• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권11호
• /
• pp.720-728
• /
• 2000

This paper describes the calculation of the equivalent circuit parameters and the characteristic analysis of a capacitor-run type single-phase induction motor by means of the finite element method in coupled with the conventional equivalent circuit model. The circuit parameters of the stator are calculated form the lumped parameter and the slot leakage reactance of the rotor with the closed slot can be obtained by the use of slot pitch boundary condition. From the analysis result this combined equivalent circuit and finite element method which is used slot pitch boundary condition is compared with the experimental results, the validity of the method is proved.

• Transactions on Electrical and Electronic Materials
• /
• 제17권6호
• /
• pp.311-316
• /
• 2016

Batteries are critical components of electric vehicles and energy storage systems. The connection of a battery to the power grid for charge and discharge greatly affects energy storage. Therefore, an accurate and easy-to-observe battery model should be established to achieve systematic design, simulation, and SOC (state of charge) estimations. In this review, several equivalent circuit models of representative significance are explained, and their respective advantages and disadvantages are compared to determine and outline their reasonable applications to Li-ion batteries. Numerous commonly used model parameter identification principles are summarized as well, and basic model verification methods are briefly introduced for the convenient use of such models.

• 한국전자파학회논문지
• /
• 제29권9호
• /
• pp.677-684
• /
• 2018

본 연구는 S-parameter를 이용한 변압기의 고주파 모델링 방법을 제시한다. 1차측과 2차측을 단락 또는 개방 회로를 구성하여 각 상태에서의 반사계수를 Vector Network Analyzer로 측정하였다. 측정 결과로부터 등가회로 소자를 추출하여 고주파 등가회로를 모델링하고, 2-port 회로에서 측정한 S-parameter 측정치와 시뮬레이션 결과를 비교함으로써 타당성을 검증하였다. 이는 정확하고 예측 가능한 고주파 변압기를 설계하는데 적용될 수 있다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권8호
• /
• pp.449-456
• /
• 2002

3D Equivalent magnetic Circuit Network Method (EMCNM) is comparatively the easy way that analyzes 3D models of Electric Machine by using permeance as a distributive magnetic circuit parameter under the existing magnetic equivalent circuit method and Numerical Method. The existing 3D EMCNM could not correctly describe the shape of an analysis target when using rectangular shape element or fan shape element, so it made errors when calculating permeance. Therefore, this paper proposes the trapezoidal element contained rectangular element, fan-shape element, and quadrilateral element to express a shape. The proposed method in this research was confirmed as a useful and an accurate method through comparing with the analysis result of SRM model that is sufficiently guaranteed by 2D-Analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.96-98
• /
• 2001

In this paper, the equivalent magnetic circuit and FEM are used to calculate force density of linear BLDC motor. The equivalent magnetic circuit is hard to exact compose for analysis model and it is just applied to linear system. To flexible design and reducing the calculated and analyzed time, magnetic circuit has to be used for designing the linear BLDC motor and deducing equation of force density. Force density as parameter of permanent magnet and coil-side width that are important to determined force density can be estimated using equation of force density. FEM is used to prove reliability of equation of force density and to consider the nonlinear system. Equivalent magnetic circuit and result of FEM are similar, but it is little different by friction loss at the experiment.

• 한국전자통신학회논문지
• /
• 제9권10호
• /
• pp.1175-1180
• /
• 2014

본 논문에서는 발진기의 위상잡음을 개선하고 MMIC(Monolithic Microwave Integrated Circuit)에 적용 가능하도록 설계된 분리된 링형 DGS(Defected Ground Structure)공진기를 제안한다. 이것은 평면형 공진기로서 소형화 설계가 용이하고 상대적으로 높은 Q 값을 갖는다. 공진기를 이용하여 초고주파 발진기를 설계할 때 공진기의 등가 파라미터를 모델링하는 것이 필요하다. 본 논문에서는 발진기의 설계에 필요한 공진기의 등가회로 파라미터를 공진기의 측정된 특성 값으로부터 수식적으로 계산하는 방법을 나타내었다. 방법을 검증하기 위해 공진주파수가 5.8 GHz인 링형 DGS 공진기를 제작하여 특성을 측정하고 등가 파라미터를 계산하였고, 이 결과를 ADS 도구를 이용하여 시뮬레이션한 결과와 비교하여 일치함을 보였다.

• 대한전자공학회논문지SD
• /
• 제41권12호
• /
• pp.21-26
• /
• 2004

본 논문에서는 package된 BJT의 RF 등가회로 모델을 optimization과정 없이 직접 추출하는 방법을 개발하였다. 먼저, open 과 short package 구조를 사용하여 plastic package의 기생성분을 측정된 S-파라미터로부터 정확히 제거하였다. 이와 같이 package do-embedding된 S-파라미터로부터 package lead와 chip pad 사이의 bonding wire 인덕턴스와 chip pad 캐패시턴스를 직접 추출하는 간단한 방법을 구축하였다. 그 후에 내부 BJT소자의 소신호 모델변수들은 RF 등가회로로부터 유도된 Z나 Y-파라미터 방정식을 이용하여 결정하였다. 이 방법으로 모델화된 packaged BJT의 S-파라미터는 측정 데이터와 아주 잘 일치하였으며 이는 새로운 추출방법의 정확성을 증명한다.

• 전기학회논문지
• /
• 제66권4호
• /
• pp.629-635
• /
• 2017

Free-Flooded Ring (FFR) transducer array for use in Sonar system can be driven with large amplitude in a wide frequency band due to its structural characteristics, in which two resonances of a ring mode (1st radial mode) and an inner cavity vibration mode occur in a low frequency band. Since its sound wave generation characteristics are not influenced by the water pressure, the FFR transducer array is widely used in the deep sea. So FFR has been recognized as a low-frequency active sound source and has received much attention ever since. In order to utilize the FFR transducer array for SONAR systems in military and industrial applications, its equivalent electric circuit model is necessary especially to design the matching circuit between the driving power amplifier and the FFR transducer array. Thus this paper proposes the equivalent electric circuit model of FFR transducer array by using measured values of parameter, and suggest the improved method of parameter identification. Finally it verifies the effectiveness of the proposed circuit model of FFR transducer array by experimental measurements.

• 전기의세계
• /
• 제31권2호
• /
• pp.126-131
• /
• 1982

Induction motors are known to cause voltage dip, oscillating torque and inrush current on the dynamic period. To compensate for these undesirable effects, the prediction of dynamic performances is required. The dynamic performances are determinated by circuit time constants. From this point of view, in this paper, the dynamic equivalent circuit included only three time-constant parameters are presented. To predict more simply dynamic performances, the new characteristics time constant parameters are analyzed, and now these parameters are described as the function of circuit time constants. This paper reviews and analyzes the use of series capacitance compensations, and the use of this analysis can make simply a prediction about oscillating conditions.

• 한국산업정보학회논문지
• /
• 제6권3호
• /
• pp.123-127
• /
• 2001

CMOS 트랜지스터의 등가회로모델 파라미터 $C_{gs}$ 의 예측방법이 CMOS 트랜지스의 반전층내의 유동전하량 계산과 전하유도 특성에 의해 제안되었다. 이 $C_{gs}$ 파라미터는 MOS 트랜지스터의 RF대역의 차단주파수를 결정하고 또한 입력과 출력을 커플링 시키는 중요한 파라미터이다. 이 제안된 방법은 등가회로 모델에서 파라미터 값을 예측하고 파라미터 값을 추출하는 소프트웨어 개발에 기여할 것이다.