• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.10
• /
• pp.971-981
• /
• 2002

An open-ended coaxial probe method has been considered as one of effective tools for measuring electrical properties of its contacted material without shaping and fitting. The measured reflection coefficient at the probe's end is able to convert into the corresponding complex permittivity by employing the improved version of virtual transmission-line model Presented by our lab already. But the error of complex permittivity converted by equivalent model increases as the operating frequency ascends high. The errors of complex permittivity in the open-ended coaxial probe can be yielded compositively by the imperfect contact or probe, manufacture error of probe and complex permittivity error of reference material etc. Therefore it is necessary to limit the problem to identify the error causes in high frequency. In this paper, the errors which are resulted from the measurement of reflection coefficient are removed by using the FDTD(Finite-Difference Time-Domain) method, the error causes are limited the conversion model problem. And the error study of the improved conversion model is performed from several viewpoints. At first, the local minimum of parameter to be calculated by the iteration method in the conversion model is checked. At second, the modeling of the equivalent model is checked in the frequency range. From this study, we know the valid range of the improved conversion model.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.2
• /
• pp.167-177
• /
• 2002

In Strapdown Inertial Navigation System(SDINS), error models based on previously proposed conversion equations between the attitude errors, are only valid in case the attitude errors are small. The SDINS error models have been independently studied according to the definition of the reference frame and of the attitude error. The conversion equations between the attitude errors applicable to SDINS with large attitude errors are newly derived. Lyapunov transformation matrices are also derived from the obtained results. Furthermore the general method, which is independent of the attitude error and the reference frame to derive SDINS error model, is proposed using the Lyapunov transformation.

• Journal of Korea Multimedia Society
• /
• v.25 no.10
• /
• pp.1448-1456
• /
• 2022

This paper studies a model to diagnose efficiency reduction of inverter using Multilayer Perceptron(MLP). In this study, two inverter data which started operation at different day was used. A Multilayer Perceptron model was made to predict photovoltaic power data of the latest inverter. As a result of the model's performance test, the Mean Absolute Percentage Error(MAPE) was 4.1034. The verified model was applied to one-year-old and two-year-old data after old inverter starting operation. The predictive power of one-year-old inverter was larger than the observed power by 724.9243 on average. And two-year-old inverter's predictive value was larger than the observed power by 836.4616 on average. The prediction error of two-year-old inverter rose 111.5572 on a year. This error is 0.4% of the total capacity. It was proved that the error is meaningful difference by t-test. The error is predicted value minus actual value. Which means that PV system actually generated less than prediction. Therefore, increasing error is decreasing conversion efficiency of inverter. Finally, conversion efficiency of the inverter decreased by 0.4% over a year using this model.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.53.3-53
• /
• 2002

1. Introdition : The necessity of DGPS data compensation. 2. Configuration of the GPS and coordinates conversion 2-1. Coordinates conversion of CCD 3. Vehicle Model and Evaluation 4. Accurate error position algorithm. 5. Experiment and result. 6. Conclusion: It was possible that we converted the CCD data into the GPS coordinates data.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.5
• /
• pp.401-406
• /
• 2002

As product lifecycles become shorter, factories are pushed to develop small batches of many different products. The highly flexible control systems has become a necessity. The majority of existing automated industrial systems are controlled by programmable logic controllers(PLCs). In most cases, the control programs for PLCs are developed based on ladder diagrams(LDs). However, it is difficult to debug and maintain those LDs because the synthesis of LD itself mainly depends on the experience of the industrial engineer via trial-and-error methods. Hence, in this paper, we propose a discrete event model conversion algorithm for systematic analysis of LDs. The proposed discrete event model conversion algorithm is illustrated by an example of a conveyor system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.493-498
• /
• 2004

The complex permittivities of methanol measured from 0.2 to 2.0 ㎓ using an open-ended coaxial probe revealed the large deviation from the given data in literature. In this paper, it was investigated whether the given or measured complex permittivity is similar to the real value of our methanol used for experiment. The FDTD method was applied to confirm the effect of our conversion model excluding the effect of sufficiently small measurement error. The complex permittivities reconverted from the computed reflection coefficient by employing our improved conversion model were not similar to the given value but measured value. These results assured the accuracy and stability of our measurement-and-conversion process.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.10
• /
• pp.1317-1326
• /
• 1999

As the integration ratio and operation speed increase, it has become an important problem to estimate the dissipated power during the design procedure as a method to reduce the TTM(time to market). This paper proposed a prediction model to estimate the maximum dissipated power of a CMOS logic gate. This model uses a calculational method. It was formed by including the characteristics of MOSFETs of which a CMOS gate consists, the operational characteristics of the gate, and the characteristics of the input signals. As the modeling process, a maximum power estimation model for CMOS inverter was formed first, and then a conversion model to convert a multiple input CMOS gate into a corresponding CMOS inverter was proposed. Finally, the power model for inverter was applied to the converted result so that the model could be applied to a general CMOS gate. For experiment, several CMOS gates were designed in layout level by $0.6{\mu}m$ layout design rule. The result by comparing the calculated results with those from HSPICE simulations for the gates showed that the gate conversion model has within 5% of the relative error rate to the SPICE and the maximum power estimation model has within 10% of the relative error rate. Thus, the proposed models have sufficient accuracies. Also in calculation time, the proposed models was more than 30 times faster than SPICE simulation. Consequently, it can be said that the proposed model could be used efficiently to estimate the maximum dissipated power of a CMOS logic gate during the design procedure.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.1
• /
• pp.23-28
• /
• 2005

This paper investigates the effects of disk thickness and Pemto slider on PES(position error signal) for high TPI(track per inch) drives above 150kTPI at early stage of their development. In order to reduce the disk flutter which becomes a dominant contributor to the TMR, the thicker disks with both 63 and 69mi1 have been used. Also, PES of a Pemto slider with thinner thickness than Pico slider has been estimated to decrease the conversion factor of disk motion in axial direction to head off-track motion. A frequency-domain PES estimation and prediction tool has been developed via measurement of disk flutter and HSA(head stack assembly) forced vibration. It has been validated by the measured PES in drive level. Based on the model and measurement of disk flutter, PES of a drive with the thicker disk and Pemto slider is predicted and their impact is investigated.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.5
• /
• pp.322-331
• /
• 2003

Advances of high-definition television(HDTV) and personal computers call for the mutual conversion between interlaced signal and progressive signal. Especially, deinterlacing which is known as an interlaced to progressive conversion has been recently required and investigated. In this paper, we propose new deinterlacing algorithm considering sub-pixel motion information. In order to reduce the error of motion estimation, we analyze the effect of inaccurate sub-pixel motion information and model it as zero-mean Gaussian noises added respectively to each low resolution image(field). The error caused by inaccurate motion information is reduced by determining regularization parameter according to the error of motion estimation in each channel. The validity of the proposed algorithm is demonstrated both theoretically and experimentally in this paper.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.4
• /
• pp.509-518
• /
• 1993

Protocol conversion is to resolve the imcompatibility between networks so that users on different protocols can communicate with each other. This paper designs a formal model, EPN , to increase its modeling power and analyze conversion protocol and proposes a conversion algorithm using it. The conversion algorithm has two capabilities : synchronization and automatic error recovery function. Therefore burden of protocol converter design will be reduced, automatic protocol converter design can be possible and implementation for half-gateway will be easy.