• 한국광학회지
• /
• 제33권6호
• /
• pp.275-286
• /
• 2022

광학설계 과정의 첫 단계에서 근축 광선이 만족하는 Gauss 방정식에 대한 해를 구할 수 있는 재귀적 수치 계산법을 도출하였다. 설계 사양으로 렌즈 모듈의 굴절력, 렌즈 제1 주요면으로의 입사각과 제2 주요면으로부터의 출사각이 주어지면 렌즈의 주요면 사이의 거리를 선택한 후, 재귀적 수치 계산법을 적용하여 렌즈의 두께, 렌즈 앞면의 곡률 반경과 뒷면의 곡률 반경을 구할 수 있다. 즉, 설계 사양을 만족하는 두께가 다른 여러 등가렌즈를 얻을 수 있다. 모듈이 2개 이상의 렌즈로 구성되는 경우에도 렌즈의 개수를 하나씩 증가하면서 렌즈의 주요면 사이의 거리를 설계 사양에 맞추어 선택한 후 각 렌즈의 두께와 곡률 반경을 결정할 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.492-497
• /
• 2013

In this study, a parametric study is performed to investigate the squeal noise of an automobile water pump. The squeal noise studied in this paper is generated by the self-excited torsional resonance of the rotating shaft, and this noise is related to the stick-slip phenomenon of the mechanical seal in the water pump. The mechanical seal friction has the characteristics of the negative velocity-gradient. The equations of motion of multiple-degree-of-freedom torsional vibration model is constructed by the Holzer's method and then the equation is transformed to an equivalent single-degree-of-freedom torsional resonance simulation model. A squeal noise criteria is determined by the simulation model to perform the parametric study. The design parameters(the mass moment of inertia of the pulley, the mass moment of inertia of the impeller, the length of the shafts, the radius of the shafts, spinning speed of the shafts, the position of the mechanical seal, radius of the mechanical seal, and normal load of the mechanical seal) are investigated to confirm the stability for the squeal noise.

• 한국소음진동공학회논문집
• /
• 제23권7호
• /
• pp.624-630
• /
• 2013

In this study, a parametric study is performed to investigate the squeal noise of an automobile water pump. The squeal noise studied in this paper is generated by the self-excited torsional resonance of the rotating shaft, and this noise is related to the stick-slip phenomenon of the mechanical seal in the water pump. The mechanical seal friction has the characteristics of the negative velocity-gradient. The equations of motion of multiple-degree-of-freedom torsional vibration model is constructed by the Holzer's method and then the equation is transformed to an equivalent single-degree-of-freedom torsional resonance simulation model. A squeal noise criteria is determined by the simulation model to perform the parametric study. The design parameters(the mass moment of inertia of the pulley, the mass moment of inertia of the impeller, the length of the shafts, the radius of the shafts, spinning speed of the shafts, the position of the mechanical seal, radius of the mechanical seal, and normal load of the mechanical seal) are investigated to confirm the stability for the squeal noise.

• Current Optics and Photonics
• /
• 제3권3호
• /
• pp.199-203
• /
• 2019

The characteristics of a photonic crystal fiber sensor with reuleaux triangle are studied by using the finite element method. The wavelength sensitivity of the designed optical fiber sensor is related to the arc radius of the reuleaux triangle. Whether the core area is solid or liquid as well as the refractive index of the liquid core contributes to wavelength sensitivity. The simulation results show that larger arc radius leads to higher sensitivity. The sensitivity can be improved by introducing a liquid core, and higher wavelength sensitivity can be achieved with a lower refractive index liquid core. In addition, the specific channel plated with gold film is polished and then analyte is deposited on the film surface, in which case the position of the resonance peak is the same as that of the complete photonic crystal fiber with three analyte channels being filled with analyte. This means that filling process becomes convenient with equivalent performance of designed sensor. The maximum wavelength sensitivity of the sensor is 10200 nm/RIU and the resolution is $9.8{\times}10^{-6}RIU$.

• Structural Engineering and Mechanics
• /
• 제90권1호
• /
• pp.97-106
• /
• 2024

This paper presents a significant contribution to aided design by conducting an analytical examination of geometric links with the aim of establishing criteria for assessing an analogy measure of the extrinsic geometric and kinematic characteristics of the Variable Compression Ratio (VCR) engine with a Geared Mechanism (GBCM) in comparison to the existing Fixed Compression Ratio (FCR) engine with a Standard-Reciprocating Crankshaft configuration. Employing a mechanical approach grounded in projective computational methods, a parametric study has been conducted to analyze the kinematic behavior and geometric transformations of the moving links. The findings indicate that in order to ensure equivalent extrinsic behavior and maintain consistent input-output performance between both engine types, precise adjustments of intrinsic geometric parameters are necessary. Specifically, for a VCR configuration compared to an FCR configuration, regardless of compression ratio and gearwheel radius, for the same crankshaft ratios and stroke lengths, it is imperative to halve lengths of connecting rods, and crank radius. These insights underscore the importance of meticulous parameter adjustment in achieving comparable performance across different engine configurations, offering valuable implications for design optimization.

