• 소성∙가공
• /
• 제19권3호
• /
• pp.185-190
• /
• 2010

Application of CAE analyses are wide spread in shaping processes and structural safety verification of plastic products. The importance of CAE analysis and its contributions are getting increase since the processibility and structural safety of product can be predicted. CAE analysis for complex shaped product need a lot of time for modeling and computation compare with simpler one. Therefore careful simulation modeling is required for complex shaped product. Structural analysis for plastic door handle of automobile has been performed and structural safety has been investigated for various load directions and modeling cases. Large stress occurred at the hinge in handle regardless of load direction and modeling case. Consequently hinge is considered structurally very weak among the parts in plastic door handle. It is concluded that simple modeling rather than total modeling with adequate boundary condition equivalent to real situation gives reasonable computational results with saving modeling effort and computation time.

• Kyungpook Mathematical Journal
• /
• 제63권3호
• /
• pp.437-450
• /
• 2023

In this paper, we present a sufficient condition for the unique existence of solutions for a coupled system of nonlinear fractional Langevin equations with a new class of multipoint and nonlocal integral boundary conditions. We define a 𝓩^*_λ-contraction mapping and present the sufficient condition by identifying the problem with an equivalent fixed point problem in the context of b-metric spaces. Finally, some numerical examples are given to validate our main results.

• 대한기계학회논문집B
• /
• 제23권2호
• /
• pp.243-253
• /
• 1999

The dual reciprocity boundary element method (DRBEM) is used to solve the Graetz problem of laminar flow inside circular duct. In this method the domain integral tenn of boundary integral equation resulting from source term of governing equation is transformed into equivalent boundary-only integrals by using the radial basis interpolation function, and therefore complicate domain discretization procedure Is completely removed. Velocity profile is obtained by solving the momentum equation first and then, using this velocities as Input data, energy equation Is solved to get the temperature profile by advancing from duct entrance through the axial direction marching scheme. DRBEM solution is tested for the uniform temperature and heat flux boundary condition cases. Local Nusselt number, mixed mean temperature and temperature profile inside duct at each dimensionless axial location are obtained and compared with exact solutions for the accuracy test Solutions arc in good agreement at the entry region as well as fully developed region of circular duct, and their accuracy are verified from error analysis.

• Steel and Composite Structures
• /
• 제38권3호
• /
• pp.281-291
• /
• 2021

An equivalent single-layer theory (EST) is put forward for analyzing free vibrations of steel-concrete composite beams (SCCB) based on a higher-order beam theory. In the EST, the effect of partial interaction between sub-beams and the transverse shear deformation are taken into account. After using the interlaminar shear force continuity condition and the shear stress free conditions at the top and bottom surface, the displacement function of the EST does not contain the first derivatives of transverse displacement. Therefore, the C0 interpolation functions are just demanded during its finite element implementation. Finally, the EST is validated by comparing the results of two simply-supported steel-concrete composite beams which are tested in laboratory and calculated by ANSYS software. Then, the influencing factors for free vibrations of SCCB are analyzed, such as, different boundary conditions, depth to span ratio, high-order shear terms, and interfacial shear connector stiffness.

• 항공우주기술
• /
• 제12권2호
• /
• pp.48-56
• /
• 2013

본 연구에서는 다양한 균질화 기법을 통해 섬유강화 복합재료 단일 적층판의 등가탄성계수를 예측을 수행하였다. 섬유강화 복합재료의 등가 탄성계수를 예측하는 해석식 및 준실험식 등 많은 기법들이 제안되어 왔지만 사용대상에 따라 제약이 있거나, 복합재료를 구성하는 섬유나 기지의 종류에 따라 예측결과가 시험결과와 잘 일치하지 않는 문제점을 가지고 있다. 본 연구에서 전산 균질화 기법을 통해 실제 복합재료 형상과 유사한 대표체적 요소를 선정하여 유한요소 모델링을 수행하고, 주기적 경계조건을 부여하여 등가 탄성계수를 예측하였다. 아울러 기존의 예측식 및 시험 결과와 비교하여 그 성능을 검증하였으며, 인공위성 복합재료 패널 구조해석결과에 미치는 영향에 대해 검토하였다.

