• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.543-546
• /
• 2004

Bias and frequency-dependent impedance is a technique for the investigation of complex conductivity. At low frequency, complex impedance is dominated by resistive component, and at high frequency by capacitive component. We are going to present the results of the bias and frequency-dependent complex impedance in the device structure of $ITO/Alq_3/Al$ in the temperature range between 10K and 300k. And we will show to change radius of Cole-Cole plot. It will be decrease resistance by temperature. Also equivalent electrical circuit and dielectric relaxation can be accomplished by using the complex impedance analysis.

• 한국전자파학회논문지
• /
• 제14권12호
• /
• pp.1264-1268
• /
• 2003

본 논문에서는 밀리미터파 대역에서 NRD guide를 이용한 듀플렉서를 설계하였다. 설계된 듀플렉서는 두개의 stepped-impedance 필터와 한 개의 T-Junction으로 구성되어 있다. 차단영역 도파관 등가회로를 이용하여 stepped-impedance 필터를 설계하였고, T-Junction은 반사손실을 -20 dB 이하로 최적화하였다. 듀플렉서를 제작하여 측정한 결과 응답특성이 시뮬레이션 결과와 일치함을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2345-2347
• /
• 2005

In this paper, impedance characteristics of overhead medium-voltage (MV) power lines is reported for power line communication (PLC) over an MV power line network. For analysis, a two-port equivalent network model of MV power lines is derived. By applying the transmission line theory, reflection behavior and impedance of power lines are investigated. For verification, impedance of power lines is measured at a test field for an MV PLC. The results show that impedance of MV power lines is between $200{\Omega}$ and $300{\Omega}$ and converges to a half of their characteristic impedance.

• 조명전기설비학회논문지
• /
• 제18권4호
• /
• pp.60-67
• /
• 2004

비선형 부하의 증가로 3상 4선식 배전계통을 채용하는 중성선에는 많은 중성선 고조파 전류가 관측되고 있다. 또한 접지 임피던스는 고주파가 있는 중성선 전류에 영향 끼친다고 알려져 있다. 현장에서 실측한 고조파 전압과 전류, 그리고 대지 고유 저항률과 접지 저항을 토대로 고조파 해석용 등가 회로를 구성하였다. MATLAB과 CDEGS 프로그램으로 시뮬레이션 하여 수치와 파형으로 적절한 결과를 도출하였다.

• Journal of Power Electronics
• /
• 제13권6호
• /
• pp.1008-1015
• /
• 2013

By using fractional calculus and the circuit-averaging technique, the modeling and analysis of a Buck converter with fractional order inductor and fractional order capacitor in discontinuous conduction mode (DCM) operations is investigated in this study. The equivalent averaged circuit model of the fractional order Buck converter in DCM operations is established. DC analysis is conducted by using the derived DC equivalent circuit model. The transfer functions from the input voltage to the output voltage, the duty cycle to the output voltage, the input impedance, and the output impedance of the fractional order Buck converter in DCM operations are derived from the corresponding AC-equivalent circuit model. Results show that the DC equilibrium point, voltage ratio, and all derived transfer functions of the fractional order Buck converter in DCM operations are affected by the inductor order and/or capacitor order. The fractional order inductor and fractional order capacitor are designed, and PSIM simulations are performed to confirm the correctness of the derivations and theoretical analysis.

• 전력전자학회논문지
• /
• 제26권3호
• /
• pp.167-175
• /
• 2021

Reusing electric vehicle batteries after they have been retired from mobile applications is considered a feasible solution to reduce the demand for new material and electric vehicle costs. However, the evaluation of the value and the performance of second-life batteries remain a problem that should be solved for the successful application of such batteries. The present work aims to estimate the remaining useful life of Li-ion batteries through the neuro-fuzzy system with the equivalent circuit parameters obtained by Electrochemical Impedance Spectroscopy (EIS). To obtain the impedance spectra of the Li-ion battery over the life, a 18650 cylindrical cell has been aged by 1035 charge/discharge cycles. Moreover, the capacity and the parameters of the equivalent circuit of a Li-ion battery have been recorded. Then, the data are used to establish a neuro-fuzzy system to estimate the remaining useful life of the battery. The experimental results show that the developed algorithm can estimate the remaining capacity of the battery with an RMSE error of 0.841%.

