• Journal of Korean Society of Forest Science
• /
• v.106 no.2
• /
• pp.219-229
• /
• 2017

Forest road is an essential infrastructure for forest management such as the composition and management of forest resources, timber and forest byproduct production & transportation. It has recently been utilized forest recreation and forest sports as well as also forest pest control, forest fire prevention and evolution. When you build a forest road, the economic function in the forest is activated, so that it can result in the ripple effect of induced employment, value-added creation and production inducement. The purpose of this study is to analyze the impact caused by forest road construction occurring as the overall economy. For analysis it was applied to inter industry analysis method that is a method for analyzing the quantitative cross-correlation. The data were used in the Input-Output Tables In 2014, the Bank of Korea. When you build a forest road, economic effect due to the construction of the forest road is generated and economic effects are also generated due to the increase in the production of forest products after the construction of the forest road. Therefore, we will analyze the economic impact of the two effects. The estimated economic value of forest products, which is the economic effect of forest product cultivation, was calculated through some assumptions and the economic ripple effect was analyzed. The forest road construction sector is defined as land clearing and reclamation, and irrigation project construction and the forestry forest products sector is defined as the sum of raw timber, edible forest products and misc. forest products. In total, 32 sectors were classified, and except for the two sectors defined as forest road construction and forestry forest products, the remaining sectors were integrated according to the classification system of 30 integrated classifications of the Bank of Korea. As a result, the production inducement coefficient for forest construction was analyzed to be 2.767 and the production inducement coefficient for forestry forest products was analyzed to be 1.565. This means that 2,767 times the production of forest road construction investment is induced in the whole industry and the production of 1.562 times the amount of forestry forest products is caused by the whole industry as the production of forestry forest products increases. The value added inducement coefficient for forest road construction was 0.977 and the value added inducement coefficient for forestry forest products was 0.985. Forest road are essential infrastructure for forestry development and should be continuously invested because they are essential elements of timber production and forest byproduct production with functions such as forest management, forest recreation, forest sports, and town connection.

• Journal of Energy Engineering
• /
• v.26 no.2
• /
• pp.80-92
• /
• 2017

This paper attempts to estimate the diesel fuel demand function in Korea using panel data panel data of 16 major cities or provinces which consist of diesel demands, diesel market prices and gross value added from the year 1998 to 2015. I apply panel GLS(generalized least square) model, fixed effect model, random effect model and dynamic panel model to estimating the parameters of the diesel fuel demand function. The results show that short-run price elasticities of the diesel fuel demand are estimated to be -0.2146(panel GLS), -0.2886(fixed effect), -0.2854(random effect), -0.1905(dynamic panel) respectively. And short-run income elasticities of the diesel fuel demand are estimated to be 0.7379(panel GLS), 0.4119(fixed effect), 0.7260(random effect), 0.4166(dynamic panel) respectively. The short-run price and income elasticities explain that demand for diesel fuel is price- and income-inelastic. The long-run price and income elasticities are estimated to be -0.4784, 1.0461 by dynamic panel model, which means that demand for diesel fuel is price-inelastic but income-elastic in the long run. In addition I apply dummy variable model to estimate the effect of 16 major cities or provinces on diesel demands. The results show that diesel demands is affected 10 regions on the basis of Seoul.

• Environmental and Resource Economics Review
• /
• v.22 no.4
• /
• pp.817-841
• /
• 2013

The purpose of this study is to examine feasibility of the 'Master Plan of 2013 Slow Food Expo(2013 AsiO Gusto), Korea' and to analyze the following economic effect. To this end, we used existing data and statistics, and estimated the demand by means of survey for people's traveling and questionnaires for ordinary Koreans. For examining financial feasibility for hosting the Expo, BC ratio (Benefit-Cost Ratio) and NPV (Net Present Value) was applied. For estimating the economic effect following the Expo, the effect on all over the country and the Gyeong-gi province was analyzed, using the MRIO (Model of Regional Input-Output). Specifically, with the net effect of Expo, the economic feasibility test shows 1.04~2.15 BC ratio with 10% free admission, and 1.02~2.27 BC ratio in Finance analysis. Furthermore, the Expo feeds through Gyeong-gi (including Nam-yang-ku) regional economies with production induction effect, value-added induction effect, and employment induction effect. The amounts of regional effects are 373.6~738.7 billion won, 166.2~327.4 billion won, and 1,971~2,009 persons, respectively. Also, the "2013 Slow Food Expo, Korea" was analyzed profitable in general. Residents in Nam-yang-ju expects the Expo to bring vitalities into their hometown. The Expo is highly related to the positive economic effectiveness of Nam-yang-ju.

