• 전자공학회논문지A
• /
• 제28A권9호
• /
• pp.680-684
• /
• 1991

The scattering problem of a transverse electric (TE) plane wave by strip grating with a dielectric slab over a ground plane is analyzed by the method of moments. By use of equivalence principle, surface magnetic current density on the shorted slot is expanded in a series of Chebyshev polynomial a satisfying the appropriate edge condition. Numerical results for reflection coefficient are obtained and compared with other available results. Our numerical results obtained from the present method are in good agreement with other result available in the literature.

• 한국콘텐츠학회논문지
• /
• 제4권2호
• /
• pp.28-35
• /
• 2004

안테나 복사 특성을 효율적으로 측정할 수 있는 근역장측정 방법의 개선을 논한다. 본 논문에서 직각좌표계에 바탕을 둔 원통주사법의 공식을 제안한다. 제안된 원통주사법 알고리즘을 미소 쌍극자 안테나의 정확한 해와 비교한다. 본 논문의 접근법이 대부분의 안테나 측정에 효과적임을 수치해석 결과에서 알 수 있다.

• 한국통신학회논문지
• /
• 제21권7호
• /
• pp.1842-1849
• /
• 1996

This paper presents a full-wave, moment method analysis of a Moreno directional coupler with tow crossed-slots between two crossed rectangular waveguides. the overall structure is divided into several rectangular waveguides and cavities by the use of the equivalence principle to the complex slot regions. this enables a simple and efficient analysis involving the well-known retangular waveguide/cavity Green's functions. For a numerically efficient simulation, the roof-top basis expansion and line testing is used and an acceleration technique is applied to the series summation in the Green's functions. The numerical results are compared with the measurements to verify the correctness of the present analysis.

• 대한전자공학회논문지
• /
• 제27권11호
• /
• pp.20-24
• /
• 1990

본 논문에서는 유전체 판상의 스트립 회절격자에 의한 TE 평면파의 산란문제에 관한 효율적인 수렴해를 제시하였다. 본 논문의 방법은 등가 원리에 따라서 단락된 슬롯 위에 놓여진 등가 자계 전류를 적절한 모서리 조건을 만족하는 Chebyshev 다항식의 급수로서 전개하는데 기초를 둔다. 본 논문의 정확도와 수렴 속도를 입증하기 위해 반사 계수와 투과 계수에 대한 수치적인 결과를 계산하여 다른 결과와 비교하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.31-34
• /
• 2006

이 논문에서는 선관통형 균열을 포함하는 정사각형 평판과 선관통형 균열이 연속체 손상이론을 이용에서 구한 유효 직교 이방성 탄성 물성치의 등가 연속체 모델로 대체된 평판의 모드형상과 고유진동수를 비교하여 SEEP에 기반하여 Lee 등이 [5] 제안한 연속체 손상이론을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.78-81
• /
• 1987

The scattering characteristics are analysed for the dielectric cylinder with arbitrary cross section partially covered by thin conductors. The integro differential equations consistant with boundary conditions of conductor and dielectric boundaries are derived by the equivalence principle. They are transformed into matrix equations by moment method. The circular dielectric cylinder covered by conductors at the upper and bottom side of the cylinder is chosen for the numerical example. Current distributions on conductors and scattering cross section by the cylinder are computed for incident wave perpendicular to the conductor plane.

• Structural Engineering and Mechanics
• /
• 제70권3호
• /
• pp.367-380
• /
• 2019

The paper concerns topology and geometry optimization of statically determinate beams with arbitrary number of supports. The optimization problem is treated as a bi-criteria one, with the objectives of minimizing the absolute maximum bending moment and the maximum deflection for a uniform gravity load. The problem is formulated and solved using the Pareto optimality concept and the lexicographic ordering of the objectives. The non-dominated sorting genetic algorithm NSGA-II and the local search method are used for the optimization in the Pareto sense, whereas the genetic algorithm and the exhaustive search method for the lexicographic optimization. Trade-offs between objectives are examined and sets of Pareto-optimal solutions are provided for different topologies. Lexicographically optimal beams are found assuming that the maximum moment is a more important criterion. Exact formulas for locations and values of the maximum deflection are given for all lexicographically optimal beams of any topology and any number of supports. Topologies with lexicographically optimal geometries are classified into equivalence classes, and specific features of these classes are discussed. A qualitative principle of the division of topologies equivalent in terms of the maximum moment into topologies better and worse in terms of the maximum deflection is found.

• Steel and Composite Structures
• /
• 제24권5호
• /
• pp.549-559
• /
• 2017

As few multi-tower single-box multi-cell cable-stayed bridges with corrugated steel webs have been built, analysis is mostly achieved by combining single-girder model, beam grillage model and solid model in support of the design. However, such analysis methods usually suffer from major limitations in terms of the engineering applications: single-girder model fails to account for spatial effect such as shear lag effect of the box girder and the relevant effective girder width and eccentric load coefficient; owing to the approximation in the principle equivalence, the plane grillage model cannot accurately capture shear stress distribution and local stress state in both top and bottom flange of composite box girder; and solid model is difficult to be practically combined with the overall calculation. The usual effective width method fails to provide a uniform and accurate "effective length" (and the codes fail to provide a unified design approach at those circumstance) considering different shear lag effects resulting from dead load, prestress and cable tension in the construction. Therefore, a novel spatial grid model has been developed to account for shear lag effect. The theoretical principle of the proposed spatial grid model has been elaborated along with the relevant illustrations of modeling parameters of composite box girder with corrugated steel webs. Then typical transverse and longitudinal shear lag coefficient distribution pattern at the side-span and mid-span key cross sections have been analyzed and summarized to provide reference for similar bridges. The effectiveness and accuracy of spatial grid analysis methods has been finally validated through a practical cable-stayed bridge.

• 한국항행학회논문지
• /
• 제5권1호
• /
• pp.85-96
• /
• 2001

최근에 통합 설계 최적화 프로그램인 $ASTROS^*$와 Aeroservoelasticity(ASE) 모듈에 지능구조물의 해석 모듈을 통합하는 연구가 수행되었다. 통합된 소프트웨어를 이용해 플러터 억제 시스템을 설계하는 연구를 F-16모델을 이용해 수행하였으며 능동 제어 시스템을 위하여 신경망을 이용한 제어기가 설계되었다. 압전작동기에 의해 발생한 변형을 고려하기 위해 지능구조물 모듈은 $ASTROS^*$내의 열응력 해석 모듈을 개량하여 개발되었으며 ASE내에서 조종면을 이용한 입력과 압전작동기를 이용한 입력의 상호 호환성을 가능하게 하였다. 수치 예를 통해 개발된 제어시스템이 플러터속도를 증가시키는 데 효과적임을 보였다.

• 센서학회지
• /
• 제8권1호
• /
• pp.63-68
• /
• 1999

CCD 카메라에 얻어진 비디오 신호로부터 디지털화된 얼굴영상을 얻은 다음 신속하게 눈 패턴을 검출할 수 있는 알고리즘을 제안하였다. 얼굴영역 및 눈 패턴 검출을 위해 주축성분분석(Principle Component Analysis : PCA)과 통계적인 성질이 유사한 일괄처리 SVD(Singular Value Decomposition)알고리즘 및 패턴서치회로망을 이용하였고, 정확도를 향상하기 위해 HMM(Hidden Markov Model)을 이용하였다. 제안한 알고리즘으로 기존의 주축성분분석을 이용한 패턴 검출보다 계산량이 적고 정확도도 우수하며 초당 2 프레임 정도의 실시간 처리가 가능함을 알 수 있었다.