• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.185-192
• /
• 2000

Recently, the hydraulic fill method is commonly used in many reclamation projects due to lack of fill materials. The method of hydraulic fill in reclamation is executed by transporting the mixture of water-soil particles into a reclaimed land through dredging pipes, then the dredged soil particles settle down in the water or flow over an out flow weir with the water. In the present study, practice each three method in order to suggest method of determining the loss rate of the dredged fills. The first sieve and hydrometer analysis were performed with the soil samples obtained before and after dredging and then apply theory of particle breakage, the second compare with the volume of dredged soil between at the dredging area and the target pond and the last compare with weight of dredged soil between before and after dredging at the dredging area and in the target pond for estimating the amount of soil particles residual at the reclaimed area and the loss of soil particles passed through the weir. In addition to compare with the loss ratio between as using Marsal's modified theory of particle breakage and measured weight and volume in the field.

• Steel and Composite Structures
• /
• 제2권1호
• /
• pp.1-20
• /
• 2002

Fiber-Reinforced Plastics (FRP) have received significant attention for use in civil infrastructure due to their unique properties, such as the high strength-to-weight ratio and stiffness-to-weight ratio, corrosion and fatigue resistance, and tailorability. It is well known that FRP wraps increase the load-carrying capacity and the ductility of reinforced concrete columns. A number of researchers have explored their use for seismic components. The application of concern in the present research is on the use of FRP for corrosion protection of reinforced concrete columns, which is very important in cold-weather and coastal regions. More specifically, this work is intended to give practicing engineers with a more practical procedure for estimating the strength of a deficient column rehabilitated using FRP wrapped columns than those currently available. To achieve this goal, a stress-strain model for FRP wrapped concrete is proposed, which is subsequently used in the development of the moment-curvature relations for FRP wrapped reinforced concrete column sections. A comparison of the proposed stress-strain model to the test results shows good agreement. It has also been found that based on the moment-curvature relations, the balanced moment is no longer a critical moment in the interaction diagram. Besides, the enhancement in the loading capacity in terms of the interaction diagram due to the confinement provided by FRP wraps is also confirmed in this work.

• Journal of Acupuncture & Meridian Studies
• /
• 제11권6호
• /
• pp.355-360
• /
• 2018

Introductions: Pneumothorax is the most frequent severe acupuncture-related adverse event occurring at the GB 21 acupoint. This study used ultrasonography (US) to measure the depth of the GB 21 acupoint in adults and assessed its applicability for ensuring safe acupuncture practices. Materials and methods: A US probe was used to measure the vertical depth from the skin to the pleural line of the apex of the lungs at the right and left GB 21 acupoints. The sex, age, body weight, height, and body mass index of each person were recorded. Student t test and generalized estimating equations were used for statistical analysis. Results: Sixty women and 41 men with a median age of 29 years were included in this study. The depth of GB 21 increased with body weight, height, and body mass index (p < 0.001). The mean depth of GB 21 in men (17.4 mm) was greater than that in women (14.6 mm; p < 0.001). The depth difference between the right and left shoulders was significant in men (p < 0.001) but not in women. Conclusions: US can be used to measure GB 21 acupoint depth. Further control studies on its use to ensure safe clinical practices, including preventing acupuncture-related pneumothorax, are warranted.

• International Journal of Ocean System Engineering
• /
• 제2권4호
• /
• pp.233-238
• /
• 2012

In this study, we carried out a precedent investigation for an ultra-large container ship, which is expected to be a higher value-added vessel. We studied a preliminary optimized design technique for estimating the principal dimensions of an ultra-large container ship. Above all, we have developed optimized dimension estimation models to reduce the building costs and weight, using previous container ships in shipbuilding yards. We also applied a generalized estimation model to estimate the shipping service costs. A Genetic Algorithm, which utilized the RFR (required freight rate) of a container ship as a fitness value, was used in the optimization technique. We could handle uncertainties in the shipping service environment using a Monte-Carlo simulation. We used several processes to verify the estimated dimensions of an ultra-large container ship. We roughly determined the general arrangement of an ultra-large container ship up to 1500 TEU, the capacity check of loading containers, the weight estimation, and so on. Through these processes, we evaluated the possibility for the practical application of the preliminary design model.

