• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.5
• /
• pp.684-689
• /
• 1990

We design a circular microstrip array antenna using the admittance of circular resonator. We can design the array antenna, considering equivalent radius of circular microstdrip consistant with conductances which are obtained from excitation coefficeients of the array elements. The antenna with 10 array elements are made on teflon substrate from Tshebyscheff method. It's perfermence are the gain 8.9dB, half power beam width 11.3dge, max, side lobe level -19dB, and they are almost in agreement with the theoretical results.

• Tribology and Lubricants
• /
• v.15 no.2
• /
• pp.164-170
• /
• 1999

Gerotor is widely used as a hydraulic pump or motor, by virtue of its volume changing ability. Performance deterioration of a gerotor hydraulic motor mainly due to the wear come from the contact between inner rotor with trochoidal curve and outer rotor with circular arc profile. This research covers the basic investigation about the contact forces of a gerotor hydraulic motor using analytic method. The influence of the eccentricity and the radius of circular arc teeth on the contact stress was evaluated.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.258-264
• /
• 1999

In this study, a computer program was developed for analysis of the orthotropic curved ring sector plates. In the developing program , the thin-plate theory and multi-base coordinate system was adopted. The effect of design factors-boundary conditions, loading conditions, steel ratio, open angle, radius of curvature and relative flexural rigidity between slab and edge-beam-on the behavior of the circular ring sector plates were discussed. Also, the practical limitations was proposed to replace the problem of the orthotropic sector plate by equivalent rectangular plage.

• Structural Engineering and Mechanics
• /
• v.48 no.4
• /
• pp.501-518
• /
• 2013

Apart from thinning of cortical layers, the local bone curvature, varying along bone periphery, modulates ultrasound waves as well, which is however often underestimated or overlooked in clinical quantitative ultrasound (QUS). A dedicated three-dimensional finite element modelling technique for cortical bones was established, for quantitatively exploring and calibrating the effect of local curvature of cortical bone on ultrasound. Using a correlation-based mode extraction technique, high-velocity group (HVG) and low-velocity group (LVG) wave modes in a human radius were examined. Experimental verification using acrylic cylinders and in vitro testing using a porcine femur were accomplished. Results coherently unravelled the cortical curvature exerts evident influence on bone-guided ultrasound when RoC/${\lambda}$ <1 for HVG mode and RoC/${\lambda}$ <2 for LVG mode (RoC/${\lambda}$: the ratio of local bone curvature radius to wavelength); the sensitivity of LVG mode to bone curvature is higher than HVG mode. It has also been demonstrated the local group velocity of an HVG or LVG mode at a particular skeletal site is equivalent to the velocity when propagating in a uniform cylinder having an outer radius identical to the radius of curvature at that site. This study provides a rule of thumb to compensate for the effect of bone curvature in QUS.

• Journal of the Korea Convergence Society
• /
• v.8 no.7
• /
• pp.219-224
• /
• 2017

This paper investigates equivalent stress and deformation happening at inner fiber structure when the tensile force acts on the specimen with arch type composed of carbon fiber. The countless many each fiber is applied on the unidirectional axis at CFRP and has the high specific strength and stiffness by comparing with iron. In this study, the distribution of stress due to radius is investigated at the structure of arch type composed with the optimum stacking angle of $60^{\circ}$. And the durability is seen to be lower as the radius increases at the same stacking angle. By applying the result of this study to the design of structure with arch type, it can be devoted to the safe design for the prevention of damage and the durabilty improvement. And it is possible to be grafted onto the convergence technique at the designed factor and show the esthetic sense.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.807-812
• /
• 1997

For an equivalent uniform soil model to multiple-layered soil structure, ground depth, which is used in the calculation of equivalent resistivity, should be varied according to the size of grounding area. In case of 150 kV substation grounding design, 15 m of ground depth has been used and 25 m for 345 kV, But applying these ground depths can lead to errors in grounding resistance calculation, and these errors are coming from the poor representation of those depths to real soil resistivities. In this paper, the soil resistivity measurement techniques by Wenner method and grounding resistance calculation results by computer simulation were presented. Case studies contain the area from 3,000 to $30,000\;m^2$ and measuring space from of m to $100{\sim}250\;m$, Based of the computation results, 50 m, 60 m and 80 m of ground depth for less than 30, 40 and 70 m of equivalent hemispherical radius were proposed respectively.

