• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.11 s.170
• /
• pp.1912-1921
• /
• 1999

The equipments mounted on guided-missile undertake heavy vibrational disturbance. Sometimes the equipments mounted on guided-missile go wrong so that the guided-missile flies over unintended place. For the vibration isolation of the equipments mounted on guided-missile, active vibration control was performed. In the case of active vibration technique, the stiffness matrix and the mass matrix are derived based on FEM (ANSYS5.0). Model reduction was carried out and, as a result, we got 7 DOF mass and stiffness matrix. For the sake of FEM model identification, modal experiment was carried out. With the help of Sensitivity Analysis, the natural frequencies of FEM were tuned to those of Experiment. In this work, the Sky Hook and the LQG control theory were adopted for v iteration control using stacked piezoactuator. Experiments were performed with changing excitation frequency from 10 Hz upto 200 Hz and we got frequency response function of guided-missile equipments. The magnitude of 3rd mode of guided-missile equipments is 8.6 % that of Uncontrolled in Skyhook controller and is 3.4 % that of uncontrolled in LQG controller.

• Korea Journal of Hospital Management
• /
• v.12 no.1
• /
• pp.31-50
• /
• 2007

This study was carried out to analyze the present condition of high-price medical technologies in South Korea and to compare it with OECD countries. This study included 10 high-price medical equipments and used medical equipment registry data of Health Insurance Review Agency. The major findings of this study are as follows; Firstly, The number and growth of high-price medical equipments in South Korea is much higher than those in other OECD countries. There are many of high-price medical equipments even in clinics. Secondly, the percentage of old poor-quality medical equipments is very high, especially in clinics. This is because of high-price of medical equipments. The results of this study implicated that there is high possibility of inappropriate use of high-price medical technologies. This may result in the increase of health expenditure; therefore, there should be a kind of regulation policy to control amount and quality of medical equipment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.5
• /
• pp.36-41
• /
• 2009

In this paper an Investigation into the actual condition of electrical equipment installation for the inspection method development based on IEC 60364. The analysis objects are the difference between electrical equipments installation in korea & electrical equipments installation based on the IEC 60364. The measurement elements are loop impedance, operating characteristic of circuit breaker and protective conductor continuance. As a result, the korea electrical equipments installation was almost same the TT system but some different of protective conductor continuance. Electrical equipments installed TN-C-S has noting problem about installation but manager dose not understand about IEC 60364.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.9
• /
• pp.797-804
• /
• 2010

In case of the construction equipment using by the military camp, such equipments are different from those equipments using at general construction site, of which muffler(silencer) is attached at the passenger seat side, since such equipments are obsoleted, it is great part that a considerably loud noises are continuously diffusing. When working, such noise can be influenced a lot of effects to those working soldiers nearby the equipment, and though it is really terrible loud noise as much as can arise a civil complaints by neighboring civilians, but because its specialty of the military, it is real state that there are many difficulties in establishing an effective soundproof countermeasure due to study shortage and lack of the relevant material regarding to military construction equipment. Accordingly, this study has ever grasped the characteristics of noise by its each frequencies and by distances about those 9 kinds of construction equipments using chiefly by the military camp. As the result, it was known that the military construction equipment is generating the loud noise which can influence bad effect to the workers, and such high sound pressure level of low frequency band can harm even to far distance.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.3
• /
• pp.578-590
• /
• 2013

