• 한국토양비료학회지
• /
• 제47권2호
• /
• pp.80-84
• /
• 2014

Phosphorus (P) is an essential nutrient for all living organisms. P is mostly obtained from mined rock phosphate. However, existing rock phosphate reserves could be exhausted in the next 50-100 years. As Korea is totally dependent on imported rock phosphate, we should seek for solution to overcome the P depletion by efficient use and recycling. For this, this study suggested a P flow model to identify the location and flow route of P in urban area based on traditional material flow analysis. The type of P entering the urban areas are fertilizer, food and feed. Each type of P is used in agriculture, human consumption and animal husbandry. After going through each process, P is moved to waste management facilities within food waste, excreta and sewage. Some portion of P in waste are buried, incinerated and discharged, which can be reservoir of P in the future.

• International Journal of Quality Innovation
• /
• 제9권3호
• /
• pp.57-69
• /
• 2008

This paper posits that arm's length buyer-supplier relationship as the intermediate type between market exchange relations and strategic partnership might be advisable, and information technology may have a role as a mechanism actualizing the effects of such arm's length relationship by strategic supply-line diversification. Based on the theoretical analysis on interactive feedback relationships among IT level, buyer-supplier relationships, and supply chain structure, we suggest a set of advisable buyer-supplier relationship type for efficient supply chain management. Also, doing so would be helpful in suggesting a dynamic IT investment and adoption model appropriate for the establishment of productive buyer-supplier relationship, and further in providing theoretical foundations and practical guidelines on the role and function of B-to-B E-commerce for efficient SC integration.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1998년도 추계종합학술대회
• /
• pp.450-455
• /
• 1998

This paper proposes an enhanced transport protocol for multipeer communications. It is assumed that there exists a transport connection owner that takes the roles of the establishment, management and termination of a transport connection. The proposed protocol classifies the data transfer type into simplex, duplex and N-plex multicasts and provides several transport services to support various requirements in group communications. The general operations and reliability controls of each transfer type are different from one another and carried out by a shared control tree. The QoS negotiation is performed during the creation phase. The notification of negotiated values is followed by an acknowledgment procedure for confirmation. The four-way handshake is introduced. After negotiation, such a resource reservation protocol as RSVP can reserve system and network resources according to the arbitrated values. This paper suggests a conceptual model of the transport layer and its protocol behaviors over the IP multicast and RSVP network.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권5호
• /
• pp.218-223
• /
• 2005

Impedance matching characteristics of planar type inductively coupled plasma sources are investigated utilizing the previously reported two-dimensional theory[1] of the anomalous skin effect. Two types of matching networks are considered, and the values of the circuit elements are expressed as functions of various reactor parameter. Also, two cases of perfect and imperfect matching conditions are considered and the functional dependence of the values of matching capacitance and reflection coefficient on the various reactor parameters are investigated using the present circuit model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.76-78
• /
• 2000

The previous MCC's have the demerits of high cost and much manhour for rework because they are impossible for the standardization of products and have many manual connections. The customers require the products which can operate in connection with SCADA system by digitalizing the functions of the current MCC's and are systematized with capability of remote control. To solve these disadvantages and requirements, we developed the Electronic Motor Control System according to starting type for applying to fields based on this. This system has the various functions such as protection, measurement, and communication. Using these functions, it can monitor motor status through communication with the upper system and define the circuit for lower connection cost according to starting type and shorter manufacture period by program. The development of this product results in establishment of competitive structure with domestic competition and perfect automatic monitoring through linkage with SCADA system. In addition, it provides the comparable dominancy of receiving on orders in switch gear and adaptability to change of MCC market in Japan and Europe.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.45-50
• /
• 1998

This study is aimed for investigating the rheology property and fluidity of superplasticizer which is necessary using for high flowing concrete fluidity establishment. Therefore, this study is analysis the rheology property and fluidity by different according temperature and elapsed time. From the results, the fluidity and rheology value were different according temperature. Over 2$0^{\circ}C$, the flow value of A, B, C, D, E type is increased, according as the increase of temperature, but the flow value of F type is decreased.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1650-1655
• /
• 2007

A lights-out detector, which helps the person in charge of maintenance make a quick judgment in the event of a failure of LED-type traffic lights, was explored/developed and installed/ tested, at Seoul Metro, after they developed a patented pilot product in 2005; and, a product improvement test was conducted to ensure reasonable maintenance of signaling facilities. Having better compatibility with existing circuit in use and displaying stable load current, the device makes the maintenance of lights-out detection and alert easier.

• 한국대기환경학회지
• /
• 제8권4호
• /
• pp.262-268
• /
• 1992

The trend of international concerns on environmental conservation and domestic demand of ambient air quality improvement, specially on sulfur dioxide level has resulted in the establishment of mid-term strategy of environmental improvement and stepwise strengthening of emission regulations in this decade in Korea. Development of flue gas desulfurization(FGD) process is becoming an essential task to be accomplished especially for the power plants and large industrial facilities. This study is an initial stage researc focusing on the mass transfer principles in wet type FGD process and the effects of operating variables of a jet bubbling scrubber utilizing limestone slurry on sulfur dioxide removal efficiency. Experimental results showed this type of scrubbing system has some advantages in terms of mass transfer mechanism and removal efficiency. More rigorous research is needed for the reaction system and the comparison with existing FGD processess for the possible development of a process which is compatative in view of installation cost and treatment of by-products.

• 산업공학
• /
• 제9권3호
• /
• pp.269-282
• /
• 1996

This paper introduced a procedure for improving the quality of group decision making in various task types. Emphasis is placed on the construction of the optimal GDSS(Group Decision Support System) design with identifying the group decision characteristics of decision stages on the various task types. Especially, the identification of outliers and the establishment of confidence limits in group decision making were stressed. Participants in group decision making whose 'opinions fall outside the group's tolerance level are further studied to annex the source of this variation. The result showed that a preparation stage in the generating idea-type task and a illumination stage in the negotiating-type task were critical. Furthermore, the degree of the disagreement was severe in the verification and the preparation stages on group decision making. This paper developed a general procedure for improving the quality of group decision making. The procedure presented helps in identifying those stakeholders whose opinions may significantly deviate from that of the group.

• 한국안전학회지
• /
• 제8권1호
• /
• pp.64-70
• /
• 1993

Serious injuries and deaths due to multi-jointed robot occur when a man mispercepts. especially during robot teaching and maintenance work. Since industrial robots often operate with unpredictable motion patterns, establishment of safe speed limit of robot arm is indispensable. An experimental emergency conditions were simulated with a multi-jointed robot. and response characteristics of human operators were measured. The result showed that failure type, robot arm axis. and robot arm speed had significant effects on human reaction time. The reaction time was slightly increased with robot arm speed. though it showed somewhat different pattern owing to failure type. Furthermore the reaction time to the axis which could flex or extend. acting on a workpiece directly. was fastest and its standard deviation was small. The robot arm speed limit securing a‘possible contact zone’based on overrun distance was about 25cm/sec. and in this sense the validity of safe speed limits suggested by many precedent researchers were discussed.