• 교육녹색환경연구
• /
• 제16권2호
• /
• pp.1-9
• /
• 2017

Defect dispute in apartment building has become a debating social issue. The system of defect lawsuit and the conciliation process are applicable to solve defect problems in South Korea. Among various defects, painting work defect is a critical issue because it requires large area works and entails a lot of cost. Accordingly, disputes on work procedure and cost calculation are argued oftenly between residents and housing providers. This study reviewed detailed main issues of painting work and propose relevant systems and standards. In this analysis, the main issues are categorized into pre-works, main work, and others. The most recent cases are compared and analyzed for each issue. After the analysis, following conclusions are obtained, (1) In defect lawsuit system, even though surface treatment work in pre-work step is part of main work, it has been separated and regarded as a separate work. (2) Although the main painting work are not significantly different from two systems, it is still necessary to achieve a consensus to close the gap in the methodology of painting area calculation and determining whole painting or partial painting. (3) In addition, unlike the profit rate of general construction works, that of painting work remained the maximum rate and additional charge rate for works carried out in higher place are different among cases. Therefore, it is determined that establishing consistent standards is urgent.

• 화약ㆍ발파
• /
• 제23권3호
• /
• pp.1-10
• /
• 2005

구조물의 발파진동에 대한 허용 수준 설정은 구조물의 반응 특성이 발파 진동의 특성과 전파 매질인 지반의 특성, 대상 구조물의 특성, 구조물의 기초 특성 등 여러 인파에 따라 달리 나타나므로 표준화된 기준을 적용하기는 쉽지 않은 일이다. 국외의 경우 영국, 독일, 스위스, 스웨덴과 같이 국가별로 허용수준에 대한 표준을 마련한 나라들도 있으며 아직 별도로 기준을 마련하지 않은 국가들도 많다. 우리나라는 통상 적용되고 있는 기준이 있으나 아직 국가 표준화는 되어 있지 않은 상황이며 민원 해결의 근거를 위한 합리적인 기준 마련의 필요성이 대두되고 있는 실정이다. 본 논문에서는 국가적으로 기준을 갖고 있는 미국, 영국, 독일, 스위스, 스웨덴 등의 사례와 개정 작업을 하고 있는 호주 및 브라질의 사례 분석을 통하여 다양한 형태의 기준들에 대한 특징을 파악하고 현행 사용되고 있는 국내 기준의 문제점을 고찰하였다.

• 한국주거학회논문집
• /
• 제16권3호
• /
• pp.17-26
• /
• 2005

The purpose of this study is to provide the improvement plans and the future development guidelines to improve the apartment housing remodeling. To achieve this goal, case studies and personnel interviews were conducted. Case Studies were performed on 3 apartment houses which had a remodeling association and personnel interviews were performed on the union presidents of the apartment houses. As a result of this study on the practice of apartment housing remodeling, the problems are as follows; 1) a lack of establishing the specific standards and the operation procedures in terms of the laws and regulations 2) a lack of the residents' right awareness in terms of the maintenance & administration 3) a lack of the funds raising in the case of remodeling in the small. middle size in terms of the finance. According to above results, to improve the apartment housing remodeling, it is showed to be necessary to establish the specific standards and procedures in the laws, regulations and policies, which will be accomplished by real remodeling cases.

• 전기학회논문지
• /
• 제59권9호
• /
• pp.1566-1574
• /
• 2010

This paper presents an in-depth review for current status for demand-side management (DSM) investment of energy supplier and an useful prospect on the introduction of Energy Efficiency Resource Standards (EERS). According to the Article 9 of Rational Energy Utilization Act, Energy suppliers-Korea Electric Power Corporation (KEPCO), Korea Gas Corporation (KOGAS) and Korea District Heat Corporation (KDHC) prescribed by Presidential Decree-must establish and implement annual demand-side management investment plan to improve energy efficiency in production, transformation, transportation, storage and usage of corresponding energy and to reduce demand and green house gas emissions. In this paper, we examine the DSM programs of energy suppliers and the results of DSM investment in 2009, then we propose a reasonable solution for the development of DSM investment. Furthermore, in order to compare our situation, the case studies were conducted on EERS issues in England, Italy, France and U.S, such as establishing the energy saving target, selecting the target energy supplier, and penalty and incentive mechanisms. Throughout the case studies, this paper suggests the directions to the DSM investment planning of energy suppliers and the major issues to prepare EERS in Korea.

• 한국항공운항학회지
• /
• 제25권3호
• /
• pp.115-122
• /
• 2017

To achieve designed quality and reliability from R&D to force integration, an establishment of precise and distinct specifications and standards are required. However, the recent process of R&D standardization on defense acquisition system, has brought plenty of corrections on specifications and standards that may cause not only difficulties to production line and retardation to the military forces, but also a degradation of provided weapon systems. Therefore, a technical review should be performed by the developer, the producer, and the client, establishing the standard that include mass production requirements as well as clients' requirements. This paper propose a specified solution on process of R&D standardization, by applying a substantial FCA(Functional Configuration Audit) and PCA(Physical Configuration Audit) which implies participation of related agencies. By the improved PCA, 2,023 corrections on 74 types of QAR(Quality Assurance Requirement)s and 12,715 corrections on drawings are identified.

