• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.473-478
• /
• 2010

In this study, the Ergun's equation has been verified in order to calculate pressure drop of the two phase flow. The equation had been used in the high Reynolds number region for interior ballistic analysis in spite of being verified in the low Reynolds number region. Therefore additional verification seems to be inevitable. Thus, the validity of the equation has been verified using CFD in the high Reynolds number cases of the diameter-particle ratio 10, 13 and 16.

• 한국입자에어로졸학회지
• /
• 제19권4호
• /
• pp.145-154
• /
• 2023

Granular bed filters are widely used to remove particulate matter in flue gas and are filled with various shapes of packing material. The packing material plays an important role in determining the overall collection performance, such as pressure drop and collection efficiency. The pressure drop of a granular bed filter has been calculated using the Ergun equation, while the collection efficiency has been predicted using the log-penetration equation based on the single sphere theory. However, a prediction equation of collection efficiency for a granular bed filter filled with non-spherical packing materials has not been suggested yet. Therefore, in this study, three different shapes of packing materials (sphere, cylinder, and irregular) were prepared to propose a prediction equation. The pressure drop and collection efficiency in a granular bed filter filled with each shape of packing material were measured experimentally and compared with theoretically predicted values. We found that experimentally measured pressure drops matched well with values theoretically predicted using the Ergun equation considering the shape factor. However, experimental collection efficiencies were higher than theoretical ones predicted by the log-penetration equation using the single sphere theory. We modified the log-penetration equation by employing a shape factor and found a good relationship between experimental and theoretical collection efficiencies.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제13권1호
• /
• pp.11-21
• /
• 2005

The present paper investigates the heat transfer characteristics in a cylinder packed with porous medium of solid spheres for various parameters such as mass flow rate, sphere diameter, length of the porous medium, and gas temperatures. Pressures and temperatures at the inlet and outlet regions were measured by using static pressure gages and R-type thermocouples. The modified relationship based on the Ergun equation is suggested for the estimation of pressure drops. In addition, the useful empirical correlation for thermal efficiency is obtained in the current study. Thermal efficiency is expressed in terms of non-dimensional time, sphere diameter, porosity, and pressure drops. It is also found that the pressure drop through the cylinder becomes larger as the gas temperature does higher at the inlet region, whereas it substantially decreases when the inlet flow rate decreases.

• 대한기계학회논문집B
• /
• 제37권8호
• /
• pp.759-765
• /
• 2013

동축형 전단 분사기의 액적분포 균일도 및 혼합성능을 개선하기 위해 고안한 액체로켓 엔진용 동축형 다공성 분사기의 개발에 앞서 다공성재를 분사기에 적용하기 위해 다공성재를 통과하는 압축성 유체의 압력강하 특성을 파악하였다. Non-Darcy 유동의 압력강하는 점성력과 관성력으로 인한 손실을 포함하는 Forchheimer 방정식을 이용하여 도출할 수 있으며, 이 때 다공성재의 형상인자인 투과율과 관성력의 영향을 나타내는 Ergun 상수를 이용하여 다공성재를 통과하는 압축성 유체의 압력강하를 예측할 수 있다. 본 연구에서는 다공성재의 압력강하 특성을 나타내는 투과율와 Ergun 상수를 작동유체의 압력강하에 대한 함수로 나타내었으며, 최종적으로 이를 일반화하여 pore의 크기에 따라 압력강하를 예측할 수 있는 관계식을 도출하였다.

• 한국전산유체공학회지
• /
• 제16권2호
• /
• pp.62-65
• /
• 2011

Characteristics of the pressure drop in an expanded bed have been compared to those in a packed bed for numerical study of the interphase drag in gas-particle flows. A numerical analysis of the pressure drop by the particle drag has been conducted according to the tube-to-particle diameter ratios and Reynolds numbers for comparison. As the tube-to-particle diameter ratios increase at the same Reynolds number, the pressure drop tends to converge. It has been confirmed that characteristics of the pressure drop in the expanded bed are similar to those in the packed bed.