• Journal of The Korean Astronomical Society
• /
• v.24 no.2
• /
• pp.151-159
• /
• 1991

Using the photographic imagery of the SO galaxy NGC 5102, the equivalent luminosity profile and the fractional integrated luminosity curve have been derived. Several photometric parameters of the galaxy, such as a total magnitude ($B_T$), equivalent radius ($r^*_e$), effective surface brightness (${\mu}^*_e$), and concentration indices ($C_{21}$, $C_{32}$) were derived from the luminosity profiles. According to the decomposition method from the nonlinear least squares fitting, photometric parameters of the bulge (${\mu}_e$, $r_e$) and the exponential disk (${\mu}(0)$, ${\alpha}^{-1}$), and the bulge to total luminosity ratio (B/T) were obtained. The derived central disk surface brightness (${\mu} (0)\;=\;22.06\;{\pm}\;0.18\;mag/\Box"$) and the evaluated B/T ratio (= 0.52) of the NGC 5102 are close to the mean values (${\mu} (0)\;=\;21.65\;{\pm}\;0.3\;mag/\Box"$, B/T=0.63) of the SO galaxies. Analysis showed that a lens-like hump is embedded in the equivalent luminosity profile of the NGC 5102.

• Journal of the Optical Society of Korea
• /
• v.17 no.6
• /
• pp.538-542
• /
• 2013

We propose a simple model to elucidate the dispersion behavior of spiraling modes on silver nanowire by finding correspondence parameters and building a simple equivalent relationship with the planar insulator-metal-insulator geometry. The characteristics approximated for the proposed structure are compared with the results from an exact solution obtained by solving Maxwell's equation in cylindrical coordinates. The effective refractive index for our proposed equivalent model is in good agreement with that for the exact solution in the 400-2000 nm wavelength range. In particular, when the radius of the silver nanowire is 100 nm, the calculated index shows typical improvements; the average percentage error for the real part of the effective refractive index is reduced to only 5% for the $0^{th}$ order mode (11.9% in previous results) and 1.5% for the $1^{st}$ order mode (24.8% in previous results) in the 400-800 nm wavelength range. This equivalent model approach is expected to provide further insight into understanding the important behavior of nanowire waveguides.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.2
• /
• pp.21-28
• /
• 2011

Several theoretical soil nonlinear models to predict damping ratio, which is one of the typical dynamic properties of soils, it is impractical to predict damping ratio. The resonant column and torsional shear test(RC-TS) is used to represent the dynamic behavior of soils from intermediate to medium shear strains. A limitation of RC-TS is measure precise shear strain in large strains and the modified equivalent radius($R_{eq}$) was obtained using both modified hyperbolic model and Ramberg-Osgood model. Bonneville clays were tested using RC-TS test to obtain rotation and torque. The measured rotation and torque were then compared with calculated rotation and torque using curve-fitting method. Then, the nonlinear soil model parameters were obtained and the equivalent radius was calculated using the model parameters.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.5
• /
• pp.43-50
• /
• 2001

딜라토메터는 실험의 간편성, 경제성, 신속성 및 반복성 등을 바탕으로 현장에서의 지반공학적 물성추정에 보편화되고 있다. 또한 간단한 장비구성과 손쉬운 사용법에도 불구하고 다양한 지반공학적 물성들 -예로서, $K_{o}$ , OCR, $c_{u}$ , $\psi$, $c_{h}$, $k_{h}$, ${\gamma}$, M, $u_{o}$ -을 추정할 수 있으며 다양한 지반공학적 설계문제에 성공적으로 적용되어 왔다. 그러나 제안된 관계식들이 대부분 기존실험 결과들과의 비교를 통하여 얻어진 경험적 상관관계이며, 특히 압밀계수 추정에 관한 부분은 관입시 평면변형 상태의 지반변형으로 인한 관입모사의 복잡성으로 인하여 피에조콘 소산시험 해석을 위해 제안된 이론 해들에 경험적인 가정사항들을 추가하여 사용하는 반경험적 방법들과 순수한 경험적인 방법이 사용되어 왔다. 본 연구에서는 elf라토메터 관입기의 실제 평면적을 등가의 원형반경으로 고려한 등가반경을 사용하고 최적화기법을 적용함으로써, 소산시험에서 실제 관측된 간극수압($p_2$)과 딜라토메터 소산시험을 모사하여 얻어진 예측 간극수압의 차이를 최소화하는 수평압밀계수 추정법을 제안하였다. 제안된 방법을 국내 양산지역에서 수행된 딜라토메터 소산실험에 적용하였으며 추정된 수평압밀계수 값을 기존의 딜라토메터 수평압밀계수 추정법들과 불교란 시료를 이용한 일차원 실내 압밀실험으로 얻어진 수평압밀계수 값들과 비교검증 하였다. 그 결과 제안된 방법으로 기존의 방법에 비해 실내 압밀실험 결과와 일치하는 수평압밀계수 추정결과를 얻었다. 또한, 제안된 방법으로 얻어진 수평압밀계수는 전 소산도 범위에서 고르게 관측값과 일치하는 소산곡선을 예측하여, 최적화기법을 이용한 딜라토메터 소산시험 해석으로 전 소산과정을 대표하는 압밀계수의 추정이 가능할 것으로 사료된다.