• Korean journal of food and cookery science
• /
• v.27 no.6
• /
• pp.793-801
• /
• 2011

We examined the quality characteristics of obtaining the optimal curing conditions for black garlic extract (BGE) added mackerel by using response surface methodology (RSM). The condition of RSM was included in 13 experimental points using two dependent variables: concentration of BGE (2.6~12.5 brix, X1) and curing time of BGE (17.58~102.42 min, X2). An assessment was conducted with four replicates on three independent variables: volatile basic amine (VBN, Y1), thiobarbituric acid (TBA, Y2), and shear force (Y3). The minimum content of VBN was 1.625 mg% at 3.17 brix, for 80.5 min. This was obtained when the BGE concentration was lower and the curing time was longer. The content of the TBA was 3.13~12.24 MA mg/kg at experiment range and the stationary point was at saddle point. Therefore, by using ridge analysis, the minimum point of TBA was 2.414 MA mg/kg at 3.5 brix for 84.4 min. The truth coefficient of the BGE concentration and curing time were 2.9 brix and 75.1 min, respectively, with a shear force ($120.764cm/kg^2$) shown at maximum point. The optimum Hunter color range was estimated from the lowest TBA value. The optimum range of the L color was 39.16~40.26, a and b color were 4.40~4.88 and 12.35~13.20, respectively.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.7
• /
• pp.63-72
• /
• 2013

This study estimated stabilization efficiency of As and heavy metal contaminated agricultural soil in abandoned mine through pot experiment. Also contaminants uptake of plant (lettuce) was compared as function of amendment (limestone, steelmaking slag and the mixture of these) addition. In soil solution analysis, concentration of contaminants in soil solutions which added limestone or steelmaking slag were lower than that of the mixture. Especially in As analysis, concentration with 5% (wt) addition of steelmaking slag showed the lowest value among those with other amendments. This seems that As stabilization happens through Fe adsorption during precipitation of Fe by pH increasing. Leachability of As in stabilized soil by TCLP was represented similar result with soil solution analysis. However leachability of heavy metals in stabilized soil was similar with that of non-stabilized soil due to dissolution of alkali precipitant by weak acid. Contaminants uptake rate by plant was also lower when limestone or steelmaking slag was used. However this study revealed that concentration of contaminants in soil solution didn't affect to the uptake rate of plant directly. Because lower $R^2$ (coefficient of determination) was represented in linear regression analysis between soil solution and plant.

• Water for future
• /
• v.15 no.3
• /
• pp.23-36
• /
• 1982

The stochastic variations and structures of time series data on water quality were examined by employing the techniques of autocorrelation function, variance spectrum, Fourier series, autoregressive model and ARIMA model. These time series included hourly and daily observation on DO, turbidity, conductivity pH and water temperature. The measurement was made by automatic recording instrument at Noryangjin and Dook-do located in the downstream part of Han River during 1975 and 1976. Hourly water quality time series varied with the dominant 24-hour periodicity, and the 12-hour periodicity was also observed. An important factor affecting 24-hour periodic variation of DO is believed to be photosynthesis by algae. These phenomena might be attributable to periodic discharges of municipal sewage. Noryangjin site showed the more distinct 12-hour periodicity than Dook-do site did, and tidal effect might be responsible for the difference. The water quality, as measured by DO and turbidity, was better in the afternoon compared with the quality in the morning. This change can be explained by the periodic variation of DO, temperature and the amount of municipal wewage discharge. It was also observed that the water temperature at Noryangjin was higher than the temperature at Dook-do. This difference might have been caused by the pollutants that were added to the section between two sites. The correlation coefficients between some of the variables were fairly high. For example, the coefficient was -0.88 between DO and water temperature, 0.75 between turbidity and river flow, and 0.957 between water temperature and air temperature. The lag time of heat transfer from the air to the water was estimated as 24 days. The first order auto-regressive model was appropriate for explaning standardized hourly DO time series. The ARIMA model of (1, 0, 0) type provided relatively satisfactory results for daily DO time series after the removal of significant harmonic value.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2133-2141
• /
• 2011

