당, 알코올, 유기산 및 아미노산 등과 같은 다양한 유기물에 포함된 화학에너지를 전기에너지로 전환시키는 효소 연료전지의 성능은 anode 뿐만 아니라 cathode에도 큰 영향을 받는다. 본 연구의 목적은 laccase 기반의 고성능 cathode 전극을 개발하는데 있다. 효소, 전자전달체 및 탄소나노튜브로 구성된 효소 복합체를 제조하고 이를 전극 표면에 다층으로 부착하며 층수 및 탄소나노튜브의 첨가 유무가 전극 성능에 미치는 영향을 조사하였다. 전극 표면에 효소-전자전달체(Lac-(PVI-Os-dCl))의 층수가 증가할수록 전극에서 발생되는 환원 전류량이 증가하였다. 탄소나노튜브가 첨가된 효소-전자전달체 복합체 전극(Lac-SWCNTs-(PVI-Os-dCl))이 Lac-(PVI-Os-dCl) 전극에 비하여 1.7배 많은 환원 전류를 생성하였다. Lac-SWCNTs-(PVI-Os-dCl)과 Lac-(PVI-Os-dCl)의 비율을 변화시키며 적층한 전극들에서 2층의 Lac-(PVI-Os-dCl)과 2층의 Lac-SWCNTs-(PVI-Os-dCl)으로 구성된 전극이 가장 많은 양의 환원 전류(10.1±0.1 µA)를 생성하였다. 단일 층의 Lac-(PVI-Os-dCl)로 구성된 cathode를 사용하는 셀과 최적화된 cathode를 사용하는 셀의 최대 생산 전력밀도는 각각 0.46±0.05와 1.23±0.04 µW/cm2였다. 본 연구 결과는 전극 표면에 laccase, 전자전달체 및 탄소나노튜브로 구성된 복합체의 적층 최적화를 통해 cathode 및 이를 이용하는 효소 연료전지의 성능을 향상시킬 수 있음을 시사한다.
본 연구는 땀에 존재하는 젖산을 연료로 사용하여 전기를 생산하는 웨어러블 연료전지용 고전력 젖산 산화효소 전극을 개발하는 데 그 목적이 있다. 유연성 있는 탄소종이 기반의 고정화효소 전극을 제작하고 평가하였다. 전해질 내 젖산농도 증가에 따라 젖산 산화효소(lactate oxidase, LOx)의 촉매작용으로 전류생성량이 증가하였다. 금 나노입자가 부착된 탄소종이에 고정화된 LOx가 탄소종이에 부착된 LOx보다 1.5배 많은 전류를 생성하였다. 빌리루빈 산화효소(bilirubin oxidase, BOD)가 고정화된 cathode는 질소로 퍼지(purge)된 전해질보다 산소로 포화된 전해질에서 높은 환원전류를 발생시켰다. 두 전극으로 구성된 연료전지를 제작하여 방전전류 변화에 따른 셀전압을 측정하였다. 방전 전류밀도 값이 66.7 ㎂/cm2에서 셀 전압은 0.5±0.0 V였고, 셀 전력량은 최대치인 33.8±2.5 ㎼/cm2를 나타내었다.
Since cellulose is the only organic material that is annually replenishable in very large quantities, we must explore ways to utilize it as a source of energy, food and chemicals. For the utilization of this resource, it is first enzymatic hydrolyzed to glucose, then the glucose can be used as a food, converted single cell protein by microorganism, fermented to clean burning fuel and other chemicals. Cellulolytic enzyme, cellulase, consists of two or three major components, $C_1-cellulase$, $C_x-cellulase$ and ${\beta}-glucosidase$. $C_x-cellulase$ are fairly common but $C_1-cellulase$ are quite rare. Trichoderma viride is the best source of active cellulose, especially $C_1-enzyme$. Saccharification rate of cellulose in greatly influenced by the degree of crystallinity and extent of lignification. But by the pretreatment the substrate with cellulose swelling agent, delignifying reagent and physical treatment, the degree of saccharification is enhanced. Thus, glucose syrups of 2 to 10% concentration are realized from milled newspaper. The enzymatic hydrolysis of such energy rich material, such as cellulose, to glucose is technically feasible and practically achievable on a very large scale.
