• Tribology and Lubricants
• /
• 제14권3호
• /
• pp.94-99
• /
• 1998

Generally not only the radial load but also the moment may be applied to the ball bearings for a shaft system. However it has been difficult to determine the static equivalent load because there is the radial static equivalent equation only for the axial and radial force on the bearings. In this paper, the same static equivalent radial load which makes the maximum contact force at the interface between the ball and groove as the applied radial force and moment generate is calculated under the condition that the radial force and the moment are applied to the bearings simultaneously. The relation between the static equivalent load and applied force is studied. Therefore the simple and effective equation for the static equivalent radial load of the radial load and moment is proposed for the deep groove ball bearings.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.236-240
• /
• 2013

Due to difficulty of considering dynamic load in side of a computer resource and computing time, it is common that external load is assumed as ideal static load. However, structural analysis under static load cannot guarantee the safety of structural design. Recently, the systematic method to construct equivalent static load from the given dynamic load has been proposed. Previous study has calculated equivalent static load through the optimization procedure under displacement constraints. And previously reported works to distribute equivalent static load were based on ad hoc methods. However, it is appropriate to take into account the stress constraint for the safety design. Moreover, the improper selection of loading position may results in unreliable structural design. The present study proposes the methodology to optimize an equivalent static which distributed on the primary DOFs, DOFs of the constraint elements, DOF of an external load as positions. In conclusion, the reliability of proposed method is demonstrated through a global optimization.

• 대한기계학회논문집A
• /
• 제24권8호
• /
• pp.1949-1957
• /
• 2000

All the loads in the real world act dynamically on structures. Since dynamic loads are extremely difficult to handle in analysis and design, static loads are utilized with dynamic factors. The dyna mic factors are generally determined based on experiences. Therefore, the static loads can cause problems in precise analysis and design. An analytical method based on modal analysis has been proposed for the transformation of dynamic loads into equivalent static load sets. Equivalent static load sets are calculated to generate an identical displacement field in a structure with that from dynamic loads at a certain time. The process is derived and evaluated mathematically. The method is verified through numerical tests. Various characteristics are identified to match the dynamic and the static behaviors. For example, the opposite direction of a dynamic load should be considered due to the vibration response. A dynamic bad is transformed to multiple equivalent static loads according to the number of the critical times. The places of the equivalent static load can be different from those of the dynamic load. An optimization method is defined to use the equivalent static loads. The developed optimization process has the same effect as the dynamic optimization which uses the dynamic loads directly. Standard examples are solved and the results are discussed

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.375-380
• /
• 2007

The goal of this paper is to develop a rational static method which consider efficiently the dynamic effect of the gravity load following sudden removal of element. For this goal this paper introduce the equivalent load for element stiffness which is a preceding research result and will develop equivalent static analysis which will be able to predict the maximum behavior considering dynamic effect. Some examples are provided to verify it. Equivalent static analysis is compared with the analysis method which is recommended by the GSA2003 guidelines and the time-history analysis which is the most accurate for dynamic behavior.

• 한국전산구조공학회논문집
• /
• 제26권2호
• /
• pp.165-171
• /
• 2013

동하중을 고려하는 구조해석은 전산자원과 시간측면에서 상당한 어려움이 따르기 때문에 외력을 이상적인 정하중으로 가정하는 것이 일반적이다. 그러나 정하중 조건으로 해석된 결과는 구조물의 안전설계 측면에서 충분한 신뢰를 주기 어렵다. 최근에는, 동하중의 영향을 받는 구조물의 효과적인 구조해석을 위해 동하중을 등가정하중으로 변환하는 기법이 제안되어 왔다. 이 기법은 최적화를 통해 구속조건을 만족하는 최소의 등가정하중을 구하는데, 구속조건은 임계시간의 변위를 사용하고, 등가정하중 분포 자유도는 경험적으로 선정하여 왔다. 그러나 안전설계 관점에서는 응력 구속조건을 적용하는 것이 타당하며, 경험적 자유도 선정은 몇 개의 자유도에 과도한 하중이 부과되거나 구조물의 거동에 영향력이 없는 자유도들이 선정될 가능성이 있다. 본 연구에서는 등가응력 구속조건을 고려하는 등가정하중 최적화 방법을 제안하고, 축소시스템 개념을 도입한 주자유도, 구속조건 요소 자유도, 외부하중 자유도로 구성되는 등가정하중 분포 자유도의 구성방법을 제안한다. 수치예제에서는 제안된 방법으로 구해진 등가정하중을 사용하여 등가응력을 구하고 동하중 해석 결과와 비교함으로써 제안된 방법을 통한 구조해석 방법이 구조안전성 측면에서 타당함을 보인다.

