• Journal of Ginseng Research
• /
• 제40권3호
• /
• pp.292-299
• /
• 2016

Background: We previously reported that two-phase partition chromatography between ginseng water extract and soybean oil efficiently eliminated pesticide residues. However, an undesirable odor and an unpalatable taste unique to soybean oil were two major disadvantages of the method. This study was carried out to find an alternative vegetable oil that is cost effective, labor effective, and efficient without leaving an undesirable taste and smell. Methods: We employed six vegetable oils that were available at a grocery store. A 1-mL sample of the corresponding oil containing a total of 32 pesticides, representing four categories, was mixed with 10% aqueous ginseng extract (20 mL) and equivalent vegetable oil (7 mL) in Falcon tubes. The final concentration of the pesticides in the mixture (28 mL) was adjusted to approximately 2 ppm. In addition, pesticides for spiking were clustered depending on the analytical equipment (GC/HPLC), detection mode (electron capture detector/nitrogen-phosphorus detector), or retention time used. Samples were harvested and subjected to quantitative analysis of the pesticides. Results: Soybean oil demonstrated the highest efficiency in partitioning pesticide residues in the ginseng extract to the oil phase. However, canola oil gave the best result in an organoleptic test due to the lack of undesirable odor and unpalatable taste. Furthermore, the qualitative and quantitative changes of ginsenosides evaluated by TLC and HPLC, respectively, revealed no notable change before or after canola oil treatment. Conclusion: We suggest that canola oil is an excellent vehicle with respect to its organoleptic property, cost-effectiveness and efficiency of eliminating pesticide residues in ginseng extract.

• 한국광학회지
• /
• 제16권3호
• /
• pp.266-274
• /
• 2005

본 논문에서는 2차원 광결정 공진기의 결합을 통해 WDM시스템에 적합한 특성을 가지는 공진 필터를 설계하였다. 공진기간의 결합에 있어서 고려해야 할 요소를 시영역에서의 모드 결합이론(coupling modes in time)을 적용하여 이론적으로 분석하였으며, 전자회로 등가화를 이용하여 쉽게 그 요소를 결정할 수 있음을 보였다. 공진기 결합에 있어서 공진기 간의 간격에 따른 위상천이에 대해서 외부감쇄에 의한 Q-factor를 조정함으로써 보상할 수 있음을 확인하였고, 2차원 광결정 점결함 공진기를 이용하여 500GHz의 대역폭을 가지며 통과대역에서 0.5 dB 리플을 가지는 3차 Chebyshev 대역 통과 필터를 설계하였다.

• 대한조선학회지
• /
• 제13권1호
• /
• pp.1-9
• /
• 1976

Using the computer programs for calculation of natural vibrations of ship's hull developed by the authors et al., an investigation into influences of various parameters on the accuracy of calculation was done through example calculations of a 30,000 DWT petroleum products carrier M/S Sweet Brier built by Korea Shipbuilding and Engineering Corporation. The methodical principles employed for the computer program development are as follows; (a) the ship system is reduced to an equivalent discrete elements system conforming to Myklestad-Prohl model, (b) the problem formulation is of transfer matrix method, and (c) to obtain solutions an extended $G\ddot{u}mbel's$ initial value method is introduced. The scope of the investigation is influences of number of discrete elements, choice of significant system parameters such as rotary inertia, bending stiffness and shear stiffness, and simplification of distributions of added mass and stiffness as trapezoidal ones referred to those of midship section on the calculation accuracy. From the investigation the followings are found out; (1) To obtain good results for the modes up to the seven-noded thirty or more divisions of the hull is desirable. For fundamental mode fifteen divisions may give fairly good results. (2) The influence of rotary inertia is negligibly small at least for the modes up to the 5- or 6- noded. (3) In the case of assuming either bending modes or shear modes the calculation results in considerably higher frequencies as compared with those based on Timoshenko beam theory. However, the calculation base on the slender beam theory surprisingly gives frequencies within 10% error for fundamental modes. (4) It is proved that to simplify distributions of added mass and stiffness as trapezoidal ones referred to those of midship section is a promising approach for the prediction of natural frequencies at preliminary design stage; provided good accumulation of data from similar type ships, we may expect to obtain natural frequencies within 5% error.

