• Journal of Preventive Medicine and Public Health
• /
• v.24 no.3 s.35
• /
• pp.414-427
• /
• 1991

To assess the safety of playground equipments in the elementary schools of Taegu, a site visit was made to 117 elementary schools out of 119 schools between 1st and 30th of April 1991. Safety criteria were developed on the bases of Massachusetts' Playground Safety Check List, standard height of Korean children of 6-12 years old, and source book for designing playground equipments. There were eleven different kinds of playground equipments installed in 117 schools but the number of equipments was about 50-60% of the minimum requirement set by the Ministry of Education except chin-up bar. Among the installed equipments, 47.3% of swings, 16.6% of parallel bars, 20.0% of monkey bars, and 16.0% of slides were broken down. None of the swings, slides, seesaws, monkey bars, and sandboxes met the safety criteria to the full but 59.0 of chin-up bars, 31.4% of Parallel bars, and 13,5% of stumps met the criteria fully. The proportions of equipments that were dangerous for children to play on were 26.4% for slides, 20.0% for monkey bars, 11.6% for seesaws, 10.4% for parallel bars, 9.8% for sandboxes, 7.4% for swings and stumps, and 3.9% for chin-up bars. The rests were either in need of repair or broken down. It was revealed by this survey that the playground equipments were too short in number to meet the minimum requirement, designs and size were not standardized, and many of the equipments were involved with the risk of child accidents. Therefore, a safety standard for the playground equipments should be developed and the existing equipments should be repaired immediately.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.6
• /
• pp.965-970
• /
• 2002

This study was conducted to investigate inhibition effect of sanitizers against E. coli and a hygienic condition on the surface of utensils and equipments which were used to food service. Samples swabbed using cotton were collected from the surface of stainless steel, wood and plastic utensils and equipments which were used to food service at four elementary schools in Busan and analyzed by measuring the total, coliform and Salmonella spp. count. Total plate counts were 10$^4$~10$^{5}$ CFU/100 cm$^2$ in most of utensils and equipments except plastic cutting board. There were lots of coliforms in slicer (2.8$\times$10$^1$CFU/100 cm$^2$) and peeler (1.1$\times$10$^1$CFU/100 cm$^2$). It was indicated that the sanitary condition of some utensils and equipments such as slicer and peeler should be improved promptly. To investigate inhibition effect of sanitizers against E. coli, the surface of utensils and equipments used in food service was treated at different concentration of sodium hypochlorite for 1 minute and 3 minutes, respectively. The plastic utensils and equipments were most effective aganist E. coli at 100 ppm sodium hypochlorite for 3 minutes. But the stainless steel and wood were most effective at 200 ppm sodium hypochlorite for 3 minutes. It was also treated with 70% ethyl alcohol for 10 seconds and 30 seconds, respectively. The stainless steel utensils and equipments were most effective aganist E. coli at 10 seconds, but plastic and wood were most effective at 30 seconds. Therefore, the results of this study indicated that standardization of disinfection method of utensils and equipments used in food service should be given and sanitation training for dietition should be conducted continuously.

• Journal of the Korean housing association
• /
• v.21 no.5
• /
• pp.93-101
• /
• 2010

The purpose of the study is to investigate the behaviors for ventilation to control indoor air quality and characteristics of the maintenance for ventilation equipments by multi-family housing residents. This study was conducted by the survey in the area of Seoul and Kyungki-do. The results of the study are as follows: the majority of respondents conduct ventilation once a day, below 20 minutes with opening some windows of the inside of the house. The time for ventilation is generally between 9-11 am. and 5-7 pm. Most of the wives are responsible for ventilation activities. In addition, so far building materials and furniture are not seriously considered as the source of indoor air pollution by the respondents. Their satisfaction for indoor air before and after ventilation is perceived as just the level of average. As the mechanical ventilation equipments such as a hood and an exhaust fan, half of the respondents are using them frequently. However, the ventilation equipments are not maintained well. Specially maintenance and checks for exhaust fans are hardly conducted. In conclusion, the frequency of ventilation is very limited and residents show passive attitudes about ventilation and maintenance of ventilation equipments. Therefore, for the actualization of healthy housing, educational programs and guidelines on the way of ventilation targeting the residents should be set up and a certain organization has to check periodically the performance of the ventilation equipments of each house in the multi-family housing complex.

• Quality Improvement in Health Care
• /
• v.5 no.2
• /
• pp.190-201
• /
• 1998

Background : Medical equipments take a very important role in diagnosis and treatment of disease in modern medicine and effective maintenance of the equipments is a necessary to provide a good health care to the public. After developing a new QC program for effective maintenance of medical equipments and practicing it for a year, we report the results of the new program. Methods : The maintenance data of 9 equipments in 8 categories including a CT Scanner were analyzed with regard to the parts responsible for most frequent failure and cause of the failure. After learning the most frequent failure part and cause of the failure, we developed a new QC program that emphasizes preventive maintenance of the most frequent failure part. We compared the number of failure per year and active rate of each equipment before and after the adoption of the new QC program. Results : The average number of failure per year per equipment was 20.7 before and it decreased by 43% to 11.9 after adoption of the new QC program. The average active rate of the equipments was 92.6% before and it increased by 3.2% to 95.8% after adoption of the new program. Conclusions : The practice of the new QC program appears very useful as it decreased the failure rate and increased the active rate of the equipments.