The environment of the health food in the world has been changed very rapidly. The world market volume of functional drinks in 2012 will be estimated at $ 26.9 billion, and Asia-Pacific market is expected to be $ 13.6 billion. The domestic market volume of bottled water in 2008 was 440 billion won, and "Jeju Samdasu" sales was 89.1 billion won. But the brand of "Jeju Samdasu" has the limits. As a solution, the comprehensive advertising of the excellence quality of Jeju water is required. To increase the likelihood of success in development of functional and mixed drinks by the water is necessary to develop a global integrated brand. In developing the functional and mixed drinks by the water, we apply the functionality of the Jeju agricultural products actively, and connect Jeju Water industry with Jeju agricultural industry, which promote the overproduction control and the high value- added agricultural products.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.36-36
• /
• 2011

We synthesized new dye sensor based on indole compound. Through the UV-vis absorptions, we analyzed chemosensing properties to explain metal binding properties. The peak absorptions increased at 472 nm when added metal cations($Cd^{2+}$, $Cu^{2+}$, $Hg^{2+}$, $Fe^{2+}$, $Zn^{2+}$, $Ni^{2+}$ and $Cr^{3+}$) and gradually decreased the peak at 516 nm. Thus, this UV-Vis absorption behavior clearly showed the metal binding reaction. To measure energy level of used dye sensor, HOMO/LUMO energy value was calculated with cyclovaltagramm(CV) and using computational calculation method, in which we estimated the optimum structure of dye sensor. CV and computational calculation method, both compared to find suitable geometric structure. (with almost same energy values.) From the computational calculation, dye sensor has plane structure. So, Amine and ketone in the dye sensor faced each other and makes position to bind metal cations. In addition, these positions was supported pull-push electron system and generated MLCT process, when the dye sensor was bonded with the metal cations and resulted chemosensing properties. Through the electrochemical and computational calculation method analyze, we proposed the chemosensing principles that the dye sensor bind the metal cation between ketone and amine. Finally, the formation type of metal ion bindings was determined by Job's plot measurements.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1299-1309
• /
• 1998

In this paper, we propose a new approach for reducing the blocking artifact that is one of drawbacks of the block-based Discrete Cosine Transform (DCT) without introducing additional information or significant blurring. We modify the inter-block discontinuity minimization technique to preserve edges within a block as well as to reduce visible block boundaries. The homogeneity of each block is decided by the threshold value reated to Q-factor, which is included in a JPEG as well as MPEG streams. The quantization error is estimated by minimizing the discontinuity, which is weighted in proportion to block discontinuity and added to each pixel in the block to compensate block artifacts. The proposed algorithm reconstructs images which have less noticeable block boundaries from a subjective viewpoit without anyconstraints.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.884-892
• /
• 2011

The analysis of the tourist industry in relation to the general industries is of high use as a means to measure an economic effectiveness as the interest in the policy of service industry increases. From the Input-Output Tables of both 2007 and 2008, Inverse Matrix Coefficients, Imports Requirement Coefficients, and Value Added Requirement Coefficients have been derived. As a result of analysis, the main indexes of the industry-related analysis have almost no differences as compared with those of the 1980s. In spite of the reduction in the scope of the tourist industry in this paper, it is estimated that the reason why the above-mentioned result has been derived is that the influence of today's tourist industry grows bigger than that of the past. In the future studies, the agreement on the classification of tourist industry is requested. In addition, all kinds of calculations have to be derived in general, and the general parts of the tourist industry have to be analyzed in details.