• 디지털융복합연구
• /
• 제16권7호
• /
• pp.89-96
• /
• 2018

본 연구에서는 모수추정법을 활용하여 국내 전문서비스 로봇 개발 데이터를 기초로 H/W비용추정을 위한 방안제시와 더불어 로봇의 적용 환경여건에 따라 달라지는 비용을 추정할 수 있도록 그 항목과 가중치를 도출하고자 한다. 이를 위하여 모수추정법을 활용하여 전문서비스 로봇 비용추정 방정식을 개발하였으며, 환경여건 고려를 위하여 FGI, 델파이를 통해 조정계수 항목과 이에 따른 가중치를 도출하였다. 분석결과 무게, 부피, 제작난이도가 반영된 비용 추정 방정식을 개발하며, 추정된 비용을 환경적 요소에 따라 조정하기 위한 방진/방수, 내열/내한, 안전, 시험, 기술혁신의 내용을 반영한 관계식을 도출할 수 있었다. 이를 통해 전문서비스 로봇의 비용을 추정할 수 있는 객관적인 근거를 마련할 수 있었으며, 이를 기반으로 전문서비스 로봇 H/W개발비용 추정을 위한 지속적인 연구로 이어질 것이다. 향후에는 다양한 전문서비스 로봇을 통해 풍부한 데이터를 수집하여 신뢰성을 높이고, 기능항목 발굴을 통해 모형 강화를 유도할 것이다.

• 한국공간구조학회논문집
• /
• 제9권4호
• /
• pp.61-72
• /
• 2009

건축물이 고층화 및 대형화 되어감에 따라 구조물 및 빌딩의 자중을 줄이는 것은 반드시 필요하게 되는데, 이러한 구조물 의 자중을 줄이기 위한 가장 효과적인 방법 중 하나는 경량콘크리트를 사용하는 것이다. 본 연구에서는 경량콘크리트의 단점인 강도를 보완하기 위하여 폴리머를 첨가하였으며, 폴리머 개질 경량콘크리트의 적절한 배합비율을 도출하기 위한 실험을 수행하였다. 또한 경화콘크리트 시험을 통하여 폴리머 개질 경량콘크리트의 물리적 특성을 고찰하였다. 그 결과 소량의 폴리머 첨가로도 휨강도가 증가하였으며, 실험결과를 바탕으로 회귀분석을 통한 압축강도 추정식을 제시하였다.

• 한국산업정보학회논문지
• /
• 제17권5호
• /
• pp.89-96
• /
• 2012

도로포장 반응모형의 구축을 위하여 새로운 방법론으로 부분최소제곱회귀모형의 활용성을 소개하고 실제 FWD 실험자료에 적용시켰다. 실증분석 결과 일반 다중회귀모형에서 발생된 다중공선성 문제를 부분최소제곱회귀모형을 통하여 해결방안을 제시하였으며, 변환된 자료가 아닌 원시자료를 이용하여 모형을 구축할 수 있다는 장점도 가지고 있다.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.883-889
• /
• 2009

The importance of cost estimate in early stage such has been increasing due to market change and severe competition in construction industry. Because the adjustable budget is only 20% after design stage, most of the crucial decisions to influence cost is made in the early stage. However, in the early stage, the project scope is not defined completely so that estimator has inaccurate information to make critical decision. Therefore, this research suggests the cost estimate method using case-based reasoning. Case-based reasoning is appropriate for the early cost estimating, as it has the strength of rapidity and convenience in cost estimation. This research analyzes 84 actual data of public apartment on the scale of 11~15 stories. In order to extract the most similar case, at the first step this research identifies influence factors and calculates attribute similarity. In case-based reasoning, the most challenging task is determining attribute weight. At the third step, this research calculates case similarity which is aggregated attribute similarity multipled by attribute weight. Finally, extracts the most similar case which has the highest score of case similarity.