• Journal of Korea Port Economic Association
• /
• v.23 no.4
• /
• pp.23-47
• /
• 2007

We analyzed the questionnaire survey for the current maintenance of Incheon port's loading and unloading equipments and the possibility of TPM(Total Productive Maintenance) application. And also, We certificated Structural Equation Model with computer packages. Results of the survey indicated that the current maintenance of Incheon port's loading and unloading equipments was not good. We recognized the relationship of contextual factors about the productivity of the loading and unloading equipments The productivity of the loading and unloading equipment positively depends on maintenance management of equipments, but the organization and personnel management does not have a influence on the productivity of the loading and unloading equipment. So we suggest TPM as the future maintenance methodology of equipments. Using TPM to the loading and unloading equipments, we will try to improve the methodology of the organization and personnel management.

• Korea Journal of Hospital Management
• /
• v.5 no.2
• /
• pp.22-39
• /
• 2000

The purpose of this study was to determine the difference between estimated profit and utilization of medical equipment upon purchasing and actual results at one teaching hospital in Seoul, Korea Medical equipments over $100,000 from 1992 to 1997 were selected and results were as follows: 1. Twenty equipments out of thirty exceeded estimated profits and the difference was 3.98 billion won and ten equipments did not reach the estimated profits and 5.5 billion won was the difference. Diagnostic equipment exceeded the estimated profit which surgical equipment didn't. 2. Eleven equipments exceeded estimated utilization, which showed 100%. In the mean time, eighteen equipments didn't reach the estimated utilization, which was 71%. Diagnostic equipment showed the less estimated utilization than surgical equipment 3. Twenty-one equipments showed the 6.83 billion won profits and nine equipments showed the 1.6 billion won deficits. Diagnostic equipment was more profitable than surgical equipment. Finally. diagnostic equipment helped improving hospital management than surgical equipment. 4. Main factors which showed the big difference from the initial plan were lacking reasonable estimated method, no evaluation system for purchase, emphasis in medical treatment, excessive expenditure in maintenance, duplicated investment for medical equipment and leadership commitment. As a result. Substantial planning is required from the requesting department in consideration of estimated profit and utilization and systematic quality control is needed to confirm. Also, One-sided decision making should be avoided to purchase a high cost medical equipment and efforts should be made in examining carefully and developing a reasonable analytic method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3470-3476
• /
• 2012

In this study, for cadastral surveying specified in current relevant legislation, regulations of allowable error tolerance and applicable equipments, accuracy in the relevant regulations and applicable regulations were comprehensively studied. Based on them, the objective was to develop performance standard for cadastral surveying equipments satisfying allowable error tolerance of cadastral surveying specified in the special law for cadastral re-survey. The study results are as follows. By comparing current legislation for performance and allowable error tolerance of applicable equipments with provisions of the special law for cadastral re-survey, analyzed were where performance of equipments needs to be improved on cadastral re-survey project. Based on them, as primary control point surveying and detail surveying were separated, performance standard of equipments were presented. Results of this study may be utilized as basic materials for supply and demand program of surveying equipments on establishment of the basic plan for cadastral re-survey project.

• Journal of Korea Technology Innovation Society
• /
• v.17 no.4
• /
• pp.733-762
• /
• 2014

The government mandates that national research facilities & equipments through R&D business budget should be registered on the National Science and Technology Information Service (NTIS) for the purpose of the efficient use of the research facilities & equipments. This study is to contribute to the national policies on the efficient management of the research facilities & equipments by recognition methodology with the university's members and analysis of the impact factors of the universities' registration process improvement through the Define level and Measure level of the Six Sigma DAMIC. The survey and interview were conducted on research directors, professors joining university administration, graduate students, researchers, and staffs of A University. The findings are the lack of understanding specific steps and life-cycle management of research facilities & equipments. It is necessary to collect suggestions from universities and pursue policies considered the unique characteristics of the university for advanced operating and maximizing use of university's national research facilities & equipments. Research facilities & equipments enrollment compliance rate and registration accuracy were selected as CTQ-Y through the Six Sigma. 72 potential cause variables were derived through Process Map and C & E Diagram. 13 variables were determined as core potential factors through the X-Y Matrix and Pareto Chart. Research institutions should maximize utilization of research facilities & equipments through deriving a potential variables of the process improvements and designing a detail improvements based on the characteristics of each institutions.

• Journal of the Korean Society of Safety
• /
• v.27 no.1
• /
• pp.7-13
• /
• 2012

This paper describes the diagnosis techniques using UV images taken in the field under energized condition of power equipments in order to figure out and analyze the abnormal states on the terminals of power equipments. To classify the features of the terminals, the counted No. of the corona generated at the terminals is defined. According to the result detected, the No. of corona detected on the power equipments installed inside a building is less than that installed outside a building, and it strongly depends on the environment and installed condition. Thus, the environmental condition needs enhanced, and stable operation by the periodic inspection under energized condition of the power equipments is required. Especially, the event counting technique using UV camera is useful for the power equipments apart more than 20 m to apply, and there can be an error due to the features of the sensing techniques when the distance between the user and the objects is close less than 15 m. Therefore, the experimental result shows that event counting technique is employed in the case of the distance more than 15 m. The electrical safety can be ensured by using the UV detection technique and the criteria.

• The Journal of Korean Association of Computer Education
• /
• v.3 no.2
• /
• pp.77-86
• /
• 2000

As the information technology is being rapidly developed, Korean government supplies various communication equipments to schools and therefore, it causes difficulties to cope with various faults from complicated school network communication equipments. These faults come from many reasons for wasting school budget and decreasing effectiveness in school administration. From this, it is necessary to figure out the problems of school communication equipments and cope with these problems quickly and preventing those faults in advance. In this paper, we present the school communication equipments analysis methodology not only quantitative but also qualitative aspects. We are sure that applying this methodology may improve the effectiveness of school network equipments management.