• 한국가스학회지
• /
• 제11권4호
• /
• pp.54-58
• /
• 2007

본 연구에서는 13L급 전자제어식 디젤 엔진을 혼소 엔진으로 개조하여 얻은 결과를 다루고 있다. 혼소 엔진 개조 후 차량의 출력, 연료경제성, 운전성 등을 파악하기 위하여 일정한 경로의 고속도로를 주행하였다. 개조된 차량은 최대 85%의 대체율을 가지며 500 km의 거리를 혼소 모드로 주행하였다. 차량의 주행성능은 디젤 모드의 경우와 거의 동일하였으나, 추월 가속성능이 약간 떨어지는 경향이 있었다. 엔진의 최대출력, 열효율, 배기가스 측정을 위하여 차량 시험과는 별도로 엔진 시험도 동시에 수행하였다. ND-13모드에서 배출가스 배출량 측정 실험을 수행한 결과, 산화촉매를 장착한 혼소모드에서의 배출가스 배출량은 디젤모드에서와 출력은 동일하게 유지하면서 K2006 규제를 만족함을 알 수 있었다.

• 한국전산구조공학회논문집
• /
• 제27권6호
• /
• pp.501-508
• /
• 2014

본 논문에서는 질점계 비선형 지진응답해석을 통한 역량스펙트럼 도출방법을 소개한다. 일반적인 건축물의 손상도 평가는 비선형 등가정적해석(Push-over Analysis)을 통하여 건축물의 역량스펙트럼을 도출하고, 역량스펙트럼과 요구스펙트럼의 교차점을 성능점으로 평가하고 있다. 등가정적해석은 지진의 영향을 등가의 정적하중으로 환산한 후 이를 이용하여 정적해석을 수행함으로써 구조물의 지진에 의한 거동을 예측하는 방법이다. 이 방법은 고차모드 및 층별 동특성의 영향을 고려할 수 없다. 따라서 건축물의 동특성이 반영된 역량스펙트럼을 산출하기 위하여 질점계 비선형 지진응답해석을 진행하여 건축물의 역량 스펙트럼을 제안하고자 한다.

• Structural Engineering and Mechanics
• /
• 제63권5호
• /
• pp.617-628
• /
• 2017

In order to study the failure mode and seismic behavior of the interior-joint in steel traditional-style buildings, a single beam-column joint and a double beam-column joint were produced according to the relevant building criterion of ancient architectural buildings and the engineering instances, and the dynamic horizontal loading test was conducted by controlling the displacement of the column top and the peak acceleration of the actuator. The failure process of the specimens was observed, the bearing capacity, ductility, energy dissipation capacity, strength and stiffness degradation of the specimens were analyzed by the load-displacement hysteresis curve and backbone curve. The results show that the beam end plastic hinge area deformed obviously during the loading process, and tearing fracture of the base metal at top and bottom flange of beam occurred. The hysteresis curves of the specimens are both spindle-shaped and plump. The ultimate loads of the single beam-column joint and double beam-column joint are 48.65 kN and 70.60 kN respectively, and the equivalent viscous damping coefficients are more than 0.2 when destroyed, which shows the two specimens have great energy dissipation capacity. In addition, the stiffness, bearing capacity and energy dissipation capacity of the double beam-column joint are significantly better than that of the single beam-column joint. The ductility coefficients of the single beam-column joint and double beam-column joint are 1.81 and 1.92, respectively. The cracks grow fast when subjected to dynamic loading, and the strength and stiffness degradation is also degenerated quickly.

