• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1613-1621
• /
• 2015

This paper analyzes the rate adaptation scheme and suggests applicable strategy of the MCS(Modulation and Coding Scheme) for improving DCF throughput in the IEEE 802.11ad and 802.11ad wireless LAN. IEEE 802.11ac and 802.11ad wireless LAN provide MCS technique that dynamically adjusts modulation level and code rate to the time-varying channel conditions in order to obtain considerably high data rates. But these standards did not provide rate adaptation algorithm, so this paper surveyes rate adaptation algorithm and suggests MCS scheme applied to IEEE 802.11ac and 802.11ad wireless LAN. Specially A MAC(Medium Access Control) layer throughput is evaluated over error-prone channel in the IEEE 802.11ac-based wireless LAN. In this evaluation, DCF (Distributed Coordination Function) protocol and A-MPDU (MAC Protocol Data Unit Aggregation) scheme are used. Using theoretical analysis method, the MAC saturation throughput is evaluated with the PER (Packet Error Rate) on the condition that the number of station, transmission probability, the number of parallel beams and the number of frames in each A-MPDU are variables.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.4
• /
• pp.228-233
• /
• 1998

This study presents a close-range photogrammetry that is applicable to beach profile estimation using a non-metric camera. Based on the analysis of oblique video image in which the video camera was installed on a horizontal plane and the field of view was fixed, a new equation to analyze a photograph was developed considering the following aspects: (1) camera is allowed to be rotated about its optical axis and (2) a simple error model is adopted to correct lens distortion and other systematic errors associated with the non-metric camera, which improves accuracy of non-metric imageries. To test the modified technique, photographs of the beach were taken near the Donghae City in February, 1998. In addition, beach profiles were surveyed with conventional dumpy level and surveying staff. RMS error between the estimated and measured beach profiles is less than 10 cm in elevation.

• Journal of Korean Society on Water Environment
• /
• v.34 no.3
• /
• pp.270-284
• /
• 2018

Paldang is a river reservoir located in the Midwest of Korea, with a water volume of $244{\cdot}10^6m^3$ and a water surface area of $36.5km^2$. It has eutrophied since the construction of a dam at the end of 1973, and the phosphorus concentration has decreased since 2001. Average hydraulic residence time of the Paldang reservoir is about 10 days during the spring season and 5.6 days as an annual level. The hydraulics and water quality of the reservoir can differ greatly, both temporally and spatially. For the spring period (March to May) in 2001 ~ 2017, the reservoir mean total phosphorus concentration calculated from the budget model based on a plug-flow system (PF) and a continuous stirred-tank reaction system (CSTR) was 13 % higher and 10 % lower than the observed concentration, respectively. A composite flow system (CF) was devised by assuming that the transition zone was plug flow, and that the lacustrine zone was completely mixed. The mean concentration calculated from the model based on CF was not skewed from the observed concentration, and showed just 6 % error. The retention coefficient of the phosphorus derived from the CF was 0.30, which was less than those of the natural lakes abroad or river reservoirs in Korea. The apparent settling velocity of total phosphorus was estimated to be $93m\;yr^{-1}$, which was 6 ~ 9 times higher than those of foreign natural lakes. Assuming CF, the critical load line for the total phosphorus concentration showed a hyperbolic relation to the hydraulic load in the Paldang reservoir. This is different from the previously known straight critical load line. The trophic state of the Paldang reservoir has recently been estimated to be mesotrophic based on the critical-load curve of the phosphorus budget model developed in this study. Although there is no theoretical error in the newly developed budget model, it is necessary to verify the validity of the portion below the inflection point of the critical-load curve afterwards.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.9 no.2
• /
• pp.37-48
• /
• 1991

In this study, conventional network adjustment and combined network adjustment methods for single network adjustment methods for single network and centric combination network were compared by the analysis of root mean square error and standard error ellipse of observed points. It can be concluded from this study that for conventional surveying methods, the accuracy is in theorder of trilateration, traverse and triangulation, and for the case of combined surveying method, the accuracy is in the order of multilateration surveying, combined traverse and combined triangulation-trilateration surveying. And when establishing new control points, the accuracy can be improved by increasing redundant observations of centric combination network instead of using the single network. Also, in case of combined traverse surveying by adding observable laterals, accuracy level of trilateration could be achieved, and it was found that traverse is effective for large areas where sighting is easy, and combined traverse surveying is effective for urban areas where sighting is difficult.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.3
• /
• pp.244-249
• /
• 2010

