• ETRI Journal
• /
• v.33 no.2
• /
• pp.176-183
• /
• 2011

This paper presents a new analytical approach and experimental verification for the improvement of noise performance in phased-array receivers. For analysis purposes, a multi-channel array system is converted into an equivalent single-channel system, such that the two presents the identical signal and noise powers at the output, respectively. We define an effective gain, noise figure, and signal-to-noise ratio in the equivalent system. Through the proposed approach, the noise performance of the array receiver is analyzed in a general and straightforward manner and then compared to that of each individual array channel. In addition, the phase noise of the array system is analyzed in a rigorous manner, showing its effective reduction by a factor of the array size. The predicted improvement of the noise performance is experimentally confirmed with a CMOS integrated phased-array receiver.

• Korean Journal of Materials Research
• /
• v.14 no.5
• /
• pp.353-357
• /
• 2004

The influences of the ozone oxidation, reaction temperature and NaOH equivalent ratio on the iron oxide formation were studied with fixed ferrous sulfate concentration(0.5M $FeSO_4$ㆍ$7H_2$O). Geothite($\alpha$-FeOOH) and/or Magnetite ($Fe_3$$O_4$) were synthesized depending on the reaction conditions. The characteristics of the synthesized powders were evaluated by XRD, SEM and quantitative phase analysis. The synthetic conditions to get Goethite were quite different from the results of Kiyama's and the Goethite was conveniently synthesized at low temperature and at low NaOH equivalent ratio.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.333-336
• /
• 2005

The reduction behavior of $Nb_2O_5$ in aluminum containing self-reducing briquettes(SRNB) was investigated. The time required for slag/metal equilibrium was estimated as about 20 minutes from the addition of SRNB on to the surface of molten steel. The maximum yield of Nb was expected with the slag composition of $60\%CaO-40\%Al_2O_3$. When $CaCO_3$ was used as a flux, the oxidation loss of Al by $CO_2$ should be compensated, and the chemical equivalent ratio of Al to $Nb_2O_5$ of about 1.43 was required to maximize the yield of Nb.

• Journal of information and communication convergence engineering
• /
• v.16 no.4
• /
• pp.203-212
• /
• 2018

In this article, a novel design of patch antenna with wide band characteristics is presented. The proposed antenna is having electrical dimensions of $0.14{\lambda}{\times}0.11{\lambda}$ (at lower initial frequency) and footprints of $150mm^2$. Structural parameters optimization shows 3.1-23.5 GHz frequency range for a (reflection coefficient) $S_{11}{\leq}-10dB$ and simulated gain 6.8 dB is obtained. An equivalent circuit model is proposed to get an insight view of antenna. Advanced Systems Design (ADS) simulation results are obtain which confirm the validity of proposed model. Degenerated foster canonical form has been used to explain the reactance and capacitive behavior idea of simulated proposed antenna's input impedance later on an equivalent circuit model and smith chart is also suggested. HFSS and CST have been used to analyze antenna behavior. The proposed antenna can be further used for microwave image detection applications.

• Analytical Science and Technology
• /
• v.36 no.4
• /
• pp.191-197
• /
• 2023

Radioactivity concentrations for natural radionuclides were determined from fine dust samples collected in Jeju, Korea according to atmospheric events (Asian dust, haze, fog-mist, and non-event), and radium equivalent activity was calculated. The mean atmospheric radioactivity concentrations for ²³⁸U, ²³²Th, and ⁴⁰K in 127 fine dust samples were 0.49, 0.24, and 7.23 µBq m^-3, respectively, and the radium equivalent activity was 33.25 Bq kg^-1. The mean concentrations of ²³⁸U and ²³²Th in the fine dust during the Asian dust period were 1.31 and 1.60 µBq m^-3, respectively, above the global average, while the values for the other three atmospheric events were lower. The ratio of ²³²Th/²³⁸U radioactivity during the Asian dust period was 1.22, higher than the ratio for the other three atmospheric events.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.3
• /
• pp.291-295
• /
• 2008

We have developed an evaluation technique for ratio errors of current transformer (CT) comparator by using the precise standard capacitors. By applying this technique for equivalent circuit of CT comparator evaluation system, we can obtain the calculated and measured ratio errors in the CT comparator. Thus we can evaluate ratio errors of CT comparator by comparing the calculated and measured ratio errors. Because this method requires only the standard capacitors, it is simple and easy method to reliability and accuracy maintenance of CT comparator. The method was applied to CT comparator under test with the ratio error ranges of $0{\sim}{\pm}10%$. The ratio error of the CT comparator under test theoretically obtained in this method are consistent with that measured for same CT comparator under test by using wide ratio error CT within an estimated expanded uncertainty (k = 2) in the overall ratio error ranges.

