• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.1-8
• /
• 2020

This paper studied a method of estimating target information using a radar in wireless communication. Position information on the target can be estimated angle, distance and velocity. The velocity information can be estimated since the Doppler frequency is changed in the moving target. The signal incident on the receiving array antenna is multiplied by the delay time and the reference signal to represent the output signal. This output signal is estimated by applying FFT (Fast Fourier Transform) after calculating signal correlation through correlation integrator. Since the output signal must be calculated within the correlator, it should be processed with the Dwell time. The correlation signal of the correlation integrator outside this Dwell time is indicated by the velocity measurement error. The FFT is applied to the signal that has passed through the correlated integrator in order to estimate the distance of the signal. The Doppler resolution must be improved because the FFT estimates target information using the Doppler information. The Doppler resolution decreases with increasing the integration time. The velocity information estimation should have no spread of the velocity. As a result of the simulation, there was no spread of the target velocity in this study.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.236-248
• /
• 2017

A direct stator flux vector control scheme in discrete-time domain is proposed in this paper for the interior permanent magnet synchronous motor (IPMSM) drive to remove the proportional-integral (PI) controller from the direct torque control (DTC) scheme applied to IPMSM and to obtain faster dynamic response and lower torque ripple output. The output of speed outer loop is used as the desired torque angle instead of the desired torque in the proposed scheme. The desired stator flux vector in dq coordinate is calculated with a given amplitude. The state-space equations in discrete-time for IPMSM are established, the actual stator flux vector is estimated in deadbeat manner by a full-order state observer, and then the closed-loop control is achieved by the pole placement. The stator flux error vector is utilized to calculate the reference stator voltage vector. Extracting the angle position and amplitude from the estimated stator flux vector and estimating the output torque are eliminated for the direct feedback control of the stator flux vector. The proposed scheme is comparatively investigated with a PI-SVM DTC scheme by experiment results. Experimental results show the feasibility and advantages of the proposed control scheme.

• Journal of KIISE:Software and Applications
• /
• v.36 no.6
• /
• pp.462-470
• /
• 2009

We propose a wearable system to help the visually impaired persons for walking safely to destination. If a user selects a destination, the system guides the user to destination with position data from GPS receiver and shortest path algorithm. At the same time, after acquiring complex spatial structures in front of the user with ultrasonic sensors, we categorize them into several predefined patterns, and determine an avoidance direction by estimating the patterns. As a result, visually impaired persons can arrive at destination safely and correctly without others help.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.4 s.142
• /
• pp.388-395
• /
• 2005

A numerical procedure is proposed as a mesh-size insensitive structural stress definition that gives a stress state at a weld toe with relatively large mesh size. The structural stress values obtained using different finite element types, i.e. shell element and solid element, are examined for typical weld structures. The calculation procedures are performed using the balanced nodal forces and moments obtained from finite element solutions. A consistent formulation based on work equivalent argument has been implemented to transform the balanced nodal forces and moments from shell to line force and line moments at each nodal position. The mesh-insensitivity, the effect of distance $\delta$(where the stress is calculated) and the potential limitations of the structural stress method are examined for various types of weldments. Based on the results from this study, it is expected to develop a more precise stress estimation technique for fatigue strength assessment of welded structures.

• Journal of the Korean Home Economics Association
• /
• v.40 no.11
• /
• pp.157-170
• /
• 2002

This study is an attempt to establish an aesthetic and fashion sense of the heroine's image and fashion according to the social environment which is related to fashion transformation. Also, this study modem society's need for specific social occupational roles through fashion and clothing in cinema. first, individual people are estimating their social position and ability by his/her fashion style. Modem fashion styles are changing into various, complicated, gorgeous and attractive styles; however, the needs of professional women's clothing styles are fairly conservative. Second, classical, closed, and unobtrusive fashion styles are appearing in modem cinema's clothing depending on professional women's expertise in fashion styles. Third, changes of styles are varied by their colors and clothing design. Colors had not changed very much during the last 30 years; however, in the 1980's, white and grey colors, in the 1990's black and achromatic colors, and in the beginning of this century dark green and brown and also diverse colors have been used. But the brightness is so light and expressed by a quiet and cold style. Furthermore, the inner images are judged by their forms which is determined by how people choose their clothing styles. Consequently, women's clothing styles easily appear as a result of their preconceived ideas formed by their professional knowledge and ability.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.391-398
• /
• 1998

The intake noise, a major source of vehicle noises, has rapidly become a noticeable, and has been studied to reduce the level. Traditionally, the intake system has been developed through the road test and the experiment using a engine dynamo, namely, the trial and error process. This approach require very high cost and long time consuming to develop the system. In this study, the simulator which had a speaker in the cylinder head was presented. It was easy to analyze the acoustic characteristic of the intake system in laboratory environment. This study presented a improvement to reduce the level of the intake noise using the Transfer Matrix Method and NIT/SYSNOISE, FE analysis commercial software. It was to select optimum position of a resonator and verified by the simulator. This simulator can be used early in the design stage of development of the intake system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.1
• /
• pp.56-61
• /
• 2017

This paper presents a data prediction method and its application to haptic-based teleoperation systems. In general, time delays inevitably occur during data transmission in a network environment, which degrades the overall performance of haptic-based teleoperation systems. To address this situation, this paper proposes an autoregressive moving average (ARMA) model-based data prediction algorithm for estimating model parameters and predicting future data recursively in real time. The proposed method was applied to haptic data captured every 5 ms while bilateral haptic interaction was carried out by two users with an object in a virtual space. The results showed that the prediction performance of the proposed method had an error of less than 1 ms when predicting position-level data 100 ms ahead.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.1
• /
• pp.1-6
• /
• 2014

This paper describes a method of estimating and evaluating the volumetric errors of multi-axis machine tools. The estimation method is based on a generic model that was developed from conventional kinematic error models for the geometric and thermal errors to help predict the volumetric error easily in various configurations. To demonstrate the advantages of the model, an application in the early stages of a five-axis machine tool design is presented as an example. The model was experimentally evaluated for a four-axis machine tool by using the data from ISO230-6 and R-test measurements to compare the estimated and measured volumetric errors.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.9
• /
• pp.741-748
• /
• 2001

In this paper, we propose a method of tracking and capturing a moving object by a mobile robot. The position of the moving object is acquired from the relation through color-based image information from a 2-DOF active camera mounted on the mobile robot. The direction and rotational angular velocity of the moving object are estimated using a state estimator. A Kalman fiber is used as the state estimator for taking characteristics of robustness against noises and uncertainties included in the input data. After estimating the trajectory of the moving object, we decide on the optimal trajectory and plan the motion of the mobile robot to capture the target object within the shortest distance and time. The effectiveness of the proposed method is demonstrated by the simulations and experiments.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.9
• /
• pp.1325-1333
• /
• 2017

The sensorless control of blushless DC motor(BLDCM) is based on the $120^{\circ}$ control in which the back electromotive force(Back EMF) for estimating the position of the rotor can be detected. However, the $120^{\circ}$ control has a disadvantage that the torque constant is small as compared with $180^{\circ}$ control which can not detect the back EMF. The $150^{\circ}$ control which complements these problems makes it possible to detect the back EMF and improve the torque constant by 12.5% compared to the $120^{\circ}$ control. Therefore, this paper compares the output characteristics of BLDCM through finite element method analysis (FEA) by the conventional and proposed control methods of BLDCM for water circulation system and proposes design for downsizing and weight reduction of BLDCM according to secured torque constant. The validity of the proposed control and design proposal is proved through simulation and experimental results by comparing the output characteristics of $120^{\circ}$ control and $150^{\circ}$ control.