• 태양에너지
• /
• 제12권2호
• /
• pp.43-50
• /
• 1992

공기(空氣)가 통과(通過)하는 소결금속(燒結金屬)에서의 압력손실(壓力損失)에 대한 기초(基礎) 지식(知識)을 얻기 위하여 실험적(實驗的)으로 연구(硏究)를 수행(遂行)하여, 소결금속(燒結金屬)의 공극율(空隙率)과 소결금속(燒結金屬)을 통과(通過)하는 공기(空氣)의 유속(流速)이 압력손실(壓力損失)에 미치는 영향(影響)을 고찰(考察)하고, 또 본(本) 실험(實驗) 결과(結果)를 비소결금속(非燒結金屬)에서의 압력손실(壓力損失)에 대한 대표적(代表的)인 Ergun의 식(式)과 마찰계수(摩擦係數)의 관점(觀點)에서 비교(比較)하였다. 본(本) 연구결과(硏究結果), 소결금속(燒結金屬)에서의 압력손실(壓力損失)은 유속(流速)이 증가(增加)할 수록 증대(增大)하며, 또 동일 유속(流速)에서는 공극율(空隙率)이 감소(減少)(입자직경(粒子直徑)이 감소(減少))할 수록 증대(增大)한다. 특히 본(本) 실험(實驗) 결과(結果)를 소결금속(燒結金屬)의 두께와 직경(直徑) 및 입자직경(粒子直徑)의 무차원수(無次元數)들로 표현되는 무차원(無次元) 실험식(實驗式)으로 유도(誘導)하였으며, 이 실험식(實驗式)은 본(本) 연구결과(硏究結果)와 ${\pm}15%$ 범위에서 일치하고 있다.

• 대한설비공학회지:설비저널
• /
• 제13권3호
• /
• pp.168-182
• /
• 1984

For the purpose of drying high moisture rough rice effectively, from the view point of pre-drying, some basic experiments of fluidized bed drying of rough rice were carried out. The minimum fluidization velocities $(U_{mf})$ for both rough rice and glass bead were analyzed to find out fluidizing characteristics. The main results obtained were as follows ; 1) Minimum fluidization velocity of rough rice and glass bead were 2.01m/s and 4.07m/s, respectively, when using the distributor with $16\%$ opening ratio. 2) $U_{mf}$ calculated by Shirai's empirical equation and that calculated by Wen's modified equation were inconsistent with experimental data, while $U_{mf}$ calculated by Ergun's equation was consistent with the experimental data. 3) The following equations, on the basis of Leva's equation, were obtained. $$C_{mf}=1.19\times10^{-4}(Re_p)^{-0.0318)\;(rough rice)$$ $$C_{mf}=1.02imes10^{-4}(Re_p)^{-0.0047)\;(glass bead)$$

• 한국산업융합학회 논문집
• /
• 제24권5호
• /
• pp.573-579
• /
• 2021

In this study, flow analysis was performed on three types of strainers for ships with different flow rates to predict the pressure drop of the strainer due to the filter of strainer. In the case of flow analysis, the flow analysis was performed by applying the porous media method by applying the resistance value derived by Ergun's equation to the filter position. As a result of the analysis, it was found that when the dimensions of the strainer body were small, the influence of the flow rate on the pressure drop was large. In addition, the amount of pressure drop and the flow rate are almost linearly proportional, and an analysis formula that can predict the amount of pressure drop was derived. In order to predict the amount of pressure drop of the strainer when blockage exist in the strainer filter, the analysis was performed by introducing the resistance ratio to derive the prediction equation. Using this equation, it is thought that it will be possible to predict the performance of the strainer due to blockage in the future strainer design and field application.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1520-1523
• /
• 1997

A rigorous dynamic simulation was performed in binary gas mixture H$_{2}$/CO (70:30 vol.%) to determinate start-up operating conditions of PSA(Pressure Swing Adsorption) processes. The rigorous dynamic model for the PSA process contains an Ergun equation for expressing the pressure drop in a bed, and valve equations to compute the boundary pressure change of the bed. As the result of the continuous dynamic simulation of 100 operating cyles in various initial conditions, the unsteady-state appeared in the early period and the cyclic steady-state came out about 20th cycle in feed condition and vaccum condition, and 30th cycle in pure H$_{2}$ condition. As time goes by valve equations made change the pressure at each end of the bed in ressurization, countercurrunt-depressurization and pressure equalization steps. The H$_{2}$ purity and the recovery is 99.99% and 86.73% respectively, which is slightly higher than the experimental data. Main contributiion of this study includes supplying fundamental technologies of handling combined variables PSA processes by developing rigorous models.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.310-314
• /
• 2009

A numerical code for the interior ballistics has been investigated. The method of the ghost cell extrapolation has been used for the moving boundary with the projectile movement. The porosity effect and the Ergun's Equation have been used in the numerical calculation for the grain combustion. The calculation results of the numerical code have been compared and verified through those of the lumped parameter method. Computerization techniques of the numerical analysis for the interior ballistics have been developed.