• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.993-997
• /
• 2004

A data error inspection algorithm for wireless digital data communication was developed. Original data converted By wireless digital data error inspection algorithm. Wireless digital data is high possibility to get distortion and lose by noise and barrier on wireless. If the data check damaged and lost at receiver, can't make it clear and can't judge whether this data is right or not. Therefore, by wireless transmission data need the data error inspection algorithm in order to decrease the data distortion and lose and to monitoring the transmission data as real time. This study consists of RF station for wireless transmission, Water Level Meter station for water level measurement and Error inspection algorithm for error check of transmission data. This study is also that investigation and search for error inspection algorithm in order to wireless digital data transmission in condition of the least data's damage and lose. Designed transmitter and receiver with one - chip micro process to protect to swell the volume of circuit. Had designed RF transmitter - receiver station simply by means of ATMEL one - chip micro processing the systems. Used 10mW of the best RF power and 448MHz-449MHz on frequency band which is open to public touse free within the limited power.

• 한국철도학회논문집
• /
• 제7권4호
• /
• pp.296-301
• /
• 2004

This paper addresses an analysis for a railway data transmission protocol-Ethernet based data transmission between the CTC(Centralized Traffic Control System) and the SCADA(Supervisory Control and Data Acquisition) system. Fame error rates of the data transmissions are calculated and compared for the two cases that the CTC/SCADA has an extra data transmission error control(CRCI6) besides the inherent error control of the Ethernet(CRC32), and that the CTC/SCADA has no extra data transmission error control. With simulation results it has been verified that the extra data transmission error control(CRC16) contributes to lowering the frame error rate.

• 수산해양교육연구
• /
• 제28권6호
• /
• pp.1812-1821
• /
• 2016

The purpose of this study is to survey input data error of ship automatic identification system (AIS) and suggest its improvement. The effects of AIS were observed. Input data error of AIS was investigated by dividing it into dynamic data, static data by targeting actual ships and its improvement method was suggested. The findings are as follows. Looking into accidents before and after AIS is enforced to install on the ship, total collision were decreased after AIS installed. Static data error of AIS took place mainly in the case that ship name, call sign, MMSI, IMO number, ship type, location of antenna (ship length and width) were wrongly input or those data were not input initially. Dynamic data error of AIS was represented by input error of ship's heading. As errors of voyage related data take place as well, confusion is made in sailing or ship condition. Counter measures against the above are as follows. First, reliability of AIS data information should be improved. Second, incessant concern and management should be made on the navigation officers.

• 한국콘텐츠학회논문지
• /
• 제8권10호
• /
• pp.37-44
• /
• 2008

논문은 암호문 송신 중 전송 오류에 의한 암복호화의 문제에 대한 해결책을 제시 한다. 블록 암호 알고리즘은 산사태(avalanche) 효과로 인해 단일 비트 오류에 대해서도 많은 비트에 오류를 발생시킨다. 이를 해결하기 위해 재배열 과정과 간단한 오류 정정 코드를 이용해서 산사태(avalanche) 효과에 강인한 방안을 제안한다. 재배열 과정은 간단한 오류 정정 코드를 사용하기 위한 것이다. 재배열 과정은 한 프레임 내에서 전송의 기본 단위인 n-비트 블록 내에 1비트의 단일 오류만이 존재 할 수 있도록 오류를 여러 단위에 분산시키는 역할을 하게 된다. 즉, n-비트 내에서 단일 오류만이 존재하게 되어 단일 오류 정정 코드로 쉽게 복원이 가능하게 된다. 이 방식은 보다 큰 데이터 단위에 확장하여 사용 될 수 있다.

• 한국CDE학회논문집
• /
• 제17권4호
• /
• pp.282-293
• /
• 2012

This paper presents an error-bounded B-spline fitting technique to approximate unorganized data within a prescribed error tolerance. The proposed approach includes two main steps: leastsquares minimization and error-bounded approximation. A B-spline hypervolume is first described as a data representation model, which includes its mathematical definition and the data structure for implementation. Then we present the least-squares minimization technique for the generation of an approximate B-spline model from the given data set, which provides a unique solution to the problem: overdetermined, underdetermined, or ill-conditioned problem. We also explain an algorithm for the error-bounded approximation which recursively refines the initial base model obtained from the least-squares minimization until the Euclidean distance between the model and the given data is within the given error tolerance. The proposed approach is demonstrated with some examples to show its usefulness and a good possibility for various applications.

