• 대한치과보철학회지
• /
• 제29권2호
• /
• pp.129-145
• /
• 1991

The purpose of this study was to analyze the stresses and displacements of various esthetic restorations and abutment teeth. The finite element models of central incisor were divided into four groups according to the types of restoration. Three load cases were applied; 1) 45 degrees on the incisal edge, 2) horizontal force on the labial surface, and 3) 26 degrees diagonally on the lingual surface. Material property, geometry, and load conditions of each model were inputed to the two dimensional finite element program and stresses and displacements were analyzed. Results were as follows; 1. In the cases of porcelain fused gold ann and porcelain laminate venner, stresses were equally distributed in supporting abutment tooth. 2. The metal coping of porcelain fused gold u and collarless porcelain fused gold crown functioned as a good stress distributor. 3. When the horizontal load applied, the highest tensile and compressive stresses were seen in the cervical margin of restoration and the dentin of the abutment tooth. 4. The highest displacement of restoration was seen when load was applied at an mee of 26 degrees diagonally in lingual surface of tooth in centric occlusion. 5. The influence of loading direction on the stresses and displacements in the restoration was greater than that of various design. 6. The possibility of fracture was highest in porcelain jacket crown.

• 대한치과보철학회지
• /
• 제57권2호
• /
• pp.160-170
• /
• 2019

상악 전치부와 같은 기능 및 심미성의 개선이 조화롭게 요구되는 부위의 치료 시에는 다른 부위보다 더 많은 지식과 기술을 필요로 한다. 특히 전방 유도(anterior guidance)를 결정하는 상악 전치부 설면 외형을 제대로 형성하지 못하면, 기능적인 불편감과 함께 전체 치열의 불안정성을 야기한다. 적절한 원리를 이용하여 전방유도를 설정한 후 임시 수복물 제작 및 조정을 통해 조화로운 전방 유도를 확보했다면 임시 수복물의 설면 외형을 최종 보철물로 정확하게 재현하는 방법에 대해 주의 깊게 고려해야 할 필요가 있다. 본 증례에서는 체계적인 진단 및 치료를 위하여 수정된 Dahl 원리(modified Dahl principle) 및 computer-aided design/computer-aided manufacturing (CAD/CAM) 시스템의 복제 기법(copy-milled)을 이용하여 적절한 전방 유도를 설정하고, 지대치의 디지털 이미지와 임시 수복물의 디지털 이미지를 중첩시켜 보다 정확하게 보철물 형태를 재현하고자 하였다. 이에 기능적, 심미적 개선을 도모하여 환자와 술자 모두에게 만족스러운 치료결과 및 예후를 얻었기에 보고하는 바이다.

• Journal of Periodontal and Implant Science
• /
• 제40권4호
• /
• pp.188-193
• /
• 2010

Purpose: The aim of this study is to assess the influence exerted by the observer's dental specialization and compare patients' opinion with observers' opinion of the esthetics of maxillary single-tooth implants in the esthetic zone. Methods: Forty-one adult patients, who were treated with a single implant in the esthetic zone, were enrolled in this study. Eight observers (2 periodontists, 2 prosthodontists, 2 orthodontists and 2 senior dental students) applied the pink esthetic score (PES)/white esthetic score (WES) to 41 implant-supported single restorations twice with an interval of 4 weeks. We used a visual analog scale (VAS) to assess the patient's satisfaction with the treatment outcome from an esthetic point of view. Results: In the PES/WES, very good and moderate intraobserver agreements were noted between the first and second rating. The mean total PES/WES was $11.19{\pm}3.59$. The mean PES was $5.17{\pm}2.29$ and mean WES was $6.02{\pm}1.96$. In the total PES/WES, the difference between the groups was not significant. However, in the WES, the difference between the groups was significant and prosthodontists were found to have assigned poorer ratings than the other groups. Periodontists gave higher ratings than prosthodontists and senior dental students. Orthodontists were clearly more critical than the other observers. The statistical analysis revealed statistically significant correlation between patients' esthetic perception and dentists' perception of the anterior tooth. However, the correlation between the total PES/WES and the VAS score for the first premolar was not statistically significant. Conclusions: The PES/WES is an objective tool in rating the esthetics of implant supported single crowns and adjacent soft tissues. Orthodontists were the most critical observers, while periodontists were more generous than other observers. The statistical analysis revealed a statistically significant correlation between patients' esthetic perception and dentists' perception of the anterior tooth.

• Journal of Periodontal and Implant Science
• /
• 제38권3호
• /
• pp.557-564
• /
• 2008

Purpose: Various methods are used in clinical crown lengthening procedure, Esthetic is more important in anterior region than in posterior region. Therefore when performing clinical crown lengthening procedure in esthetic region, clinicians should choose method which doesn't impair esthetic. Surgical extrusion could be a good method to achieve esthetic results. Material and Methods: Two patients were scheduled to clinical crown lengthening procedure in esthetic region. Teeth were extruded with periotome carefully to the intended level. Extruded teeth were anchored with sutures. Sutures are removed after 7day. Restorations were seated after extruded teeth were stabilized. Result: Five to six months later, both cases showed favorable esthetic outcome that were harmonious with adjacent teeth. Conclusion: When clinicians are to do clinical crown lengthening procedure in esthetic region, predictable esthetic outcome could be achieved with surgical extrusion.

