• ETRI Journal
• /
• v.30 no.2
• /
• pp.261-267
• /
• 2008

In this paper, we propose and demonstrate a cost-effective technique to upgrade the capacity of dense wavelength division multiplexing (DWDM) networks to a 40 Gb/s line rate using the existing 10 Gb/s-based infrastructure. To accommodate 40 Gb/s over the link optimized for 10 Gb/s, we propose applying a combination of super-FEC, carrier-suppressed return-to-zero, and pre-emphasis to the 40 Gb/s transponder. The transmission of 40 Gb/s DWDM channels over existing 10 Gb/s line-rate long-haul DWDM links, including $40{\times}40$ Gb/s transmission over KT's standard single-mode fiber optimized for 10 Gb/s achieves successful results. The proposed upgrading technique allows the Q-value margin for a 40 Gb/s line rate to be compatible with that of 10 Gb/s.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.748-751
• /
• 2006

Positioning accuracy by the Global Positioning System (GPS) is of great concern in a variety of research tasks. It is limited due to error sources such as ionospheric effect, orbital uncertainty, antenna phase center variation, signal multipath, and tropospheric influence. In this study, the tropospheric influence, primarily due to water vapour inhomogeneity, on GPS positioning height is investigated. The data collected by the GPS receivers along with co-located surface meteorological instruments in 2003 are utilized. The GPS receivers are established as continuously operating reference stations by the Ministry of the Interior (MOI), Central Weather Bureau (CWB), and Industrial Technology Research Institute (ITRI) of Taiwan, and International GNSS Service (IGS). The total number of GPS receivers is 21. The surface meteorological measurements include temperature, pressure, and humidity. They are introduced to GPS data processing with 24 troposphere parameters for the station heights, which are compared with those obtained without a priori knowledge of surface meteorological measurements. The results suggest that surface meteorological measurements have an expected impact on the GPS height. The daily correction maximum with the meteorological effect may be as large as 9.3 mm for the cases of concern.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.5 s.37
• /
• pp.103-108
• /
• 2005

In this Paper, we proposed a novel robust watermarking technique using PIM and 2D barcode for the copyright of the digital images. Because human is impervious to the change in the complex area, the embedding watermark to the selected coefficients using PIM enhances invisibility. A 2D barcode image is used for watermark in this research. The 2D barcode contains more information than conventional ID barcode and includes the error correction algorithm. Therefore the watermarking algorithm using 2D barcode enhances the robustness of watermark. From the experimental results , the proposed algorithm shows better invisibility and robustness performance in a general signal Processing such as JPEG and SPIHT lossy compression.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.4
• /
• pp.362-369
• /
• 2011

In this paper, vSLAM aided integrated navigation system is implemented and performance analysis of the system is completed via flight test. The system can suppress divergence of position error of INS only system by updating vSLAM correction information when temporary GPS signal outage occurs in bad radio condition. In the flight test, integrated hardware containing GPS, IMU and camera is loaded under RC electric helicopter. Performance of the integrated navigation system is verified by comparing estimated position of INS/vSLAM system with that of INS only system.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.7
• /
• pp.63-74
• /
• 2017

Recently in the area of ICT, the M2M and IoT are in the spotlight as a cutting edge technology with the help of advancement of internet. Among those fields, the smart home is the closest area to our daily lives. Smart home has the purpose to lead a user more convenient living in the house with WLAN (Wireless Local Area Network) or other short-range communication environments using automated appliances. With an arrival of the age of IoT, this can be described as one axis of a variety of applications as for the M2H (Machine to Home) field in M2M. In this paper, we propose a novel technique for estimating the location of a terminal that freely move within a specified area using the RSSI (Received Signal Strength Indication) in the WLAN environment. In order to perform the location estimation, the Fingerprint and KNN methods are utilized and the LMS with the gradient descent method and the proposed algorithm are also used through the error correction functions for locating the real-time position of a moving user who is keeping a smart terminal. From the estimated location, the nearest fixed devices which are general electric appliances were supposed to work appropriately for self-operating of virtual smart home. Through the experiments, connection and operation success rate, and the performance results are analyzed, presenting the verification results.