• Journal of the Korean Institute of Gas
• /
• v.4 no.2 s.10
• /
• pp.27-32
• /
• 2000

In this study, $Mn_3O_4$ was synthesized by the different equivalent ratios using solution of $MnCL_2 {\cdot} 4H_2O$ and NaOH. We have investigated the crystal structure and surface area by XRD, BET Method, studied on the decompositon and adsorption of carbon dioxide with synthesized $Mn_3O_4$. As the results, we surveyed that main peak was $Mn_3O_4$, some Peaks were $MnO_2$ and $Mn_5O_8$ The specific surface area was ranged from $13.92m^2/g$ to $32.33m^2/g$. The decomposition of $CO_2$ was observed by the differential equivalent ratios at $450^{\circ}C$. $CO_2$ was well decomposed at equivalent ratio of 0.75. The amount of chemisorption of $CO_2$ was ranged from 2.885 to 19.628cc/g. Optimal equivalent ratio was 1.00 for the chemisorption of $CO_2$.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.1 s.41
• /
• pp.9-16
• /
• 2005

The purpose of this paper is to present a design procedure of a friction damper for controlling elastic and inelastic responses of building structures under earthquake excitation. The equivalent damping and period increased by the friction damper are estimated using ATC-40 and ATC-55 procedures which provide equivalent linear system for bilinear one, and then a design formula to achieve target performance response level by the friction damper is presented. It is identified that there exists error between the responses obtained by this formula and by performing nonlinear analysis and the features of the error vary according to the hardening ratio, yield strength ratio, and structural period. Equations for compensating the error are proposed based on the least square method, and the results from numerical analysis indicate that the error is significantly reduced. The proposed formula can be used without much error for designing a friction damper for retrofitting a structure showing elastic or inelastic behavior.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.6
• /
• pp.503-508
• /
• 2009

There are many researches on human effect by electromagnetic equipments and applications. However, most of research and guidelines for limiting human exposure to electromagnetic fields are established by mobile communication of SAR(Specific Absorption Ratio). Therefore we need to study different effects on human body when exposed to high frequency(HF) band equipments, such as human induced current etc. In this paper, we measured human induced current by RFID reader antenna of HF band in the near field and we propose human equivalent antenna which has orthogonal loops to each other. Then, we compared the induced currents on proposed equivalent antenna with human.

• Journal of Radiation Protection and Research
• /
• v.47 no.2
• /
• pp.77-85
• /
• 2022

Background: After the Fukushima Daiichi Nuclear Power Station (FDNPS) accident, a model was developed to estimate the external exposure doses for residents who were expected to return to their homes after evacuation orders were lifted. However, the model's accuracy and uncertainties in parameters used to estimate external doses have not been evaluated. Materials and Methods: The model estimates effective doses based on the integrated ambient dose equivalent (H^*(10)) and life patterns, considering a dose reduction factor to estimate the indoor H^*(10) and a conversion factor from H^*(10) to the effective dose. Because personal dose equivalent (H_p(10)) has been reported to agree well with the effective dose after the FDNPS accident, this study validates the model's accuracy by comparing the estimated effective doses with H_p(10). The H_p(10) and life pattern data were collected for 36 adult participants who lived or worked near the FDNPS in 2019. Results and Discussion: The estimated effective doses correlated significantly with H_p(10); however, the estimated effective doses were lower than H_p(10) for indoor sites. A comparison with the measured indoor H^*(10) showed that the estimated indoor H^*(10) was not underestimated. However, the H_p(10) to H^*(10) ratio indoors, which corresponds to the practical conversion factor from H^*(10) to the effective dose, was significantly larger than the same ratio outdoors, meaning that the conversion factor of 0.6 is not appropriate for indoors due to the changes in irradiation geometry and gamma spectra. This could have led to a lower effective dose than H_p(10). Conclusion: The estimated effective doses correlated significantly with H_p(10), demonstrating the model's applicability for effective dose estimation. However, the lower value of the effective dose indoors could be because the conversion factor did not reflect the actual environment.