• 한국전산구조공학회논문집
• /
• 제15권4호
• /
• pp.639-647
• /
• 2002

본 연구에서는 원주형 절취 독본(dogbonc) 내진 접합부 도입에 따른 철골모멘트골조의 횡강성 감소 정도를 용이하게 산정할 수 있는 실용적 해석기법을 제안하였다. 된 연구의 방안은 원래의 원주형 절취 형상의 독본에서 발생하는 신장량과 동일한 크기의 신장량이 유발되도록 등가의 균등한 유효폭을 갖는 독본 형상으로 치환하는 것에 근거하고 있다. 등가 유효폭을 도입하는 목적은 공액보법을 적용하여 보의 휨변형에 의한 골조의 횡변위 성분을 유도할 때 수행되는 전분을 해석적으로 하기 위함이다. 이러한 접근법의 타당성을 먼저 검증된 유한요소해석모델에 의해 확인한 후, 기둥, 패널존 그리고 보의 변형에서 기인하는 골조의 횡변위 성분을 독본의 존재를 고려하여 해석적으로 유도하였다. 이 유도결과를 이용한 사례분석에 의할 때, 독본의 도입에 따른 횡변위 증가율은 2%∼3%(횡강성 감소율로는 1%∼2%) 정도로서 실무적으로 무시할 수 있는 크기로 나타났다.

• 한국안광학회지
• /
• 제16권3호
• /
• pp.293-297
• /
• 2011

목적: 본 연구는 고령의 성인을 대상으로 굴절이상과 안광학 성분들 사이의 연관성을 알아보고자 하였다. 방법: 안과적 수술을 받지 않은 고령의 95명을 대상으로 굴절이상과 각막곡률반경, 각막굴절력, 안축장, 전방깊이, 수정체 두께를 측정하고 분석하였다. 결과: 안축장(AL)/각막곡률반경(CR) 비와 각막굴절력, 안축장, 전방깊이는 양의 상관관계를 보였고(r=0.510, r=0.439 r=0.411), AL/CR 비와 각막곡률반경과는 음의 상관관계를 나타냈다(r = -0.516). 각 막굴절력과 안축장 사이에서 가장 높은 연관성(r = -0.545, p=0.000)을 보였으며 굴절이상과 AL/CR 비는 음의 상관관계로 분석되었다(r = -0.359). 결론: 눈의 굴절이상을 진단하는데 AL/CR 비가 고령의 성인에서 중요한 지표자료임을 알 수 있었다.

• 대한토목학회논문집
• /
• 제33권6호
• /
• pp.2411-2425
• /
• 2013

퇴적층과 암반층이 층상구조로 되어있는 지반의 층상암반층 위에 말뚝기초를 설계할 경우, 연직하중에 대한 지지암반의 파괴모드(휨파괴, 펀칭전단파괴 혹은 선단지지파괴)를 검토하고 지지력을 계산하기 위해서는 층상지지암반층의 구조해석이 필요하다. 그러나 ACI committee 436과 우리나라 구조물기초설계기준에서 제안하고 있는 기존의 이용 가능한 탄성평판해석법(Elastic Plate Analysis Method)은 매우 복잡하여 기술자가 이용하는데 어려움이 많다. 따라서 본 연구에서는 복잡한 탄성평판해석법 대신 비교적 간단한 원형기초해석법(Circular Foundation Analysis Method)을 이용할 수 있도록 등가유효폭(반경)의 개념과 식을 제시하였고, 이를 통하여 탄성평판해석에 의한 모멘트와 전단력이 원형평판해석의 결과와 같도록 관계식을 제안하였다. 그 결과 등가유효폭을 이용한 원형기초해석의 방법은 매우 단순하고 편리하였고, 제안된 방법에 의한 결과를 탄성평판해석과 유한요소해석 결과와 비교한 결과 매우 잘 일치하였다.

• Journal of the Optical Society of Korea
• /
• 제8권2호
• /
• pp.83-89
• /
• 2004

A variable optical attenuator with a bending-sensitive fiber (BSF) that can be used in optical networks is developed. The refractive index profile of the BSF is divided into four regions which are inner core, center dip of inner core, outer core and clad. The 3-dimensional finite difference beam propagation method (3D FD-BPM) is utilized to find the characteristics of the BSF, so the mode profile of the BSF and optical power attenuation according to the bending are investigated, and the equivalent model of the BSF is made. By using this equivalent model of the BSF, the BSF is fabricated, and the refractive index profile of the BSF is measured, which is similar to refractive index profile of the proposed BSF. The fabricated variable optical fiber attenuator (VOFA) consists of the BSF in a rectangular rubber ring with a fixed bend radius (BR) in a steady state. The VOFA using the proposed BSF was able to attenuate the optical power by more than about －38 ㏈ at certain wavelengths (1540∼1560 nm) based on adjusting the mechanical pressure applied to the upper surface of the rectangular rubber ring with the bent BSF. In addition, the proposed VOFA produced an insertion loss of 0.68 ㏈, polarization dependent loss (PDL) of about 0.5 ㏈, and return loss of less than －60 ㏈.

• 한국정보통신학회논문지
• /
• 제4권5호
• /
• pp.971-976
• /
• 2000

The main objective of this paper is to present the rain cell size distribution observed during squall line episodes in the Sudano-Sahelian region. The used data were collected during the EPSAT Program [Etude des Precipitation par SATellite (Satellites Study of Precipitation)] which has been developed since 1958, on an experimental area located near Niamey, Niger (2 10′32"E, 13 28′38"N). The data were obtained with a C-band radar and a network composed of approximately 100 raingages over a 10,000 $\textrm{km}^2$. In this work a culling of the squall line episodes was made for the 1992 rainy season. After radar data calibration using the raingage network a number of PPI (Plan Position Indicator) images were generated. Each image was then treated in order to obtain a series of radar reflectivity (Z) maps. To describe the cell distribution, a contouring program was used to analyze the areas with rain rate greater than or equal to the contour threshold (R$\geq$$\tau$). 24700 contours were generated, where each iso-pleth belongs to a predefined threshold. Computing each cell surface and relating its area to an equi-circle (a circle having the same area as the cell), a statistical analysis was made. The results show that the number of rain cells having a given size is an inverse exponential function of the equivalent radius. The average and median equivalent radii ate 1.4 and 0.69 In respectively. Implications of these results for the precipitation estimation using threshold methods are discussed.