• 한국전자파학회논문지
• /
• 제25권10호
• /
• pp.1087-1094
• /
• 2014

본 연구에서는 유전체의 산란 특성 분석을 위해 이용되는 CFIE(Combined Field Integral Equation) 모멘트법의 계산효율을 높이기 위해 임피던스 경계면 조건을 적용시킨 수치해석 기법과 그 적용 범위에 대한 분석결과를 제시한다. 임피던스 경계면의 적용은 유전체의 등가 표면 전류(Js)와 등가 표면 자류(Ms)를 하나의 전류 또는 자류 성분으로 표현할 수 있으며, 임피던스 경계면 조건을 적용해 계산효율을 높인 수치해석 기법의 정확도는 기존의 CFIE 모멘트법과 이론값(Mie-series 해법, Small Perturbation 산란모델)을 이용하여 비교/분석하였다. 임피던스 경계면 조건을 적용한 수치해석 기법의 적용 범위 상대유전율 허수부 12 이상에서 1 dB 이내의 계산 편차를 확인하였다.

• 한국음향학회지
• /
• 제25권5호
• /
• pp.229-238
• /
• 2006

본 논문에서는 수치 영역의 포물선 지배 방정식의 근사 차수와 수치 영역 경계의 비국소적 경계 조건의 근사 차수가 서로 다를 때 음파 해에 미치는 영향을 해석적으로 보였다. 우선 평면파 분석법을 이용해 비국소적 경계 조건을 반 무한 매질 영역으로 변환했다. 그리고 실제 수치 영역과 반 무한 매질 영역의 경계에서 해석적 반사 오차를 유도했다. 지배 방정식과 비국소적 경계 조건의 해석적 오차가 간단한 대수 식으로 표현 가능한 경우에 대해서는 대수적인 오차식을 유도하고 그 경향을 고찰했다. 지배 방정식이 일반적인 고차 포물선 방정식일 때는 대수적인 오차 식은 보다 복잡하게 표현되며 수치적 방법을 이용해 그 특성을 고찰했다. 최종적으로 지배 방정식의 차수에 따른 비국소적 경계 조건의 정밀도를 유도하고 해석적 반사 오차의 전반적인 특성에 대해 논의했다. 본 연구의 핵심 공헌은 포물선 방정식과 비국소적 경계 조건의 근사 차수가 다를 때 해석적 오차 추정 방법과 사용한계를 제시했다는데 있다.

• 대한조선학회논문집
• /
• 제45권1호
• /
• pp.93-100
• /
• 2008

There are two ways of conventional thermal distortion analysis. One is the thermal elasto-plastic analysis and the other is the equivalent forces method based on inherent strain. The former needs exorbitant analysis time, while the latter cannot obtain results of stress field and it needs much time consumption with loads modeling on curved plates. Such faults in two methods have made difficulties in thermal distortion analysis of a large structure like ship hull. In order to solve them, new kind of thermal distortion analysis method was developed. We devised that the inherent strains was used as direct input factors in forms of boundary conditions. It was embodied by using thermal expansion coefficient in commercial code. We used the pre-calculated inherent strain as thermal expansion coefficient, and endowed nodes with imaginary temperatures. This method was already adopted at hull block welding distortion analysis which was considered as impossible, and gave productive results such as reduction of work time in the dry dock.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.53-57
• /
• 1989

Until now, method of equivalent circuit is generally used in analyzing the characteristic of the synchronous alternator. But this method can't apply when loads are connected to alternator. In this paper, we analyzed the load characteristic of the synchronous alternator with permanant magnet using 2-dimensional finite element method having voltage source. The loads of a alternator are battary and diodes which are used to rectify. also, we used half periodic boundary condition in the F.E.M calculation

• Ocean Systems Engineering
• /
• 제2권2호
• /
• pp.147-158
• /
• 2012

A time-domain simulation of a land-based Oscillating Water Column (OWC) with various irregular waves as a form of PM spectrum is performed by using a two-dimensional fully nonlinear numerical wave tank (NWT) based on the potential theory, mixed Eulerian-Lagrangian (MEL) approach, and boundary element method. The nonlinear free-surface condition inside the OWC chamber was specially devised to describe both the pneumatic effect of the time-varying pressure and the viscous energy loss due to water column motions. The quadratic models for pneumatic pressure and viscous loss are applied to the air and free surface inside the chamber, and their numerical results are compared with those with equivalent linear ones. Various wave spectra are applied to the OWC system to predict the efficiency of wave-energy take-off for various wave conditions. The cases of regular and irregular waves are also compared.