This study evaluated the microbial conversion of coconut oil waste, a major agro-residue in tropical countries, into single cell oil (SCO) feedstock for biodiesel production. Copra cake was used as a low-cost renewable substrate without any prior chemical or enzymatic pretreatment for submerged growth of an oleaginous tropical mangrove fungus, Aspergillus terreus IBB M1. The SCO extracted from fermented biomass was converted into fatty acid methyl esters (FAMEs) by transesterification and evaluated on the basis of fatty acid profiles and key fuel properties for biodiesel. The fungus produced a biomass (8.2 g/l) yielding 257 mg/g copra cake SCO with ~98% FAMEs. The FAMEs were mainly composed of saturated methyl esters (61.2%) of medium-chain fatty acids (C12-C18) with methyl oleate (C18:1; 16.57%) and methyl linoleate (C18:2; 19.97%) making up the unsaturated content. A higher content of both saturated FAMEs and methyl oleate along with the absence of polyunsaturated FAMEs with ≥4 double bonds is expected to impart good fuel quality. This was evident from the predicted and experimentally determined key fuel properties of FAMEs (density, kinematic viscosity, iodine value, acid number, cetane number), which were in accordance with the international (ASTM D6751, EN 14214) and national (IS 15607) biodiesel standards, suggesting their suitability as a biodiesel fuel. The low cost, renewable nature, and easy availability of copra cake, its conversion into SCO without any thermochemical pretreatment, and pelleted fungal growth facilitating easier downstream processing by simple filtration make this process cost effective and environmentally favorable.
JEON SUNG JIN;SHIN IN HO;SANG BYUNG IN;PARK DOO HYUN
Journal of Microbiology and Biotechnology
/
제15권2호
/
pp.281-286
/
2005
We created a new graphite-Cu(II) electrode and found that the electrode could catalyze FADH$_2$ oxidation and FAD reduction coupled to electricity production and consumption, respectively. In a fuel cell with graphite-Cu(II) anode and graphite-Fe(III) cathode, the electricity was produced by coupling to the spontaneous oxidation of FADH$_2$ Fumarate and xylose were not produced from the enzymatic oxidation of succinate and xylitol without FAD, respectively, but produced with FAD. The production of fumarate and xylose in the reactor with FAD electrochemically regenerated was maximally 2- 5 times higher than that in the reactor with FAD. By using this new electrode with catalytic function, a bioelectrocatalysts can be engineered; namely, oxidoreductase (e.g., lactate dehydrogenase) and FAD can function for biotransformation without an electron mediator and second oxidoreductase for cofactors recycling.
Secondary walls have recently drawn research interest as a primary source of sugars for liquid biofuel production. Secondary walls are composed of a complex mixture of the structural polymers cellulose, hemicellulose, and lignin. A matrix of hemicellulose and lignin surrounds the cellulose component of the plant's cell wall in order to protect the cell from enzymatic attacks. Such resistance, along with the variability seen in the proportions of the major components of the mixture, presents process design and operating challenges to the bioconversion of lignocellulosic biomass to fuel. Expanding bioenergy production to the commercial scale will require a significant improvement in the growth of feedstock as well as in its quality. Plant biotechnology offers an efficient means to create "targeted" changes in the chemical and physical properties of the resulting biomass through pathway-specific manipulation of metabolisms. The successful use of the genetic engineering approach largely depends on the development of two enabling tools: (1) the discovery of regulatory genes involved in key pathways that determine the quantity and quality of the biomass, and (2) utility promoters that can drive the expression of the introduced genes in a highly controlled manner spatially and/or temporally. In this review, we summarize the current understanding of the transcriptional regulatory network that controls secondary wall biosynthesis and discuss experimental approaches to developing-xylem-specific utility promoters.
Sim, Seon Jeong;Yong, Seong Hyeon;Kim, Hak Gon;Choi, Myung Suk;Choi, Pil Son
Journal of Plant Biotechnology
/
제48권4호
/
pp.278-288
/
2021
The development of bioenergy through biomass has gained importance due to the increasing rates of fossil fuel depletion. Biomass is important to increase the productivity of bioethanol, and production of biomass with high biomass productivity, low lignin content, and high cellulose content is also important in this regard. Inorganic salts are important in the cultivation of biomass crops for the production of biomass with desirable characteristics. In this study, the roles of various inorganic salts in biomass and bioethanol production were investigated using an in vitro tobacco culture system. The inorganic salts evaluated in this study showed dramatic effects on tobacco plant growth. For example, H2PO4 substantially improved plant growth and the root/shoot (R/S) ratio. The chemical compositions of tobacco plants grown in media after removal of various inorganic salts also showed significant differences; for example, lignin content was high after Mg2+ removal treatment and low after K+ treatment and H2PO4 removal treatment. On the other hand, NO3- and H2PO4 treatments yielded the highest cellulose content, while enzymatic hydrolysis yielded the highest glucose concentration ratio 24 h after NH4+ removal treatment. The ethanol productivity after H2PO4 removal treatment was 3.95% (w/v) 24 h after fermentation and 3.75% (w/v) after 36 h. These results can be used as the basis for producing high-quality biomass for future bioethanol production.
