• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.10
• /
• pp.402-407
• /
• 2016

Ground-coupled heat pump systems have been widely used, as they are regarded as a renewable energy source and ensure a high annual efficiency. Among the system components, borehole heat exchangers (BHE) play an important role in decreasing the entering water temperature (EWT) to heat pumps in the cooling season, and consequently improve the COP. The optimal sizing of the BHEs is crucial for a successful project. Other than the existing sizing methods, a simulation-based design tool is more applicable for modern complex geothermal systems, and it may also be useful since design and engineering works operate on the same platform. A simulation-based sizing method is proposed in this study using the well-known Duct STorage (DST) model in Trnsys. TRNOPT, the Trnsys optimization tool, is used to search for an optimal value of the length of BHEs under given ground loads and ground properties. The result shows that a maximum EWT of BHEs during a design period (10 years) successfully approaches the design EWT while providing an optimal BHE length. Compared to the existing design tool, very similar lengths are calculated by both methods with a small error of 1.07%.

• Journal of Sensor Science and Technology
• /
• v.25 no.2
• /
• pp.124-130
• /
• 2016

NDIR $CO_2$ gas sensor was built with ASIC implemented thermopile sensor which included temperature sensor and unique elliptical waveguide structures in this paper. The temperature dependency of dual infrared sensor module ($CO_2$ and reference IR sensors) has been characterized and its output voltage characteristics according to the temperature and gas concentration were proposed for the first time. NDIR $CO_2$ gas and reference IR sensors showed linear output voltages according to the variation of ambient temperatures from 243 K to 333 K and their slopes were 14.2 mV/K and 8.8 mV/K, respectively. The output voltages of temperature sensor also presented a linear dependency according to the ambient temperature and could be described with V(T)=-3.191+0.0148T(V). The output voltage ratio between $CO_2$ and reference IR sensors revealed irrelevant to the changes of ambient temperatures and gave a constant value around 1.6255 with standard deviation 0.008 at 0 ppm. The output voltage of $CO_2$ gas sensor at zero ppm $CO_2$ gas consisted of two components; one is caused by the HPB (half pass-band) of IR filter and the other is attributed to the part of $CO_2$ absorption wavelength. The characteristics of output voltages of $CO_2$ gas sensor could be accurately modeled with three parameters which are dependent upon the ambient temperatures and represented small average error less than 1.5% with 5% standard deviation.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.2
• /
• pp.156-160
• /
• 2012

Recently, the demands of the large scale machine tools gradually increase to machine the large parts, such as large scale crankshaft, yaw and pitch bearings for the wind power generator and the vehicle or aircraft components. But the high technology is necessary in order to develop the huge machine tools. Furthermore, the global market of it has been monopolized by a few companies. So, we need to develop the large scale machine tools and study its core technology to rush into the increasing market. In this study, we carried out the researches for the important core technology of a multi-tasking, machine tool; a large scale 5-axis machine tool of gantry type for multi-task machining. This study is focused on the design of large size gantry type multi-axis machine. In the case of large size of machine the cross rail deflection in the X-axis is significant. To reduce the deflection due to the eccentric spindle head, a special hollow type design in the cross rail with outside ram is adapted in this study. Also, the Zig-Zag motion in the Y-axis is inevitable with the gantry geometry, which is by the un-balancing, different motion at the left and the right columns moving. We tried to reduce the influence of Zig-Zag motion using FEM with different loading conditions at the left and the right side column.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.4
• /
• pp.17-23
• /
• 2001

The 3-D Hall sensor has two horizontal magnetic field sensing parts ($\chi$, y components) and one vertical magnetic field sensing part (z component). For conventional, 3-D Hall sensor it is general that the sensitivity for $B_{z}$ is about 1/10 compared with those for $B_\chi$ or $B_y$. Therefore, in this work, we proposed 3-D Hall sensor with new structure. We have increased the sensitivity about 6 times to form the trench using anisotropic etching. And we have increased the sensitivity for the $B_z$ by 80% compared with those of $B_\chi$ and$B_y$ using deposition of the ferromagnetic thin films on the bottom surface of the wafer to concentrate the magnetic fluxes. When the input current was 3 mA, sensitivities of the fabricated sensor with Ni/Fe film for $B_\chi, B_y$ and $B_{z}$ were measured as 120.1 mV/T, 111.7 mV/T, 95.3 mV/T, respectively. The measured linearity of the sensor was within $\pm$3% of error.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.4
• /
• pp.38-44
• /
• 2000

In this paper, we have been fabricated λ/2 phase plates lot an optical pick-up using a blue violet laser diode by employing proton exchange and wet etching in LiNbO$_{3}$. Their functions and fabrication processes are described in detail. It is established the optimal fabrication conditions through the experimental results. The device characteristics are measured by the Mach-zender interferometer which is composed of the optical components and 632.8nm He-Ne laser. The measured phase error was ＋5$^{\circ}$~ -6$^{\circ}$(within 3%). This phase plate could be applied an useful device to improve the resolution and the stability of the optical pick-up which has a blue violet laser diode as an optical source.