The design of error correction code with low complexity has a good attraction for next generation multi-level cell flash memory. Sharing sub-expressions is effective method to reduce complexity and chip size. This paper proposes a new design method of m-bit parallel BCH encoder based on serial linear feedback shift register structure with low complexity using sub-expression. In addition, general algorithm for obtaining the sub-expression is introduced. The sub-expression can be expressed by matrix operation between sub-matrix of generator matrix and sum of two different variables. The number of the sub-expression is restricted by. The obtained sub-expressions can be shared for implementation of different m-parallel BCH encoder. This paper is not focused on solving a problem (delay) induced by numerous fan-out, but complexity reduction, expecially the number of gates.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5C
• /
• pp.398-405
• /
• 2005

The multiuser detection (MUD) based wireless receiver requires more accurate channel estimation than the single user detection (SUD) schemes such as Rake receiver, and hence the post processing is required for MUD to clean up the estimated channel coefficients by eliminating the noise only coefficients. The adaptive post processing method is proposed in order to provide more accurate channel responses and the power level of the background noise and interferences at the cost of the negligible processing delay compared to the conventional method based on the threshold test with the threshold value relative to the noise variance. The simulations are performed in 3GPP-TDD mode environment. The results show that the noise estimation error of the proposed method is maximum $10\%$, which is much smaller than $50\%$ maximum error of the conventional method.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.735-748
• /
• 2016

Since the number of student is regarded as the fundamental basis to calculate the future allocation of employed teachers, it needs to be systematically estimated based on statistical data. In order to achieve this purpose, the number of high school students is projected following the assumption that the teacher-student ratio of Korea should be adjusted to the level of OECD to improve the quality of education. Hence, this paper introduced the projection methods by time series model. To predict the number of high school students and error estimation, various models were adopted.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.6
• /
• pp.55-62
• /
• 2005

It is essential for a fuzzy logic controller to have an appropriate set of rules to perform at the desired level. The linguistic structure of the fuzzy logic controller allows a tentative linguistic policy to be used as an initial rule base. At the design stage, if one can reasonably assemble a good collection of rules, it may then be possible to be tuned to improve the controller performance. In this paper, we proposed the shifting method of rule base table to improve the performance of fuzzy controller. The proposed method is based on the principle of that the effect of the output to regulate the system would be greater when the error increases and the effect of output would be less when the error decreases. According to simulation results, it is an effective method to improve the fuzzy control rule base and the performance of fuzzy logic controllers.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.7
• /
• pp.12-22
• /
• 2012

The main drawback of the multi-code spread spectrum communication system, which spreads data bits stream by the multiplexed orthogonal codes, is the need for the highly linear amplifier. Several constant amplitude precoding schemes have been proposed for the Walsh code or the extended $m$-sequence based multi-code spread spectrum systems. In the constant amplitude spread spectrum systems the accompany code is transmitted together with orthogonal codes to maintain the transmitter output in a constant level. In this paper we propose the use of the accompany in the receiver to improve the BER performance. The proposed receiver has the capability to correct the code detection error(up to one code error). We carried out simulations to verify the validity of the proposed algorithm. BER performance improvement was noticed compared with the conventional receiver.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.5
• /
• pp.478-491
• /
• 1987

In this paper, an all Digital Phase-Locked Loop(DPLL) has been propoed, which has reduced the phase error by using a half period sampling in order to improve the performance of the conventional DPLL which tracks the phase of incoming sinusoidal signal once per cycle for the Positive Going Zero crossing(PGZC) of the signal. The proposed DPLL tracks the phase of input signal twice per cycle with two samplers for the PGZC. So the loop has a half reduction of the steady state phase error fluctuation ranges without decreasing the lock-range in a whole, comparing with that of the conventional DPLL. Also, it has been known that the proposed loop is rapidly locked to input signal for the same valves of phase differenc between sucessive samples and quantization level. The analytic results of the proposed loop have been verified by computer simulation for the practically requeired conditions.