• 대한기계학회논문집A
• /
• 제30권1호
• /
• pp.66-75
• /
• 2006

Nonlinear response structural optimization using equivalent static loads (NROESL) has been proposed. Nonlinear response optimization is solved by sequential linear response optimization with equivalent static loads which are generated from the nonlinear responses and linear stiffness matrix. The linear stiffness matrix should be obtained in NROESL, and this process can be fairly difficult for some applications. Proportional transformation of loads (PTL) is proposed to overcome the difficulties. Equivalent static loads are obtained by PTL. It is the same as NROESL except for the process of calculating equivalent static loads. PTL is developed for large-scale probems. First, linear and nonlinear responses are evaluated from linear and nonlinear analyses, respectively. At a DOF of the finite element method, the ratio of the two responses is calculated and an equivalent static load is made by multiplying the ratio and the loads for linear analysis. Therefore, the mumber of the equivalent static loads is as many as that of DOF's and an equivalent static load is used with the reponse for the corresponding DOF in the optimization process. All the equivalent static loads are used as multiple loading conditions during linear response optimization. The process iterates until it converges. Examples are solved by using the proposed method and the results are compared with conventional methods.

• Wind and Structures
• /
• 제8권6호
• /
• pp.443-454
• /
• 2005

Wind loading is very important, even dominant in some cases, to large-span single-layer reticulated shells. At present, usually equivalent static methods based on quasi-steady assumption, as the same as the wind-resistant design of low-rise buildings, are used in the structural design. However, it is not easy to estimate a suitable equivalent static wind load so that the effects of fluctuating component of wind on the structural behaviors, especially on structural stability, can be well considered. In this paper, the effects of fluctuating component of wind load on the stability of a single-layer reticulated spherical shell model are investigated based on wind pressure distribution measured simultaneously in the wind tunnel. Several methods used to estimate the equivalent static wind load distribution for equivalent static wind-resistant design are reviewed. A new simple method from the stability point of view is presented to estimate the most unfavorable wind load distribution considering the effects of fluctuating component on the stability of shells. Finally, with comparisive analyses using different methods, the efficiency of the presented method for wind-resistant analysis of single-layer reticulated shells is established.

• 한국자동차공학회논문집
• /
• 제8권1호
• /
• pp.157-162
• /
• 2000

The ball bearings are the widely-used machine elements in many machineries. They support not only the radial and the axial force but also the moment in many cases. To simply determine the limit load which can be maintained on an ball bearing or survived in wanted life, the combined the radial and axial force with the moment is converted to the equivalent radial or axial load. However, it is not easy to calculate the equivalent load on the ball bearings. So the simplified equations to evaluate the dynamic and static equivalent load considering the axial force and moment are proposed in this analysis. And the modified equation for the static equivalent radial load with the moment and the axial load is proposed. It is desired that these equations are effectively refered in designing the machineries where the ball bearings are installed.

• 한국전산구조공학회논문집
• /
• 제27권5호
• /
• pp.421-427
• /
• 2014

현실세계의 구조물은 대부분 동하중의 영향을 받고 있지만, 구조해석이나 구조 최적화를 수행할 때는 정하중이 작용하는 것으로 가정한다. 실제 하중인 동하중을 고려하게 되면 다양한 하중들을 고려해야 하기 때문에 전산자원과 시간비용 측면에서 많은 제약이 따르기 때문이다. 그러나, 단순한 정하중 조건만을 고려하면 구조안전성 측면에서 바람직하지 못하기 때문에 가중치를 적용하거나 동하중을 대체하는 등가정하중을 적용하여 관련 문제를 보완하려는 연구가 진행되어 왔다. 본 연구에서는 등가정하중을 적용하여 동하중을 받고 있는 구조물에 대한 구조최적화 기법을 제안한다. 본 연구에서 적용하는 등가정하중은 기존 연구에서 제안한 바 있는 주자유도를 기반으로 하여 등가정하중 부과 위치를 결정하고 최적화 과정을 통해 산출한다. 이 과정에서 지나치게 큰 하중이 구해지지 않도록 가중치를 고려한 구속조건을 추가하여 기존 연구의 등가정하중의 최적화 과정을 보완하였다. 수치예제에서는 동하중이 작용하는 트러스 구조물과 평판 구조물에서 최적화된 등가정하중을 적용하여 사이즈 최적화를 수행함으로써 제안된 최적화 기법의 신뢰성을 검증한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1316-1321
• /
• 2003

The systematic method to construct equivalent static load from the given dynamic load is proposed in the present study. Previously reported works to construct equivalent static load were based on ad hoc methods. They may results in unreliable structural design. The present study proposes a selection scheme of degrees of freedom(d.o.f) for imposing the equivalent static loads. The d.o.fs are selected by Two-level condensation scheme(TLCS). TLCS consists of two two-steps. The first step is the energy estimation in element-level and the second step consists of the traditional sequential elimination precudure. Through several numerical examples, the efficiency and reliability of proposed scheme is verified.