• 한국측량학회지
• /
• 제28권1호
• /
• pp.39-46
• /
• 2010

수심측량 자료는 선박의 항행안전을 위한 필수자료이며 해양의 합리적 이용과 보전을 위한 기초자료이다. 최근 IT기술과 측위장비(GPS와 INS), 수심관측 장비(Echo Sounder)의 발달로 멀티빔(Multi Beam Echo Sounder) 방식을 이용하여 정밀한 해저지형 자료DB를 구축하고 있다. MBES 자료에는 다양한 요인으로 인하여 오차를 포함하고 있으며, 일부 자료에서 지형이 지그재그한 물결현상을 발생하는 오차들이 발생한다. 물결무늬를 발생시키는 오차는 MBES 자료 처리결과의 정확도를 저해하는 요인이며, 발생 원인을 파악하여 이러한 오측자료 제거를 통하여 정확도를 향상시키고자 한다. 본 연구에서는 MBES 자료를 이용하여 물결 무늬 현상이 발생하는 자료에 대한 Motion sensor 값을 분석하여 오측자료의 원인을 파악하였다 분석결과, 물결무늬 현상은 Roll의 표준편차와 상관관계를 갖으며, 이러한 물결무늬 오측자료는 급격한 Roll 값의 변화로 인하여 Swath 자료와 Roll 값의 불일치 결과로 나타났다. 이를 근거로 Swath 자료의 기울기와 Roll 값의 비교하여 오측자료를 선별하여 제거하였다 오측자료를 제거한 결과. Motion sensor의 Roll 값의 표준연차 등을 이용하여 MBES 자료의 품질을 판단하고, 불일치 자료를 최소화하는 추가적인 오차 요인을 계산할 수 있을 것이라 예상된다 또한, 해황조건이 고르지 못한 상황 및 Sensor의 움직임이 크게 일어나는 소형 선박 등에 척용을 하면 수심측량 정확도 개선에 기여할 수 있을 것이다.

• 대기
• /
• 제32권4호
• /
• pp.263-276
• /
• 2022

The observation error of satellite radiation data that assimilated into the Korean Integrated Model (KIM) was diagnosed by applying the Hollingsworth and Lönnberg and Desrozier techniques commonly used. The magnitude and correlation of the observation error, and the degree of contribution for the satellite radiance data were calculated. The observation errors of the similar device, such as Advanced Technology Microwave Sounder (ATMS) and Advanced Microwave Sounding Unit-A shows different characteristics. The model resolution accounts for only 1% of the observation error, and seasonal variation is not significant factor, either. The observation error used in the KIM is amplified by 3-8 times compared to the diagnosed value or standard deviation of first-guess departures. The new inflation value was calculated based on the correlation between channels and the ratio of background error and observation error. As a result of performing the model sensitivity evaluation by applying the newly inflated observation error of ATMS, the error of temperature and water vapor analysis field were decreased. And temperature and water vapor forecast field have been significantly improved, so the accuracy of precipitation prediction has also been increased by 1.7% on average in Asia especially.

• 한국기계가공학회지
• /
• 제5권3호
• /
• pp.80-85
• /
• 2006

In an effort to reduce the evaluation time of the precision of manufactured disk cams, an effective measuring method with an exclusively built profile-measuring machine and subsequent data analysis procedure is proposed. The design and measuring data are interpolated by cubic spline curves to compute the precision error which is defined by the maximum and minimum distances between two curves. The minimum zone criterion of ISO is employed to evaluate the form error, and genetic algorithm is used to search the orientation and location of design data for the measured data which minimizes the form error. The proposed system was applied to marine engine cams, and it shows that the form error is reduced to 30% down compared with the method which minimizes the form error with the assumption that the centers of measured data design cam curve are identical.

• 통합자연과학논문집
• /
• 제5권3호
• /
• pp.157-162
• /
• 2012

Measurement error is one of main source of error in survey. It is generally defined as the difference between an observed value and an underlying true value. An observed value with error may be expressed as a function of the true value plus error term. In some cases, the measurement error variance may be also a function of the unknown true value. The error variance function can be rewritten as a function of true value multiplied by a scale factor. This research explore methods for estimation of the measurement error variance based on the data from complex sampling design. We consider the case in which the variance of mesurement error is a linear function of unknown true value, and the error variance scale factor is small. We applied our results to the U.S. Third National Health and Nutrition Examination Survey (the U.S. NHANES III) data for empirical analyses, which has replicate measurements for relatively small subset of initial respondents's group.

• Journal of the Korean Data and Information Science Society
• /
• 제19권1호
• /
• pp.25-36
• /
• 2008

Error Correcting Output Codes (ECOC) can improve generalization performance when applied to multicategory classification problem. In this study we propose a new criterion to select hyperparameters included in ECOC scheme. Instead of margins of a data we propose to use the probability of misclassification error since it makes the criterion simple. Using this we obtain an upper bound of leave-one-out error of OVA(one vs all) method. Our experiments from real and synthetic data indicate that the bound leads to good estimates of parameters.