본 연구에서는 효소연료전지의 율속 반응인 산화극의 효소반응 강화 및 효소 담지량을 증가시키기 위하여 안트라센 가교제를 도입하였다. CNT/PEI 담지체에 가교 처리된 글루코오스 산화효소(GOx)를 전기적인 극성을 이용하여 결합시켰다(AC[CNT/PEI/GOx]). 본 촉매의 성능을 확인하기 위하여 전기화학 평가가 수행되었으며, 성능 비교를 위해 가교제 처리를 하지 않은 CNT/PEI/GOx 촉매도 같이 전기화학 테스트를 진행하였다. 전기화학적 특성 평가들을 통해 글루코오스 산화효소 담지량이 증가한 것을 확인하였으며, 라인위버-버크 방정식 통해 AC[CNT/PEI/GOx] ($K_m$ : 0.73 mM)가 가교제 처리를 하지 않은 CNT/PEI/GOx ($K_m$ : 1.71 mM) 보다 우수한 성능을 지닌 것을 확인했다. 또한, 완전지 성능평가 결과 최대 전력 밀도(Maximum power density, MPD)도 상승($21.2{\mu}W/cm^2$에서 $72.6{\mu}W/cm^2$로)한 것을 볼 수 있었는데 이를 통해 글루코오스 산화효소 담지량 및 전자전달능력이 향상되었다는 것을 재확인 하였다.
액화 실험에서 BAN과 Termamyl을 비교할 때 전반적으로 Termamyl이 우수했으며 Termamyl을 (0.00625% ~0.025% 범위로 첨가하였을 때 첨가량 증가에 따른 액화반응 촉진이 뚜렷이 관찰되였다. Termamyl 240uc의 경우 타파오카에 대해 최소 0 0.0125 (v/w)% 이상이 필요하였고, 반응시간은 2 시간 정도가 석당하였다. 최적온도는 $90∼95^{\circ}C$이었고 pH는 5.8 부근이 최척이였다. 반응초기 점도가 매우 높게 나타나는데 호화속도를 약간 줄이가 위해 초기 온도를 $70^{\circ}C$정도로 낮추는 갯이 좋았다. 당화실험에서는 Novo AMG 및 국내 도일 산엽 당 화효소 모두 액화된 타피오카 용액을 잘 당화시켰다. 그러나 Novo AMG와 도일 당화효소의 활성은 기 질 에 따라 약간썩 탈랐다. 즉 이당류인 말토오스를 기 질 로 할 때는 Novo AMG의 단위 부피당 활성이 도일 당화효소의 약 1.2배이였으나, 전분을 기질로 할 때는 활성비가 1.5배였다. 경시적으로 볼 때 초기에는 당화 속도가 빨랐고 포도망이 축적되는 후기에는 당화속도 가 감소하였다. 당화의 최적온도는 약 $55∼60^{\circ}C$ 부근이었고 pH는 조절하지 않는 경우 (pH 5.7)와 조절 한 경우 (pH 4.3)간에 차이가 없었다. 85% 이상의 당화를 위해서는 타피오카 샤용량에 대해 Novo AMG 400uc을 기준으로 O.0625(v/w)% 이상, 그 리고 10시간 이상의 반응사간이 필요하였다.
이 논문은 센서 및 연료전지에 사용할 수 있는 $Pt-Ru@TiO_2-H$ 나노구조체촉매의 제조 및 전기화학적 촉매의 특성에 대한 것이다. 이 $Pt-Ru@TiO_2-H$ 나노구조체촉매는 주형제인 폴리스틸렌볼(PSB)을 제조하고, 이 주형제의 표면에 졸-겔 반응을 통해 $TiO_2$를 코팅한 후, $Pt^{4+}$와 $Ru^{3+}$의 환원에 의해 제조하였다. 제조된, $Pt-Ru@TiO_2-H$ 나노구조체촉매는 전자투과현미경(TEM), X-선 회절(XRD)와 원소분석에 의해 특성평가 하였고, $Pt-Ru@TiO_2-H$의 전기화학적 촉매특성은 에탄올, 메탄올, 도파민, 아스크로브 산, 프로말린과 글루코오즈의 산화-환원 능력에 의해 평가 하였다. 이 $Pt-Ru@TiO_2-H$ 나노구조체촉매는 바이오분자에 대해 전기화학적촉매 특성을 나타내어, 연료전지 전극 또는 비효소바이오센서에 사용 될 것으로 기대된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.