• 동의생리병리학회지
• /
• 제19권5호
• /
• pp.1267-1271
• /
• 2005

To investigate the effect of the frequently used anti-obese medicine GyeongshinhaeGihwan 1 (GGT1), in food intake, body weight and food efficiency ratio for high fat diet induced obese male rats. Also, to value the diffences between GyeogshinhaeGihwan 1 and FDA approved Sibutramine in anti-obesity effect. High fat diet induced obese male rats were classified into four groups - positive control group, negative control group, GyeongshinhaeGihwan 1 group and Sibutramine group - and their food intake and body weight were observed for eight weeks. Anti-obesity effect was estimated with food efficiency ratio which is calculated by weight inclose divided by food intake. The result shown in Fig. 2 suggests that the GyeongshinhaeGihwan 1 group is more effective on food intake control than the Sibutramine group. Average weight variation shows an increase in both positive/negative control group and medication group. Also, the result in Fig. 3 indicates that average food efficiency ratio decreases contrary to the average weight variation. In addition, repeatedly estimated variance analysis on average food efficiency ratio of the GyeonushinhaeGihwan 1 group shows (1) the result corollary to the time of observation of food efficiency ratio was effective under 0.05 variance (P-value 0.000). The differences between each groups were not shown under 0.05 variance. Compared to the control group, medication groups were visually more effective on food intake control. Although both groups had a tendency of weight increasing, food efficiency ratio considering food intake and weight variation rate showed a decrease. Especially, the medication group variated less than the control group corollary to the point of time, proving the individuals react less sensitive to the medicine. Moreover, there were no differences in the anti-obesity effect between GyeongshinhaeGihwan 1 group and Sibutramine group studied by repeatedly estimating variance analysis(P-value: 0.610). When considering Sibutramine as an anti-obesity medicine approved by FDA, the point of being classifed in the same group proves the effect of GyeongshinhaeGihwan 1 as an anti-obesity medicine.

• 한국농림기상학회지
• /
• 제20권2호
• /
• pp.205-213
• /
• 2018

작물 모델의 개발과 검증에 사용되는 생체중 자료는 파괴적 샘플링을 통해 얻어져 왔다. 파괴적 샘플링이 가지는 단점을 보완하기 위해 저가형 3D 센서인 Kinect 센서와 무료 공개 소프트웨어들을 사용하여 생체중을 추정하는 기법을 개발하였다. 특히, 많은 작물모델들이 개발되어 있지 않은 배추를 대상으로 입체이미지를 생성하여, 그로부터 얻어진 부피와 생체중 추정치의 신뢰도를 분석하고자 하였다. 크기가 다른 배추 결구 부위를 스캔하기 위해 Kinect 센서와, Microsoft가 무상으로 제공하는 Software Development Kit 내 Kinect Fusion Explorer 프로그램을 사용하였다. 개별 배추의 입체이미지를 생성하기 위해 3D 그래픽 편집 소프트웨어인 Meshlab을 활용하여 배경과 불필요한 물체를 수동으로 제거하였다. 또한, 불완전한 입체모델로부터 생체중 추정을 위해 3D 프린터 소프트웨어인 Makerbot Desktop 을 사용하여 배추를 생성하기 위해 필요한 플라스틱 필라멘트 소모량을 추정하였다. 입체모델 편집 프로그램인 Blender를 사용하여 부피를 추정하였을 때, 실제 부피에 비해 17.6%에서 2160.6% 범위의 상당한 오차가 있었다. 반면, 필라멘트 소요량은 실제 배추 생체중 변이의 98.7%를 설명할 수 있었다. 또한, 이들의 상관관계는 5% 수준에서 유의하였다. 이러한 결과들은 직접적인 부피 계산 절차를 제외하더라도 간편하게 생체중을 추정할 수 있음을 확인하였다. Kinect 센서를 사용하여 배추의 생체중 추정이 가능하다는 것이 확인 되었으나, 기존의 고가형 3D 센서에 비해 낮은 해상도와 주간에 활용이 어려운 점이 있다. 그럼에도 불구하고, 배추 생육 모델의 시계열적 검증 자료를 Kinect 센서를 이용하여 간편하고 신속하게 획득할 수 있어 모델의 불확도를 감소하는 데에 기여할 수 있을 것으로 판단된다. 따라서, 후속 연구에서 보다 저렴한 가격대의 3D 센서들을 대상으로 야외 및 주간조건애서 작물의 생체중 측정 가능성에 대해 검토하고 작물 모형 개발 및 개선을 위한 기술개발이 이루어져야 할 것으로 사료된다.