• Journal of Korea Society of Digital Industry and Information Management
• /
• 제20권3호
• /
• pp.101-115
• /
• 2024

Compensation plays an important role in increasing the satisfaction of organizational members and reducing turnover. A balanced approach including competitive base salary and performance-based compensation can meet the financial and psychological needs of members, creating more dedicated and satisfied organizational members. From this perspective, this study was conducted on the impact of trainers' performance-based compensation system on customer satisfaction and turnover rate, focusing on TASTE FITNESS. TASTE FITNESS established differentiated compensation and performance-based compensation system based on performance-based compensation for each job group of counselors, managers, and trainers working within the organization, and confirmed that this led to the turnover rate of organizational members and customer satisfaction. However, a more efficient and satisfactory compensation system can be established by supplementing the stability of performance-based compensation, supporting the initial entry stage, diversifying performance-based compensation, and strengthening long-term performance-based compensation. This is an issue that should be considered not only by TASTE FITNESS but also by all similar industries.

• The KSFM Journal of Fluid Machinery
• /
• 제5권1호
• /
• pp.33-41
• /
• 2002

Low NPSH and high pressure pumps we widely used for turbopump systems, which have an inducer and operate at high rotating speeds. In this paper, a meanline method has been established for the preliminary design and performance prediction of pumps having an inducer for cavitating or non-cavitating conditions at design or off-design points. The method was applied for the performance prediction of a fuel pump. Predicted performances by the method are shown to be in good agreement with experimental results for cavitating and non-cavitating conditions. The established meanline method can be used for the performance prediction and preliminary design of high speed pumps which have a inducer, impeller and volute.

• Steel and Composite Structures
• /
• 제47권1호
• /
• pp.121-134
• /
• 2023

This paper tested 11 concrete-encased concrete-filled steel tube (CFST) composite columns and one reinforced concrete column under combined axial compression and lateral loads. The primary parameters, including the loading system, axial compression ratio, volume stirrup ratio, diameter-to-thickness ratio of the steel tube, and stirrup form, were varied. The influence of the parameters on the failure mode, strength, ductility, energy dissipation, strength degradation, and damage evolution of the composite columns were revealed. Moreover, a two-parameter nonlinear seismic damage model for composite columns was established, which can reflect the degree and development process of the seismic damage. In addition, the relationships among the inter-story drift ratio, damage index and seismic performance level of composite columns were established to provide a theoretical basis for seismic performance design and damage assessments.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• 제30권4호
• /
• pp.9-22
• /
• 2022

With the continuous increase in demand for air transport services and the growth of the air transport industry, the International Civil Aviation Organization (ICAO) and its member states are facing social demands to expand the capacity of the air transport system and improve the efficiency of its operation. ICAO developed the concept of Performance Based Navigation (PBN) for the purpose of solving problems related to the function and performance of the navigation system. Member countries established an implementation plan in accordance with the resolutionof the ICAO General Assembly, and South Korea established a Performance-Based Navigation implementation plan in December 2009. This paper evaluates the progress made so far based on Korea's Performance-Based Navigation implementation plan and proposes a development direction for Performance-Based Navigation based on changes in the international environment.

• International conference on construction engineering and project management
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.426-431
• /
• 2011

The quality of performance evaluation on engineering consultants that provide design-related technical services is difficult to be measured, and only a handful of papers discussed the quality during the design stage. Although design cost is relatively far less than construction cost for a project, the decisions made in the design phase have a significant impact on the final products of the project, especially for large public construction projects. Therefore, this research focuses on reviewing and then establishing a performance evaluation framework for the consulting firms that execute detailed design and provide technical services for the Taipei Rapid Transit Systems (TRTS). By interviewing experts, this study first established a set of indicators to evaluate these firms' performance. Then, those indicators were incorporated into the four aspects of balanced scorecard (BSC) to establish the architecture of the evaluation mechanism. The weight of each indicator was calculated by analytic hierarchy process (AHP) from a survey conducted among experts. The results showed that the top-three indicators were quantity take-off, functions conformity, and budgeting. The framework of performance evaluation established by this study can be applied to measure service performance during the design stage. It not only facilitates the monitoring of consulting firms, but also helps to reduce unnecessary change orders and disputes during the construction stage.