• 마이크로전자및패키징학회지
• /
• 제13권4호
• /
• pp.9-15
• /
• 2006

이 논문은 코어와 I/O 회로가 포함된 PEEC(Partial Equivalent Electrical Circuit) PDN(Power Distribution Networks)의 임피던스 변화에 따른 칩의 성능 분석을 나타내었다. I/O 전원에 연결된 코어 전원 잡음이 I/O 스위칭에 어떠한 영향이 미치는지 시뮬레이션 결과를 통하여 보였다. 또한 직접 설계한 $7{\times}5$인치 DLL(Delay Locked Loop)시험 보드를 사용하여 칩의 동작 지점에 따른 전원 잡음의 효과를 분석하였다. $50{\sim}400MHz$에 주파수 대역에 따른 DLL의 지터를 측정하고 시뮬레이션 결과로 얻어진 임피던스 값과 비교하였다. PDN의 공진 피크가 100MHz 주파수에서 1옴보다 큰 임피던스를 갖기 때문에 DLL의 지터는 주파수가 100MHz 근처에서 증가함을 보여준다. 타겟 임피던스를 줄이기 위한 방법인 디커플링 커패시터에 따른 칩과 보드의 임피던스 변화를 보였다. 따라서 전원 공급망 설계는 디커플링 커패시터와 함께 코어 스위칭 전류와 I/O 스위칭 전류를 같이 고려해야 한다.

• 전기학회논문지
• /
• 제62권10호
• /
• pp.1458-1464
• /
• 2013

This paper proposed a new real time catenary impedance estimation technique using synchronized power data from the measured data of operating vehicle and substation for catenary protective relay and fault locator setting. This paper presented estimation equation of catenary impedance using synchronized power data between substation and vehicle of AT feeding system for the performance verification of the proposed technique. Also AC feeding system is modeled through power analysis program and performance was verified through simulation according to various load changes. We verified that average 2.38%(distance equivalent 23.8 m) error appeared between the proposed estimation equation of catenary impedance and power analysis program simulation output in no connection double track system between up track and down track. Furthermore, We confirmed that estimation error is bigger depending on the increasing the distance from substation and vehicle impedance using only using vehicle current when calculating vehicle impedance in connection double track system between up track and down track. But, We confirmed that the proposed technique estimated accurately catenary impedance regardless of vehicle impedance and distance from substation.

• 한국멀티미디어학회논문지
• /
• 제20권3호
• /
• pp.482-490
• /
• 2017

Early detection of infiltration is one of the most important tasks of nurses to minimize skin damage due to infiltration. For subjects receiving invasive intravenous treatment, the bioelectrical impedance (impedance) were measured in the frequency range of 5 to 500 kHz using bioelectrical impedance spectroscopy (BIS). After attaching electrodes at both ends of a transparent dressing mounted on the skin in which IV solution was infused into the vein, the change in impedance was measured as a function of time and frequency before and after infiltration. The experimental results are described as follows. When IV solution was properly infused into the vein, the impedance was nearly constant over time and decreased with increasing frequency. However, when infiltration occurred, the impedance decreased significantly and thereafter gradually decreased with time. In addition, impedance decreased with time for all applied frequencies. In this study, when IV solution penetrated into the surrounding skin and subcutaneous tissue by infiltration, impedance was quantitatively analyzed for as a function of time and frequency. This suggests a method for early detection of infiltration using BIS.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1876-1878
• /
• 2004

A systematic approach of measurement, modeling and analysis of grounding system impedance is presented. The measurement and analysis system of ground impedance is based on a computer aided technique. The ground impedances of the ground rod are considerably dependent on the frequency. The ground impedance is mainly resistive in the frequency range of 3-20 kHz. At higher frequencies, the reactive components of the ground impedances are no longer negligible and the inductance of the ground rod was found to be the core factor deciding the ground impedance. As a consequence, the equivalent circuit model based on the measured data was proposed, and the calculated results were in approximately agreement with the measured data.