• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.325-330
• /
• 2005

최근 제어설비 계통은 전력변환장치와 센서의 사용이 증가하여 많은 노이즈가 발생되고 있다. 이 노이즈로 인해 설비의 오동작과 제어 회로의 메모리 손실이 발생된다. 따라서, 본 논문에서는 제어설비 계통의 노이즈 발생량을 계측 분석하였고, 이에 따라 NCT, 등전위 접지, PNR, 노이즈필터와 같이 노이즈 감소를 위한 효과적인 보호설비를 적용하였고 계측 결과를 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 합동춘계학술대회 논문집 전기물성,응용부문
• /
• pp.143-144
• /
• 2008

this paper describes the electric field distribution interpretation along a shield form inner vacuum interrupter(VI). The equipotential line and electric field in a VI are analysed by a finite element method at various shield form. in result, The electric potentials of end shield form was increased or decreased because it was various the length of shield and between external insulation and source area or fix._end shield. finally shield is how to electric field affect, and advance, and will achieve the optimum design of VI inside shield.

• 전기학회논문지P
• /
• 제62권3호
• /
• pp.139-144
• /
• 2013

In Korea, where most of the sites are narrow in space and their earth resistivity is relatively high, the spaces between grounding conductors are likely to be designed narrow in order to lower ground resistance and dangerous voltage below to the permitted safety values. In addition, ground nets are in the shape of square or rectangle depending on the location and size of the facilities and ground contact area, and inner conductors are laid out in grids like the pattern of nets. Nevertheless, with the existing designs, the marginal voltage for safety gets higher as the area is extended further outside, in comparison with that of inner mesh grounding, thus causing much difficulty maintaining them equipotential, and there exist limits in the burial, grounding grid design considering the dangerous voltage of muti-layered model in the constrained sites, was studied.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권8호
• /
• pp.783-788
• /
• 1996

In this paper, the high-$T_c$ , superconductor (HTS) microstrip patch antenna which is directly coupled to a microstrip transmission line is designed and the numerical solution which evaluate near electromagnetic field of HTS antenna is presented. This solution uses the interpolation function with the vector edge triangular element. The advantage of this element is the elimination of spurious solutions attributed to the lack of enforcement of the divergence condition. The results of this method have a good agreement with $TM_10$ mode in HTS microstrip patch antenna and show that the computation of resonant length considering the fringing capacitance effect at radiating edge are proper.

• 수면정신생리
• /
• 제1권1호
• /
• pp.29-35
• /
• 1994

Overall purposes of neuropsychological tests are summarized as follows: 1) Indentifying brain damage in individuals who have symptoms of uncertain etiology; 2) Assessing the extent and nature of deficits for forensic purposes and planning appropriate intervention; 3) Evaluating the effects of intervention or rehabilitation; 4) Examining the effects of various types of brain damage across different populations; and 5) Testing theoretical propositions about brain-behavior relationship. Of the neuropsychological tests, the Luria-Nebraska Neuropsychological Battery(LNNB) is easily transportable, relatively inexpensive, and performable by trained technician. The Korean version of LNNB is now being designed and will be used clinically in the near future. Localization and equipotential theories of brain function had been prevalent until Luria's theory of brain function. Brain, composed of three brain units in the theory, is the functional system in which each brain area has specific function and produce the function-related behavior. LNNB consists of 11 clinical scales, 5 summary scales, 8 localization scales, and 28 factor scales.

• 한국전기전자재료학회논문지
• /
• 제15권11호
• /
• pp.985-990
• /
• 2002

The electrical breakdown characteristics of liquid nitrogen(LN$\sub$2/) were studied under simulated quenching conditions for application of HTS apparatus. The experimental results for various quenching condition revealed that the breakdown voltage of LN$\sub$2/ with bubble flow velocity and gap spacing. In the case, breakdown voltage decreases gradually with the bubble velocity. When it is bubble velocity from 0 to 1 $\ell$ /min, breakdown voltage rapidly decreases but decreases from 2 $\ell$/min to 10 $\ell$/min slowly. The breakdown voltage for vertical electrode arrangement is higher than that for horizontal electrode arrangement. Also, it did a electric field and potential distribution interpreting at the liquid nitrogen when the bubble existed. The plots of equipotential lines for three cases are also shown.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.369-370
• /
• 2008

This paper describes the electric field distribution of high voltage polymer bushing with inner field shaper designs. The field control can be achieved by means of the designs of such internal field shaper. But high electric stress occurred between field shaper and central conductor by the closely space. In accordance, the floating and ring shield designs was importance for electric stress grading at critical parts of the bushing. The bushing has a central conductor, and internal ring shield or floating shield, gaps are formed between field shaper and ring shield. Accordance equipotential lines extend through gaps. Maxwell 2D simulator based on the boundary element method was also introduced in order to verify the reliability of the polymer bushing.

• 전자공학회논문지A
• /
• 제31A권7호
• /
• pp.95-101
• /
• 1994

A novel concept for the analysis of planar devices with a field limiting ring(FLR) is presented which allows analytic expressions in a normalized form for the potential distributions of FLR structure. Based on the method of image charges the main and ring junctions with identical cylindrical edges are kept to be two different equipotential surfaces. The potential relations between main and ring junction of the FLR structure are compared with 2-dimensional device simulation program. MEDICI. A good accordance is found. Comparisions with experimental data reported for the optimum ring spacing and the relative improvement of the breakdowm voltages in the FLR sturcture show the validity of the concept. The normalized expressions allow a universal application regardless to the junction depths and background doping levels.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1627-1628
• /
• 2015

2011년 7월에 제정 발간된 등전위본딩에 관한 기술지침은 IEC 표준인 60364, 61643 및 62305 기반으로 기본적인 성능요건 및 기술적 상세사항을 규정하여 전력산업계에 보급되고 있다. IEC 표준이 개정됨에 따라 기술지침 관련내용에 대한 변경 및 추가 등에 대한 필요성이 대두되었으며, 관련내용을 검토하고 한국전기기술기준위원회 심의 후 2015년 3월 개정판을 재발간하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.361-364
• /
• 2008

This paper deals with assessment of electrical safety for grounding system of buildings by investigation on the spot at construction site. The investigation was carried out for grounding method, grounding type, shape of grounding electrode, grounding for lightning protection system, continuity of steelwork in reinforced concrete structure and so on. The investigation on the spot was performed by researcher, engineer with over fifteen years of industry experience all over the country. As a result of investigation on the spot to 13 buildings, common grounding method was dominant. A new grounding system based on international standards includes unity grounding system, structure grounding utilizing steel reinforced concrete, equipotential bonding. use of surge protective device.