• 한국전산구조공학회논문집
• /
• 제27권4호
• /
• pp.255-263
• /
• 2014

본 연구에서 피뢰기의 지진취약도 해석은 역량스펙트럼 방법을 이용하여 수행하였다. 많은 구조부재를 가진 구조물의 지진취약도 해석은 수십 혹은 수백 개의 지진하중에 대한 비탄성 지진응답을 계산하는 것이 요구되기 때문에 역량스펙트럼 방법과 같은 간단한 방법이 응답이력해석 보다 적합하다. 일반적으로 역량스펙트럼 방법에 의해 평가된 지진응답의 정확성은 응답이력해석에 의한 결과의 정확성 보다 떨어진다. 역량스펙트럼 방법의 정확성을 향상시키기 위하여 등가단자유도 방법과 성능점 계산기법이 적용되었다. 지진취약도에 대한 지진에 대한 지반효과를 평가하기 위하여 60개의 다른 지반종류의 지반운동을 입력지진으로 선정하여 사용하였다. 역량스펙트럼 방법과 응답이력해석에 의한 지진취약도 곡선의 비교로부터 역량스펙트럼 방법에 의한 지진취약도 곡선이 응답이력해석에 의한 지진취약도 곡선과 상당히 유사함을 알 수 있었다. 또한, 피뢰기의 주된 지진에 의한 파괴모드는 부싱의 파손임을 알 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제2권1호
• /
• pp.89-97
• /
• 2007

This paper presents a new circuit topology of active edge resonant snubbers assisted half-bridge soft switching PWM inverter type DC-DC high power converter for DC bus feeding power plants. The proposed DC-DC power converter is composed of a typical voltage source-fed half-bridge high frequency PWM inverter with a high frequency planar transformer link in addition to input DC busline side power semiconductor switching devices for PWM control scheme and parallel capacitive lossless snubbers. The operating principle of the new DC-DC converter treated here is described by using switching mode equivalent circuits, together with its unique features. All the active power switches in the half-bridge arms and input DC buslines can achieve ZCS turn-on and ZVS turn-off commutation transitions. The total turn-off switching losses of the power switches can be significantly reduced. As a result, a high switching frequency IGBTs can be actually selected in the frequency range of 60 kHz under the principle of soft switching. The performance evaluations of the experimental setup are illustrated practically. The effectiveness of this new converter topology is proved for such low voltage and large current DC-DC power supplies as DC bus feeding from a practical point of view.

• 한국안전학회지
• /
• 제29권4호
• /
• pp.9-14
• /
• 2014

Self-piercing riveting(SPR) is a mechanical fastening technique which is put pressure on the rivet for joining the sheets. Unlike a spot welding, SPR joining does not make the harmful gas and $CO_2$ and needs less energy consumption. In this study, static and fatigue tests were conducted using tensile-shear specimens with Al-5052 plates for evaluation of fatigue strength of the SPR joints. During SPR joining process for the specimen, using the current sheet thickness and a rivet, the optimal applied punching force was found to be 21 kN. And, the maximum static strength of the specimen produced at the optimal punching force was 3430 N. During the fatigue tests for the specimens, interface failure mode occurred on the top substrate close to the rivet head in the most high-loading range region, but on the bottom substrate close to the rivet tail in the low -loading range region. There was a relationship between applied load amplitude $P_{amp}$ and lifetime of cycle N for the tensile-shear, $P_{amp}=3395.5{\times}N^{-0.078}$. Using the stress-strain curve of the Al-5052 from tensile test, the simulations for fatigue specimens have been carried out using the implicit finite element code ABAQUS. The relation between von-Mises equivalent stress amplitude and number of cycles was found to be ${\sigma}_{eq}=514.7{\times}N^{-0.033}$.

• 한국인쇄학회지
• /
• 제26권2호
• /
• pp.65-77
• /
• 2008

The color reproduction of digital still camera does not, in general, match those of the final prints. Because color gamut of these devices is different, it is therefore necessary to take account of a way to match. The way uses the optimized profile to print an image. This paper proposed a way to create the input profile of digital still camera for standardization printing process. The results of proposed way showed that for input profiles equivalent, good results relatively. In this paper, an experiment was done where the illumination sources used as the standard illumination 5200K and illuminated at a $45^{\circ}$ angle in the best illumination efficiently. The white balance was in mode 'custom': aperture F11, exposure time 1/60s, ISO50, focal length 80mm. The images were exported and saved as 16bit RGB tiff(AdobeRGB, sRGB, ProphotoRGB) images. To do the test, the RGB values of the RGB tiff images are processed through the ICC input profile to arrive at processed $CIEL^*a^*b^*$ values. A profiling tool such as ProfileMaker 5.0 and Monacoprofile 4.8 are used to do this. The processed CIEL*a*b* values are compared to the reference CIEL*a*b* values and these two values are used to calculate a ${\Delta}E$.