• 한국안전학회지
• /
• 제32권4호
• /
• pp.122-128
• /
• 2017

Recently, accidents such as human accidents are increasing rapidly due to natural disasters and changes in social conditions due to abnormal weather. As a result, damage has been causing massive damage unlike the past. In the case of small and medium enterprises excluding financial institutions and big company, there is no system for prevention and restoration for stable operation from various risks such as human and natural disasters. As the current disaster continues, public and private companies have raised the need for BCM, and with the introduction of the ISO22301 certification system, the company has been establishing and operating Enterprise Disaster Management Standards in the Ministry of Public Safety and Security since 2007. However, in most SMEs, it is hard to bear the input of internal labor and investment cost, and there is a lack of personnel with expertise to conduct BCM diagnosis. Therefore, in this paper, we will study the diagnosis level of enterprise continuity plan which is commonly used in Korea and abroad. Based on this, we will study the BCM system diagnosis method which can be applied to small and medium enterprises in Korea efficiently.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.338-350
• /
• 2010

As existing materials for ground reinforcement, chemical grout material using cementitous materials and waterglass was used. But many problems in terms of ground reinforcement effects were implicated. In this study, for development and applicability verification of new materials, viscosity, fluidity, permeability, Self-Leveling, keeping of drilled hole, antiwashout underwater, resistance of water (groundwater dilution and minimize material eluting) and the early strength and long-term strength characteristics of developed materials was confirmed, and material standards, and establishing construction standards for the various model tests were conducted. As a result, high viscosity, flowability, permeability and keeping of drilled hole characteristics are excellent, in addition to the early strength properties, dilution does nat occur to groundwater, including groundwater is available for dealing with environmental issues. Application of basic and reinforcement method by Filler function in addition to structure can also or development of a new concept can be expected. In addition, middle and large-diameter drilled shaft, micropile, ground anchors, soil-nailing, steel pipes multi-grouting reinforcement for cement injection process could be used enough to even be considered.

• 한국산림과학회지
• /
• 제95권2호
• /
• pp.194-202
• /
• 2006

The purpose of this study was to provide necessary requirements on accreditation for forest culture and recreational interpretive programs in order to set up the enforcement regulations of the Forest Culture and Recreation Act. The intention of this study was to contribute to raising the qualitative standards of forest interpreters through the adoption of accreditation procedures for forest culture and recreational education programs, to establish detailed standards regarding the accreditation of forest interpreter training courses, and to provide materials and resources useful in creating forestry policies regarding forest interpreters and forest culture and recreation. This study examined five topics: 1) To establish conceptual understanding of the accreditation procedures for forest culture and recreation interpretive programs, 2) To understanding the present status of training programs and courses related to accreditation procedures for forest culture and recreation interpretive programs, and examining the status of current forest interpreter training courses, 3) To propose an operational scheme for accreditation procedures for forest culture and recreation programs, and develop the goal of an operation of the accreditation procedures for forest culture and recreation programs, 4) To propose an operational scheme for accreditation procedures for forest culture and recreational education programs, and the operational scheme for forest interpreter training courses, and 5) To establishing a commission to evaluate the accreditation procedures for forest culture and recreation programs and operating guidelines.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.147-148
• /
• 2001

The construction of reliability evaluation according to their fields was promoted under the supervision of Agency for Technology and Standards for establishing the relevant institution & infrastructure that can fundamentally solve the reliability problems, the biggest obstruction when the developed electric components & materials come into the market. This paper describes the criterion of reliability evaluation and the evaluation facilities for the purpose of heightening the reliability of composite insulator estimated as the new material among the electric components & materials. We will understand the criterion of reliability evaluation with two parts as the performance evaluation based on various kinds of standards (especially IEC) and as the long-term reliability evaluation utilizing the accelerated aging & flashover test methods. Therefore we aim for constructing the criterion of reliability evaluation as the foundation for evaluation so as to support the industrial group based on KERI facilities.

• 한국멀티미디어학회논문지
• /
• 제18권12호
• /
• pp.1547-1554
• /
• 2015

Because there are numerous near field communication (NFC) technical standards and each standard has an independent communication protocol, an NFC software for controlling the protocols are significantly complicated. Especially, the anticollision algorithm for establishing the initial communication connection is classified into bit-oriented or time slot method according to the technical standards. Moreover, the anticollision algorithm is generally manipulated in software because of its complexity. In addition, since one host processor is shared by multiple modems in a connectivity SoC, embedding several communication modems with an NFC modem, the spare computing resources can be utilized for other modems by reducing the software cost to control the NFC modem. In this paper, we propose new design methods of the NFC modem for supporting anticollision, framing and bit rate detection in the hardware to reduce the software overhead. Therefore, the utilization of the NFC technology is enhanced in the connectivity SoC by minimizing the cost of software.