• Journal of Nutrition and Health
• /
• 제28권5호
• /
• pp.460-470
• /
• 1995

The purpose of this study were to examine clinical dietetic performance level and to determine factors affecting clinical dietetic performance level. The survery was carried out for the 33 general hospitals over 400 beds in Seoul We established 13 factors which amy affect clinical dietetic performance level and investigated the relationship between these factors and clinical dietetic performance level. The average score of performance and perception of importance levels of clinical dietetic practices were 46.0${\pm}$6.9 and 73.2${\pm}$4.8 respectively. None of the demographic variables were significantly correlated to clinical dietetic performance level. Clinical dietetic performance level depended upon whether dietetic department had a division or not for clinical dietetic activities.

• The KSFM Journal of Fluid Machinery
• /
• 제8권2호
• /
• pp.31-38
• /
• 2005

A low NPSH and high pressure fuel pump has been designed for a turbopump system. The fuel pump has an axial inducer and a centrifugal impeller. A meanline method has been established for the preliminary design and performance prediction of pumps at design or off-design points. KeRC(Kelyish Research Center) carried out a model testing of the fuel pump with water as a working fluid at the reduced speed. Predicted performances by the method are shown to be in good agreement with experimental results for cavitating and non-cavitating conditions. The established meanline method can be used for the performance prediction and preliminary design of high speed pumps which have a inducer, impeller and volute. In the current study, the three dimensional viscous flow in the fuel pump was investigated through numerical computation. A modified design of the fuel pump was generated to improve pump performance by utilizing CFD results. The modified fuel pump was experimentally tested by ROTEM and KARI(Korea Aerospace Research Institute). The measured non-cavitating and cavitating performance showed a good agreement with designed performance.

• International Journal of Highway Engineering
• /
• 제19권2호
• /
• pp.55-65
• /
• 2017

PURPOSES : This study aimed to analyze the experimental and numerical behavior of warm mix asphalt pavement prepared using steel slag and RAP and to conduct economic analysis of pavement construction. METHODS : For developing high performance asphalt pavement, we performed three evaluations: fundamental analysis, experimental testing, and 3D finite element analysis. In particular, 3D finite element analysis was conducted on several pavement structures by adopting the results of experimental tests. RESULTS : Through the various evaluations, it was established that steel slag was effective for use as asphalt mixture aggregate. Moreover, asphalt mixture constituting steel slag and RAP demonstrated higher performance behavior compared with conventionally used asphalt mixture. Furthermore, based on the 3D FE modeling, we established that the developed asphalt pavement constituting steel slag and RAP can be utilized for thin layer pavement with comparable performance behavior. CONCLUSIONS :Warm mix asphalt pavement prepared using steel slag and RAP is more competitive and economic compared to hot-mix asphalt pavement. Moreover, it can be applied for preparing thin layer asphalt pavements with reasonable performance. The developed warm mix asphalt pavement prepared using steel slag and RAP can be an alternative pavement type with competitive performance based on the reasonable economic benefit it provides.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.341-346
• /
• 2004

A low NPSH and high pressure fuel pump has been designed for a turbopump system. The fuel pump has an axial inducer and a centrifugal impeller. A meanline method has been established for the preliminary design and performance prediction of pumps at design or off-design points. KeRC carried out a model testing of the fuel pump with water as a working fluid at the reduced speed. Predicted performances by the method are shown to be in good agreement with experimental results for cavitating and non-cavitating conditions. The established meanline method can be used for the performance prediction and preliminary design of high speed pumps which have a inducer, impeller and volute. In the current study, the three dimensional viscous flow in the fuel pump was investigated through numerical computation. A modified design of the fuel pun was generated to improve pump performance by utilizing CFD results. The modified fuel pump was experimentally tested by ROTEM and KARI. The measured non-cavitating and cavitating performance showed a good agreement with designed performance.

• Journal of the Korea Safety Management & Science
• /
• 제17권2호
• /
• pp.183-190
• /
• 2015

For the sustainable development, companies are making a lot of efforts such as activities of sales increase and cost reduction. Among these, efforts to use limited resources efficiently and effectively is still being made steadily. And many methods for management innovation are being introduced and used. However there were partial or temporary effects only. So there are not enough to achieve operations performance to cover the entire system. Therefore, in order to maximize performance or to improve sustainability across the companies, it is necessary to rebuild the existing system with process perspective not with existing functional perspective. This study was performed to achieve the objective that is operation performance improvement of certification body. So literature review was researched and analyed about the process innovation and the process approach. And basic model which is compatible with ISO/IEC 17021 requirement for the certification body was established in this study. Based on this model, one of the certification body was selected and operation system for this organization was established, documented and implemented through the process approach method. In the result, operations performance of certification body on the side of efficiency and effectiveness is analyzed and the effect of reconstruction of system on operations performance was figured out