed ferrocement plates have high strength, ductility ratio and energy absorption properties and are lighter in weight compared to the conventional RC ribbed plates, which could be useful for developed and developing countries alike. The Finite Element (FE) simulations gave good results comparing with the experimental results.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.177-186
• /
• 2013

PURPOSES: The purpose of this study theoretically reviews vertical grade deriving process in super high speed environment and compares overseas design criteria with Domestic Standardization also draws suitable vertical grade design criteria of high standard for Domestic Circumstances in Korea. METHODS : By researching domestic vehicle registration status, calculating typical vehicle, using Vissim which is traffic simulation program, Speed-distance curve of the vehicle is derived under each design speed condition. Through Speed-distance curve, estimating critical length of grade and considering critical length of grade, maximum longitudinal incline is proposed. RESULTS : The result of domestic vehicle registration status, the typical vehicle for deriving vertical grade is calculated based on gravity horsepower ratio 200 lb/hp. For calculating critical length of grade, according to change speed of uphill entry, speed-distance curve is derived by using Vissim. Critical length of grade is calculated based on design speed 20 km/h criteria which is point of retardation. Estimated critical length of grade is 808 m and based on this result, maximum longitudinal incline was confirmed in the design speed between 130km/h to 140km/h. CONCLUSIONS: The case of the typical vehicle(truck) which is gravity horsepower ratio 200 lb/hp, maximum longitudinal incline 2% is desirable at the super high speed environment in the design speed between 130km/h to 140km/h.

• The Korean Journal of Mycology
• /
• v.37 no.1
• /
• pp.55-59
• /
• 2009

The mushroom takes in charge of decomposer in ecosystem and its production is important indicator for sounded ecosystem function. To determine standing crop of basidiocarps(fruit body of mushroom), a weight must be measured by harvesting mushroom individual in the field. But this method has profound affection on the basidiocarps population or its surrounding condition due to habitat destruction. Thus, in this study, without harvesting any mushroom in the field, we developed allometric equation using some morphological parameters to estimate standing crop biomass of basidiocarps. Lentinula edodes, Pleurotus ostreatus, Flammulina velutipes and Conocybe tenera were used for allometry. Morphological variables of the mushroom were pileus diameter, pileus area, stipe length and stipe thickness. Consequently, all the experimental mushrooms species showed significantly correlation in biomass estimation of basidiocarps from allometric equation (p<0.05). As a result of this research, the standing biomass of the basidiocarps could be indirectly estimated with proportional expression, allometric equation drived from morphological characters.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.1
• /
• pp.50-58
• /
• 2018

Intermittent demand is a demand with a pattern in which zero demands occur frequently and non-zero demands occur sporadically. This type of demand mainly appears in spare parts with very low demand. Croston's method, which is an initiative intermittent demand forecasting method, estimates the average demand by separately estimating the size of non-zero demands and the interval between non-zero demands. Such smoothing type of forecasting methods can be suitable for mid-term or long-term demand forecasting because those provides the same demand forecasts during the forecasting horizon. However, the smoothing type of forecasting methods aims at short-term forecasting, so the estimated average forecast is a factor to decrease accuracy. In this paper, we propose a forecasting method to improve short-term accuracy by improving Croston's method for intermittent demand forecasting. The proposed forecasting method estimates both the non-zero demand size and the zero demands' interval separately, as in Croston's method, but the forecast at a future period adjusted by binomial weight according to occurrence probability. This serves to improve the accuracy of short-term forecasts. In this paper, we first prove the unbiasedness of the proposed method as an important attribute in forecasting. The performance of the proposed method is compared with those of five existing forecasting methods via eight evaluation criteria. The simulation results show that the proposed forecasting method is superior to other methods in terms of all evaluation criteria in short-term forecasting regardless of average size and dispersion parameter of demands. However, the larger the average demand size and dispersion are, that is, the closer to continuous demand, the less the performance gap with other forecasting methods.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.1
• /
• pp.75-84
• /
• 2022

Since South Korea did not adopt the recreation fishing using right (coupon) system, there were no recreation fishing statistics. This study selected 480 fishing vessels (10.4%) of a total of 4,611 fishing vessels (as of December 2019) as a survey sample using stratified sampling. Unlike other research institutes that conducted surveys related to the amount of tide on a one-time, this survey was conducted for five months (from May to October 2020, except the month of August). The captain investigated about types of fish, size, weight, etc. to anglers. A difference from previous studies was that about 7.0 million angler population (fishing more than three times a week) had 19.4 kg of catch per person for a year while other studies showed about 25.5-52.0 kg, respectively. The total fisheries resource catch amount was analyzed to be about 95,000 tons in this study and 116,000-166,000 tons in other studies. So there was a difference of about 1.2 to 1.8 times. This study aims to lay the foundation for the development of the fishing industry by preparing accurate statistical data and securing reliable basic statistics related to the fishing industry. Also, it could be usefully used as basic policy data such as introduction of a fishing using right (coupon) system.