• 대한심미치과학회지
• /
• 제24권2호
• /
• pp.101-121
• /
• 2015

지르코니아 폴리크리스탈은 (Y-TZP) 다른 치과용 세라믹에 비해 기계적 강도와 파절저항성이 우수하다. 지르코니아 기반 세라믹은 캐드캠 시스템을 바탕으로 고정식 수복물 제작에 성공적으로 소개되어 왔다. 이는 고정식 수복물을 위한 금속 구조물의 임상적 대안으로 제시되었다. 지르코니아 수복물의 가장 흔한 합병증은 상부 도재의 파절이다. 다른 옵션은 고도로 반투명한 지르코니아를 전부지르코니아 고정식 수복물로 사용하는 것이다. 본 논문에서는 전부지르코니아 수복물의 장점, 지르코니아 수복물의 임상적용, 지대치 삭제, 대합치 마모, 지르코니아와 레진시멘트와의 접착, 그리고 기공소와의 의사소통에 관하여 보고하였다.

• 대한치과보철학회지
• /
• 제57권4호
• /
• pp.425-431
• /
• 2019

본 임상증례는 전치부 영역에서 안면영상, 콘빔 컴퓨터 단층촬영 그리고 구내 스캔영상을 이용하여 보철물을 시각화하는 과정을 보여준다. 이러한 접근 방식은 임상과 기공 그리고 환자 측과의 소통을 향상시킨다. 환자가 상악 중절치의 외상 후 보철치료를 위해 내원하였고, 전신 건강 상태는 양호하였다. 안면연상, 콘빔 컴퓨터 단층촬영 그리고 구내 스캔영상을 이용하여 가상 환자 모형을 제작하였다. 최종 보철물의 제작 전 보철물 디자인 영상이 환자에게 제시되었고, 환자의 의견을 반영하여 형태를 수정하였다. 이러한 디지털 작업 과정은 최적의 심미 보철물의 제작을 용이하게 하고, 보철물의 예측성을 향상시킨다.

• 대한심미치과학회지
• /
• 제7권1호
• /
• pp.18-26
• /
• 1998

The improvement of esthetic dentistry has been accelerated from the development of composite resin and dentin-enamel adhesive since 1980's. The indirect composite resin restorations have more accurate proximal contact point and occlusal form than direct restoration. And the side effect of resin shrinkage is minimal because the amount of composite used in oral cavity is limited in cement space. As a results, marginal leakage, hypersensitivity, secondary caries, and discoloration are significantly diminished. The first generation laboratory composite resin used in indirect resin restoration had been widespread in 1980's and the second generation laboratory composite resins were developed in 1990's. The second generation laboratory composite resins are called Ceramic Polymer. The physical properties of Ceramic Polymer are improved because of high content of inorganic filler, and the esthetics and biocompatibility are better than that of the first generation resin. So the application range using composite resin have been broadened. The purpose of this paper is to introduce Targis & Vectris system that is classified to second generation laboratory composite and to report several cases in which the system was utilized for restoration.

• 대한치과보철학회지
• /
• 제38권3호
• /
• pp.366-374
• /
• 2000

FRC/ceromer system provides the clinician with a durable, flexible, and esthetic alternative to conventional porcelain fused to metal crowns. FRC is the matrix which is silica-coated and embedded in a resin matrix. The ceromer material which is a second generation indirect composite resin contains silanized, microhybrid inorganic fillers embedded in a light-curing organic matrix. FRC/ceromer restoration has a several advantages: better shock absorption, less wear of occluding teeth, translucency, color stability, bonding ability to dental hard tissues, and resiliency. It has versatility of use including inlay, onlay, single crown, and esthetic veneers. With adhesive technique, it can be used for single tooth replacement in forms of inlay adhesion bridge. In single tooth missing case, conventional PFM bridge has been used for esthetic restoration. However, this restoration has several disadvantages such as high cost, potential framework distortion during fabrication, and difficulty in repairing fractures. Inlay adhesion bridge with FRC/ceromer would be a good alternative treatment plan. This article describes a cases restored with Targis/Vectris inlay adhesion bridge. Tooth preparation guide, fabrication procedure, and cementation procedure of this system will be dealt. The strength/weakness of this restoration will be mentioned, also. If it has been used appropriately in carefully selected case, it can satisfy not only dentist's demand of sparing dental hard tissue but also patient's desire of seeking a esthetic restorations with a natural appearance.

• 대한심미치과학회지
• /
• 제9권1호
• /
• pp.82-90
• /
• 2000

치과 재료분야는 그 동안 많은 발전을 해왔음에도 불구하고 자연치아의 색조 재현 및, 인접 치와의 조화에 따른 심미성과 지대치와의 적합성 등에 많은 문제가 야기되어왔다. 기존 all ceramic 은 단관 제작 시 심미적인 요구가 다소 해결되었으나 bridge work 에 있어서는 그 강도 및, 작업의 효율성은 여전히 문제시되어 오고 있다. 최근 기존 Inceram의 단점을 보안한 Celay Inceram system은 spinell, alumina, zirconia Blanks를 이용하여 더욱더 기능적인 자연스러움으로 접근되어진다. 이에 그 system의 alumina blank를 이용한 bridge work 의 임상 증례를 살펴보기로 한다.

• 대한심미치과학회지
• /
• 제27권1호
• /
• pp.51-61
• /
• 2018

치과 임상에서 임시치아 제작은 중요한 과정 중 하나이지만 이를 별로 신경 쓰지 않는 임상가도 있다. 대다수 임시치아는 말 그대로 잠시 쓰는 것이기에 빠르고 저렴하게 만들면 된다는 생각이 더 많을 것이다. 시대가 변화하면서 빠르고 비교적 간편하게 만들 수 있는 치과용 CAD/CAM이 보급됨에 따라, 점차 임시치아 제작도 디지털화 되고 있다. 편한 것도 좋지만 무엇이든지 장단점이 존재한다. 이 글에서는 지금이 마지막 세대일 것 같은 '아나로그식 심미적인 전치부 임시치아 제작법'에 대해 살펴보고자 한다.