• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.20-36
• /
• 2001

The purpose of this paper is estimating environmental carving capacity of Seoul Metropolitan Area for a sustainable city management using system dynamics model. A sustainable development requires a society to define sustainability constraints or environmental limits, environmental carving capacity. Environmental carving capacity can be defined as the level of human activity which a region can sustain at an acceptable quality of life level. This concept of environmental carving capacity has several important application to sustainable city planning and management. If the limitation of a human activity can be supported by a scientific data on carving capacity, the resulting decision and actions could more easily win public support for a sustainable development. However, one of the key issues is how to operationalize the carving capacity. In this paper, the environmental carving capacity was operationalized as a maximum number of industry structure, population, and housing that can sustain certain level of environmental quality of Seoul Metropolitan Area. The model developed in this paper consisted off sectors: population, housing, industry, land, and environmental sector. The model limits its main focus on the NO$_2$level of ambient air of Seoul. Carving capacity Seoul Metropolitan Area was estimated by figuring out the maximum number of population, industry structure, housing at an equilibrium point that sustain a desirable NO$_2$level. Based on the model estimation, several policy implications for a sustainable city management was discussed.

• 소성∙가공
• /
• 제27권2호
• /
• pp.115-122
• /
• 2018

Most domestic and international standards on the forming limit diagram (FLD) including ISO 12004-2, use a 'position-dependent method,' which determines the forming limit from a strain distribution measured on the specimen after necking or fracture. However, the position-dependent method has inherent problems such as the incidence of asymmetry of a strain distribution, the estimation of missing data near fracture, the termination time of test, and the deformation due to the new stress equilibrium after a fracture, which is blamed for causing sometimes a significant lab-to-lab variation. The 'time-dependent method,' which is anticipated to be a new international standard for evaluating the forming limit, is expected to greatly improve these intrinsic disadvantages of the position-dependent method. It is because the time-dependent method makes it possible to identify and accurately determine the forming limit, just before the necking point from the strain data as continuously measured in a short time interval. In this study, we propose a new time-dependent method based on a Gaussian fitting of strain acceleration with the introduction of 'normalized correlation coefficient.' It has been shown in this study that this method can determine the forming limit very stably and gives a higher value, which is in comparison with the results of the previously studied position-dependent and time-dependent methods.

• 제어로봇시스템학회논문지
• /
• 제22권5호
• /
• pp.346-352
• /
• 2016

This paper proposes an adaptive robust control method for an acrobot system in the presence of input disturbance. The acrobot system is a typical example of the underactuated system with complex nonlinearity and strong dynamic coupling. Also, disturbance can cause limit cycle phenomenon which appears in the acrobot system around the desired unstable equilibrium point. To minimize the effect of the disturbance, we apply a fuzzy disturbance estimation method for the swing-up and balancing control of the acrobot system. In this paper, both disturbance observer and controller for the acrobot system are designed and verified through mathematical proof and simulations.

• 미술이론과 현장
• /
• 제10호
• /
• pp.85-103
• /
• 2010

Mona Hatoum and community make unlikely bedfellows. From her beginnings as a teenage exile to her maturity as an internationally celebrated artistic nomad, Hatoum defies classification within any single geographical or cultural community. Attempting, however, to locate specific points of contact between her and certain communities in terms of artist-in-residence projects in which she participated might be a particularly fruitful way of circumventing her notorious critical resistance to identity and her refusal of homogeneity. This paper starts with Miwon Kwon's critique of contemporary practices in community-based art, which locate an essentialising force that isolates a single point of commonality and overlooks authentic differences. It then turns to Jean-Luc Nancy's reconceptualization of community as 'unworked' and 'being-in-common' to provide analytical tools for avoiding the dangers of essentialism. By examining the three residencies that Hatoum accepted in the mid-1990s in the light of Nancy's observations and theories, and by bringing the idea of artistic nomadism and that of community into juxtaposition, we hope to show that Hatoum succeeds in finding an equilibrium between art and community, and that this sheds new light on the issues raised in recent discussions on such relationship.

• 한국공간구조학회논문집
• /
• 제14권3호
• /
• pp.47-56
• /
• 2014

This paper investigates the characteristics of unstable behaviour and critical buckling load by joint rigidity of framed large spatial structures which are sensitive to initial conditions. To distinguish the stable from the unstable, a singular point on equilibrium path and a critical buckling level are computed by the eigenvalues and determinants of the tangential stiffness matrix. For the case study, a two-free node example and a folded plate typed long span example with 325 nodes are adopted, and these adopted examples' nonlinear analysis and unstable characteristics are analyzed. The numerical results in the case of the two-free node example indicate that as the influence of snap-through is bigger; that of bifurcation buckling is lower than that of the joint rigidity as the influence of snap-through is lower. Besides, when the rigidity decreases, the critical buckling load ratio increases. These results are similar to those of the folded-typed long span example. When the buckling load ratio is 0.6 or less, the rigidity greatly increases.