• The Korean Journal of Emergency Medical Services
• /
• v.9 no.2
• /
• pp.169-180
• /
• 2005

The purpose of this research was to evaluate retention of cognitive knowledge, psychomotor skills and self-confidence on CPR 3 months after CPR training program. The sample consisted of 39 nursing students. We provided one rescuer CPR training program for nursing college students on the basis of AHA. The questionnaires for knowledge of CPR were developed 50 items based on AHA guidelines. Self-confidence were checked by 11 items questionnaires. The accuracy of CPR skills were checked by Skillreporter CPR training manikin and by researcher's evaluation based on CPR skill checklist. The results were as follows ; 1. The majority of participants didn't have any previously experiences of CPR training (76.9%). Only 15.1% previously took the CPR training with CPR practice. 2. In terms of self-confidence of CPR. The score were increased for 2 days (p>.001) but retention of self confidence was significantly statistical decreased in 3 months after training (p<.001). 3. There was a statistically significant decrement in mean of knowledge of CPR between 2 days and 3 months after CPR training (p<.001). 4. There was a statistically significant decrement in cognitive knowledge of CPR based on CPR skills checklist(p<.001). 5. Retention scores of psychomotor skills of CPR 3 months after training were 42.10% in numbers of adequate ventilation, 52.81% in numbers of adequate chest compression (p<.001) respectively. 6. Retention of passing rate on chest compressions of CPR 3 months after training was 27% (p<.001), on ventilation was 2.63% (p>.001). The error items with statistically significant differences 3 months after CPR training were too little ventilation (74.36%) and too little chest compressions (92.31%). The results of the study suggest that we need further evaluation of course components which could improve retention of CPR for all trainees.

• Journal of the Korean School Mathematics Society
• /
• v.8 no.2
• /
• pp.183-201
• /
• 2005

Illustrations and letters are two components of school textbooks. In the case of low grades of elementary school, textbook's illustrations play an important role in learning because many parts of curriculums(lessons) are represented by the visual forms through illustrations. So elementary mathematics textbook's illustrations have to make clear mathematical concepts and principles by visual simplification and bring out of the interest and motivation of elementary school students' learning. In this paper, we analysed the external and content aspects of textbook's illustrations, focusing on the textbook of the second grade. We investigated number, kindness, size, ratio, and clearness of illustrations in regard to external aspects. On the aspects of content, we analysed the role of illustrations and the degree of agreement with contents. Also we classified types of error in the textbook's illustrations and presented examples of errors which was found.

• Progress in Medical Physics
• /
• v.27 no.3
• /
• pp.117-124
• /
• 2016

Intrafractional motion of patients, such as respiratory motion during radiation treatment, is an important issue in image-guided radiotherapy. The accuracy of the radiation treatment decreases as the motion range increases. We developed a control system for a robotic patient immobilization system that enables to reduce the range of tumor motion by compensating the tumor motion. Fusion technology, combining robotics and mechatronics, was developed and applied in this study. First, a small-sized prototype was established for use with an industrial miniature robot. The patient immobilization system consisted of an optical tracking system, a robotic couch, a robot controller, and a control program for managing the system components. A multi speed and position control mechanism with three degrees of freedom was designed. The parameters for operating the control system, such as the coordinate transformation parameters and calibration parameters, were measured and evaluated for a prototype device. After developing the control system using the prototype device, a feasibility test on a full-scale patient immobilization system was performed, using a large industrial robot and couch. The performances of both the prototype device and the realistic device were evaluated using a respiratory motion phantom, for several patterns of respiratory motion. For all patterns of motion, the root mean squared error of the corresponding detected motion trajectories were reduced by more than 40%. The proposed system improves the accuracy of the radiation dose delivered to the target and reduces the unwanted irradiation of normal tissue.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.349-351
• /
• 2013

This research paper presents a low-power programmable gain amplifier (PGA) to facilitate signal processing of the detection of defects in steel plates. This circuit is able to adjust a gain in the range of 6 to 60dB in 7 steps using different signal types for various defects from hall sensors. The gain of PGA is designed by operating on-resistors of switches and passive components. The proposed PGA ($0.18{\mu}m$ CMOS process with 1.8 supply voltage) showed excellent gain error of less than -0.2dB, and low power consumption of 0.47mW.

• Korean Journal of Cognitive Science
• /
• v.10 no.3
• /
• pp.67-75
• /
• 1999

We investigated whether human could perceive the heading direction from the optic flow made from random dots and real images simulating the motion of the observer and objects. When an object moves across the focus of expansion(FOE) in random dot simulation. the observer perceived the focus of expansion biased toward the motion direction of the object. supporting the hypothesis that the direction repulsion is produced between the expansional and the horizontal planar motion components. With real image display observers tended to perceive one's heading direction biased toward the c center of the scene regardless of the direction and position of moving 0bcts. And it was observed that the deeper the depth of the background was the larger the judgment error was. These results suggest it is more likely that human depends on different cues than the optic flow when they perceive or judge one's heading direction in the real environment.