The subject study was targeted towards nutrition teacher (dietitian) of elementary, middle, and high schools in Seoul areal. In addition, this study was to investigate the current status of school foodservice securement facilities & equipments and to analyze the obstructive factors for executing the HACCP system. The aim of this study was to provide base-line data so that a more efficient & effective sanitary management system for school foodservise can be settled in. All surveys were distributed and collected via email. A total of 305 survey papers were collected and out of these, 300 school results were analyzed and the results are as follows. The order of the securement facilities & equipment furnished were pre-handing equipments>washing>cooking>inspection>facilities>storage>space area>distribution equipments. The awareness of obstructive factors in executing the HACCP system was a total of 3.17 points and the order was as follows. The general obstructive factors>obstructive factors in the cooking staff executing the HACCP system>collaboration between the school/team leaders and the budget supporting department>obstructive factors in the nutrition teacher (dietitian) executing the HACCP system. School foodservice securement facilities & equipments in Seoul area must be renovated and modernized so as to improve its current situation. Furthermore, leadership programs are necessary to enhance nutritionists' understanding of the HACCP system and the cooking staff's competencies in instructing and supervising.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.12 no.2
• /
• pp.13-18
• /
• 2016

Energy saving has been main concern, thus government supporting policies which are based on Fundamentals of Low-carbon Green Growth Act', 'Green Building Support Act, have been prepared in Korea. The objective of this study is to estimate energy conservation effectiveness and economic advantage assuming that lighting equipments and heat source equipments would be retrofitted. Office building, which has total floor area of $30,000m^2$, was a subject of this study. From the estimations, electric rate will be decreased by 62,886,000 won per year due to lighting equipments retrofit, and gas rate will be decreased 11,141,000 won or 17,332,000 won per year due to heat source equipments retrofit (in case of COP 1.2 or 1.5). Payback period of each case that are calculated by energy saving cost and retrofit cost are estimated 27.9 year, 38.6 year and 29.2 year, thus economic supporting policies is necessary for effective energy saving in buildings. Meanwhile payback period of heat source equipment for new building is estimated 6.1 year and 8.3 year.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.4
• /
• pp.13-18
• /
• 2012

The semiconductor equipments generate a lot of data traffic via communication channels for the effective manufacturing processes of semiconductors and for the automation of semiconductor equipments. These data should be sent to a host computer in order to keep in a safe. The IEEE 802.11e specification gives differentiated and distributed access to a wireless communication medium with four access categories. These four access categories use different priority parameters which lead to quality of service in data traffic. In this paper, it is shown that the throughput of data depends upon the priority parameters provided by IEEE802.11e. We implement the usage of priority parameters in the SECS protocol for semiconductor equipments. It is necessary that the data from semiconductor equipments should be classified with certain priority for the effective use of our proposed method. Therefore, our scheme will contribute to improving the performance of the manufacturing processes of semiconductors.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.11
• /
• pp.591-598
• /
• 2009

The service quality with the various building equipments tends to depend on the individual superintendent's capability and efforts generally and this often lead to poor maintenances and managements of them. N-BMS(Networked Building Management System), proposed in this study, is a new type of building management method, which links principal equipments within many buildings into a communication network and carries out several significant missions such as fault detection, deterioration diagnosis and control the equipments and so on, as well as monitoring which is the main and unique purpose of the conventional BMS. How to construct the N-BMS was considered to keep performance of equipments high and thus to save energy and resource. LCC(Life Cycle Cost) based analysis was also performed in order to verify the effects of some maintenance and management works for the building HVAC systems.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.6
• /
• pp.61-66
• /
• 2004

To make a guide line of property control of angiography equipments, we made standard evaluation sheet forms of facility and management of angiography suite, physical properties of angiography equipments, and image quality of film and then surveyed them at 29 hospital nationwide. Survey and development of standard evaluation sheet form of physical properties of angiography equipments. By using resolution & radiation dose, physical properties of angiography equipments of 49 in number nationwide were evaluated. Most of them (91%) had good performance.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.2031-2033
• /
• 2004

In this paper, electromagnetic wave environment generated from electronic equipments was investigated. Since the main source of electromagnetic waves are electronic equipments, the field intensity of a harmful electromagnetic wave was measured and its harmful level was analyzed. It was also found that the result was 23%${\sim}$38% in case of TV set and microwave oven. Based on this analysis, this study proposed efficient shielding method to suppress unwanted electromagnetic wave.