• Journal of Satellite, Information and Communications
• /
• v.2 no.1
• /
• pp.48-55
• /
• 2007

The system requirement definition, system configuration, major parameters for GNSS ground station development are presented in this paper. GNSS ground station system consists of the GNSS sensor station, up link station and monitoring & control system. The GNSS sensor station consists of navigation receiver subsystem which process the GPS and Galileo navigation signal, automic clock subsystem, meteorological data receiving subsystem and navigation data processing subsystem. To communicate the error correction of navigation fate, GNSS sensor station interface with GNSS Control Center.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.319-323
• /
• 2003

In this paper, we propose a hybrid transceiver for underwater acoustic communication, which allows the system to reduce complexity and increase robustness in time variant underwater channel environments. It is designed in the digital domain except for amplifiers and implemented by using a multiple digital signal processors (DSPs) system. The digital modulation technique is quadrature phase shift keying (QPSK) and frame synchronization is an energy (non-coherent) detection scheme based on the quadrature receiver structure. DSP implementation is based on block data parallel architecture (BDPA). We shaw experimental results in th? underwater anechoic basin at KRISO. The results indicate that the frame synchronization is performed without PLL. Also, we shaw that the adaptive equalizer can compensate frame synchronization error and the correction capability is dependent on the length of equalizer.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.4
• /
• pp.490-500
• /
• 1996

The conventional method to deal with current transformer (CT) Saturation is over dimensioning of the core so that CTs can carry up to 20 times the rated current without exceeding 10% ratio correction. However, this not only reduces the sensitivity of relays as some errors may still be present in the secondary current when a severe fault occurs, but also increases the CT size. This paper presents an algorithm for compensating the distorted secondary current of iron-cored CTs under CT saturation using the magnetization (flux-current : .lambda.-i) curve and its performance is examined for fault currents encountered on a typical 345[kV] Korean transmission system, under a variety of different system and fault conditions. In addition, the results of hardware implementation of the algorithm using a TMS320C10 digital signal processor are also presented. The proposed algorithm can improve the sensitivity of relays to low level internal faults, maximize the stability of relays for external faults, and reduce the required CT core cross-section significantly. (author). refs., figs.

• Korean Journal of Remote Sensing
• /
• v.32 no.1
• /
• pp.67-71
• /
• 2016

The surface reflectance is essential to retrieval various indicators related land properties such as vegetation index, albedo and etc. In this study, we estimated surface reflectance using Himawari-8 / Advanced Himawari Imager (AHI) channel data. In order to estimate surface reflectance from Top of Atmosphere (TOA) reflectance, the atmospheric correction is necessary because all of the TOA reflectance from optical sensor is affected by gas molecules and aerosol in the atmosphere. We used Second Simulation of a Satellite Signal in the Solar Spectrum Vector (6SV) Radiative Transfer Model (RTM) to correct atmospheric effect, and Look-Up Table (LUT) to shorten the calculation time. We verified through comparison Himawri-8 / AHI surface reflectance and Proba-V S1 products. As a result, bias and Root Mean Square Error (RMSE) are calculated about -0.02 and 0.05.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.539-549
• /
• 1999

In this paper, the bit error rare (BER) performance of DS/CDMA DQPSK communication system in the presence of multi access interference, impulsive noise and Nakagami fading is investigated. The DS/CDMA DQPSK communication system adopts Maximum Ratio Combining (MRC) diversity reception and error correcting BCH code technique to enhance system performance. Using the derived error probability equation, the error rate performance of DS/CDMA DQPSK communication system has been evaluated and shown in figures to discuss as a function of impulsive index(A), Gaussian noise to impulsive noise power ratio($\Gamma$'), multi access interference(Κ), Nakagami fading parameter(m), the number of diversity branch (Ｌ), the number of error correction symbol (t), PN code sequence length(N) and $E_b/N_0$. The error performance of DS/CDMA-MDPSK signals improve by adopting MRC diversity and BCH(15,7) coding technique in the environment of impulsive noise plus Nagakami fading. From the results, we known that proposed system is affected by multi access interference, impulsive noise and Nakagami fading in radio communication system environment. Also, BER performance of DS/CDMA DQPSK communication system cam be improved increasing either the power of desired signal or the value of Gaussian noise to impulsive noise power ratio. And BCH(15,7) code technique is more effective to restrain the affection of multi access, interference, impulsive noise and Nakagami fading in DS/CDMA DQPSK communication system than MRC diversity reception technique.