• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.387-390
• /
• 2000

This paper proposes an efficient and accurate power estimation method for Application Specific Instruction set Processors (ASIPs). Proposed method takes advantage of the data types of variables in application program to be executed on the ASIP. According to the experimental results, the efficiency of proposed method was more than 1000 times as high as that of conventional RTL based power estimation method, and the estimation error was within 10% compared to a conventional gate-level accurate power estimation method

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.113-116
• /
• 2000

Phase noise of oscillator gives the performance degradation significantly when a high carrier frequency and low transmission rate are used. The BER(Bit Error Rates) degradation of QPSK(Quadrature Phase Shift Keying) transmission is analyzed with the oscillator phase noise level specified in downstream physical interface of LMDS(Local Multipoint Distribution Services) which is described in DAVIC(Digital Audio Visual Council). The model used for the phase noise is a power-law model. We also investigated the effects of the various transmission rates on system performance. For the transmission rate below 0.5 Mbps, the BER performance is severely degraded and we verified that the transmission rate, 20 Mbps, is adequate for the downstream of LMDS systems.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.521-522
• /
• 2006

This paper presents behavioral models using SIMULINK and Verilog-a for a PLL based fractional-N frequency synthesizer. The SIMULINK modeling was built in the frequency-time mixed domain whereas the Verilog-a modeling was built purely in the time domain. The simulated results of the two models were verified to show the same performance within the error tolerance. This top-down design method can provide the readiness for the transistor-level design.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1722-1730
• /
• 2007

According to the result of recent studies, it was revealed that the error of safety-related personnel still plays a significant role in the accidents and/or incidents of a railway system. Accordingly, in order to reduce as well as prevent human errors, it is necessary to: (1) identify the root cause of accidents/incidents, and (2) conduct a research that can provide a systematic as well as an effective way to deal with the identified human errors. To this end, it is essential to suggest appropriate countermeasures based on the result of a task load analysis, which can soundly reduce a high level of the task load put on safety-related personnel. In the light of this concern, about the tasks of railway traffic signallers, a detailed task analysis was conducted in this study. After that, the associated task load scores were quantified by NASA-TLX technique that is one of the most well-known subjective workload measurement techniques. As a result, a set of significant tasks that could put a high task load on railway traffic signallers was identified.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10b
• /
• pp.761-766
• /
• 1998

GPR(Ground Penetrating Radar) designed with a digital-based signal processing technology utilizes to identify very easily the location, the thickness and the level of either an underground embedment or an underground structure. Prior to use of this GPR equipment on pavement of about 15cm thick, the equipment should foremost be calibrated on a known sample under known condition. The purpose of this study is to verify the applicability of the GPR equipment to a model pavement of about 15cm thick. As part of this effort, the general approach of this study is to verify the applicability of the GPR equipment by various thickness levels and its error ranges thru a statistical analysis.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.73-76
• /
• 2005

This study aims to suggest a simple and convenient design for a mix proportion method for high performance concrete by determining the optimum fine aggregate ratio and minimum binder content based on the maximum density theory. The mix design method introduced in this study adopted the optimum fine aggregate ratio with a minimum void and binder content higher than the minimum binder content level. The research results reveal that the method helps to reduce trial and error in the mixing process and is a convenient way of producing high performance concrete with self filler ability. In an experiment based on the mix proportion method, when aggregate with the fine aggregation ratio of 41$\%$ was used, the minimum binder content of high performance concrete was 470kg/$m^{3}$ and maximum aggregate capacity was $0.657m^{3}/m^{3}$. In addition, in mixing high performance concrete, the optimal slump flow to meet filler ability was 65$\pm$5cm, V load flow speed ranged from 0.5 to 1.5.

• Survey Research
• /
• v.1 no.1
• /
• pp.109-123
• /
• 2000

In order to make statistically valid inferences for survey data based on complex probability sample designs, survey researchers must incorporate the sample design in the data analysis If this in not the case the variance estimates of survey statistics derived under the usual simple random sampling assumptions from an infinite population generally underestimate the true variance, which results in high Type l error level. In this article we introduce new software packages dedicated to analyze complex survey data In particular, we summarize analysis capabilities on SUDAAN Version 7.5 and SAS Version 8.

• Tuberculosis and Respiratory Diseases
• /
• v.40 no.4
• /
• pp.353-356
• /
• 1993

Advent of new imaging modalities such as computed tomography, magnetic resonance imaging and ultrasound contributed greately to the specific imaging diagnosis. However plain chest X-ray is still most prequently used for imaging diagnosis of respiratory disease in clinical pratic and it is important to make a good quality of X-ray film and good interpretation. The optimal chest X-ray should be taken with full inspiration without rotation and motion and the exposure is at the level of barely demonstrable thoracic vertebral disc space. It is recommended that higk KVP technique for detection of lesions which is overlaped by mediastinum, heart and rib cage. It is better to examine chest X-ray film start at some distance(6-8 feet) and closer to the film later on and the reader should not read a film in fatigue condition. The reading room should be quiet and relately dark illumination. It is important, to make a good X-ray film and good interpretation to reduce the observer error.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.217-221
• /
• 2002

In this paper, we propose a new scheme of motion tracking based on fuzzy inference (FI)and wavelet transform (WT) from image sequences. First, we present a WT to segment a feature extraction of dynamic image . The coefficient matrix for 2-level DWT tent to be clustered around the location of important features in the images, such as edge discontinuities, peaks, and corners. But these features are time varying owing to the environment conditions. Second, to reduce the spatio-temporal error, We develop a fuzzy inference algorithm. Some experiments are peformed to testify the validity and applicability of the proposed system. As a result, proposed method is relatively simple compared with the traditional space domain method. It is also well suited for motion tracking under the conditions of variation of illumination.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.809-811
• /
• 2015

In this paper, for the purpose of providing high data rate services, the multi-hop frame structure is designed for the underwater acoustic (UWA) short-range system which is proposed as a part of ocean surveillance and tracking network (OSTN). Under the measured underwater channel environment, the link-level system performance are also evaluated. Simulation results show not only the packet error rate (PER) comparisons, but the optimal modulation and coding scheme (MCS) levels for the orthogonal frequency division multiplexing (OFDM) based short-range UWA communications network.