• 동의생리병리학회지
• /
• 제23권4호
• /
• pp.908-913
• /
• 2009

This study was conducted to investigate the influence that it has on the application pre and post balance index using method with spiral and reaction point balance taping application against 20 stroke patients. The taping application pre and post static eye opening balance index was statistically no significant difference in the Mean X Speed, and the Extent in X Dirction but in the Mean Y Speed, the Velocity Moment, and Extent in Y Direction, there were statistically significant difference(p<0.05). The taping application pre and post static eye closing balance inde was statistically no significant difference in the Mean X Speed, in Y Direction, there were statistically significant difference(p<0.05). From above results, the method of the applied taping was the equilibrium stability performance of the Y-axis than the stability of the balance of the X-axis, therefore it is considered to study the taping application method in the balance of detail stroke patients.

• Journal of Advanced Marine Engineering and Technology
• /
• 제10권2호
• /
• pp.136-145
• /
• 1986

The perfect and accurate methods to control the wear are not made clear so far. For this phenomenon only mating surface has been studied. In order to control the wear the essence of it has to be made clear. It is reported that adhesive wear might occure as a result of plastic deformation, the fracture and removal or transfer asperities on close contacting surfaces. On this view point the plastic flow was attempted to compare with fluid or electromagnetic flow. The partial differential equations of equilibrium for the plane strain deformation will make use of the method of characteristics. The characteristic curves or characteristics of the hyperbolic equation coincide with the slip lines by R. Hill's papers. By Hencky's stress equation, it is evident that if P and .phi. are prescribed for a boundary condition then it may be possible to proceed along constant .alpha. and .betha. lines to determine the value of the hydrostatic pressure everywhere in the slip line field net work. A wedge formation mechanism has been considered for an explanation of this matters. The analysis shows that there is a critical value, which depends on the hardness ratio and the shear stress on the interface, for the top angle of asperity is less than this critical value, the asperity can yield plastically despite of being harder than the mating surface.

• Advances in Computational Design
• /
• 제5권4호
• /
• pp.397-416
• /
• 2020

Functionally graded material (FGM) illustrates a novel class of composites that consists of a graded pattern of material composition. FGM is engineered to have a continuously varying spatial composition profile. Current work focused on buckling analysis of beam made of stepwise linear and quadratic graded material in axial direction subjected to axial span-load with piecewise function and rested on shear layer based on classical beam theory. The various boundary and natural conditions including simply supported (S-S), pinned - clamped (P-C), axial hinge - pinned (AH-P), axial hinge - clamped (AH-C), pinned - shear hinge (P-SHH), pinned - shear force released (P-SHR), axial hinge - shear force released (AH-SHR) and axial hinge - shear hinge (AH-SHH) are considered. To the best of the author's knowledge, buckling behavior of this kind of Euler-Bernoulli beams has not been studied yet. The equilibrium differential equation is derived by minimizing total potential energy via variational calculus and solved analytically. The boundary conditions, natural conditions and deformation continuity at concentrated load insertion point are expressed in matrix form and nontrivial solution is employed to calculate first buckling loads and corresponding mode shapes. By increasing truncation order, the relative error reduction and convergence of solution are observed. Fast convergence and good compatibility with various conditions are advantages of the proposed method. A MATLAB code is provided in appendix to employ the numerical procedure based on proposed method.

• 제어로봇시스템학회논문지
• /
• 제4권6호
• /
• pp.713-721
• /
• 1998

In this paper a new modeling and an optimal pole-placement control for the suspension system of Macpherson type are investigated. The rotational motion of the unsprung mass is emphasized in the new modeling. The two generalized coordinates selected in the new model are the vortical displacement of sprung mass and the angular displacement of control arm. Both variables are measured from their static equilibrium points. It is shown that the conventional model is a special case of the new model since the transfer function of the new model coincides with that of the conventional one if the lower support point of the shock absorber is located at the mass center of the unsprung mass. It is also shown that the resonance frequencies of the new model agree better with experimental results. Therefore, the new model is more general in the sense that it Provides an extra degree of freedom in determining the plant model for control system design. An optimal pole-placement control which combines LQ control and pole-placement technique is applied to the new model. Simulations are provided.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
• /
• pp.30-33
• /
• 2004

Shallow p+-n junctions were formed by low-energy ion implantation and dual-step annealing processes The dopant implantation was performed into the crystalline substrates using $BF_2$ ions. The annealing was performed with a rapid thermal processor and a furnace. FA+RTA annealing sequence exhibited better junction characteristics than RTA+FA thermal cycle from the viewpoint of junction depth. A new simulator is designed to model boron diffusion in silicon, which is especially useful for analyzing the annealing process subsequent to ion implantation. The model which is used in this simulator takes into account nonequilibrium diffusion, reactions of point defects, and defect-dopant pairs considering their charge states, and the dopant inactivation by introducing a boron clustering reaction. Using a resonable parameter values, the simulator covers not only the equilibrium diffusion conditions but also the nonequilibrium post-implantation diffusion. Using initial conditions and boundary conditions, coupled diffusion equation is solved successfully. The simulator reproduced experimental data successfully.