• 한국방사선학회논문지
• /
• 제17권4호
• /
• pp.531-539
• /
• 2023

자체흡수는 환경 시료의 감마 분광 측정 정확도에 영향을 미치는 가장 중요한 요소이다. 특히, 샘플의 화학적 구성, 기하학적 모양, 두께, 밀도, 원자 번호, 샘플과 검출기 사이의 거리, 방출된 감마 광자의 에너지 및 샘플 내 습도 계수 또는 백분율과 같은 기타 요인에 의해 영향을 받는다. 보정 방법을 테스트하기 450 ml CRM 표준선원(9개 핵종) 마리넬리 비커를 사용하였다. 보정된 값들을 적용하여 환경시료 중 토양시료 5개를 밀도별로 측정하였다. 따라서, 자체흡수 값은 다소 크고 낮은 광자 에너지에 더 효과적임을 알 수 있다. 환경 시료의 경우 선원자체 흡수를 통한 전체 에너지 피크 효율은 샘플의 밀도에 크게 의존함을 확인하였다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권1호
• /
• pp.21-25
• /
• 2002

To maximize and sustain the productivity of Monascus pigments, various environmental and nutritional parameters, such as the initial moisture content, pH, inoculum size, sample size, and nutrient supplement, that influence pigment production were evaluated in solid-state cultures as follows: initial moisture content, $50\%;$ pH, 6.0; inoculum size $1\;\times\;10^4$ spore cells $(grams\;of\;dry\;solid\;substrate)^{-1};$ sample size, 300 g. All supplementary nutrients (carbon, nitrogen, and mineral sources) added has inhibitory effects on the cell growth and red pigment production. In open tray culture the maximum biomass yield and specific productivity of red pigments were 223 mg DCW $(grams\;of\;initial\;dry\;substrate)^{-1}$ and, $47.6\;OD_{500}\;(DCW\;grams)^{-1}h^h{-1}$ respectively.

• 대한환경공학회지
• /
• 제22권3호
• /
• pp.505-510
• /
• 2000

본 연구는 부영양화시 다량 발생하고, 독소생성의 주원인 종으로 알려진 Microcystis aeruginosa의 정수처리 중 응집공정에서 전염소처리의 영향을 조사하였다. Microcystis aeruginosa를 실험실에서 배양하여, $10^5cell/mL$가 되도록 인공시료를 만들었다. 전염소처리의 염소주입량은 각각 0.2, 1.0, 10 mg-Cl/L으로 하였고, 반응시간은 1시간과 1분으로 하였다. 응집 후 모든 시료의 탁도는 응집제를 0.4 mg-Al/L 주입한 후 매우 낮게 나타났으므로 탁도 유발물질은 염소주입량에 의한 영향이 매우 낮은 것으로 나타났다. 염소량이 증가함에 따라 응집 후 잔류알루미늄은 감소하였고, $UV_{254}$는 증가하였다. 적당한 염소농도(1.0 mg-Cl/L)에서는 반응시간이 길어짐에 따라 $UV_{254}$가 증가하였다.

• 한국환경보건학회지
• /
• 제24권1호
• /
• pp.32-37
• /
• 1998

The Carbon Dioxide is the gas, which causes green house effects, unusual changes in the weather, destruction of the life. Almost every nation in the world is trying to search the countermeasure to this poisonous gas. I synthesized $Fe_3O_4$ and NaOH, in order to decompose the Carbon Dioxide. Among the particles synthesizing $Fe_3O_4$, I chose the equivalent ratio 1.00 which can decompose the Carbon Dioxide best, and fixed that equivalent ratio and added the 0.005-3.00 mole percentage of NiCl$_2$ and synthesized $Fe_3O_4$. I studied the decomposition of the Carbon Dioxide and methanized reaction, by measuring its crystal structure, thermochemistrical character and specific surface area. In decomposing the Carbon Dioxide, I used oxygen-deficit Magnetite which I produced by injecting the hydrogen gas into the synthesized sample. I observed the methanization reaction by raising the temperature of sample up to 650$\circ$C and having it reacted with the hydrogen gas. The decomposition of the Carbon Dioxide was added 0.005, 0.03, 0.05 mole percentage of NiCl$_2$ was more effective than pure $Fe_3O_4$. All sample in which the decomposition of the Carbon Dioxide took place produced the methane gas.

• 한국환경보건학회지
• /
• 제34권6호
• /
• pp.403-413
• /
• 2008

Toxic effect of methyl tert-butyl ether (MTBE), tert-butyl alcohol (TBA) and formaldehyde (FA) on microbial activity and diversity was compared in rice field, leek patch, and tidal mud flat soil samples. MTBE, TBA and FA with different concentrations were added into microcosms containing these soil samples, and placed at room temperature for 30 days. Then the microbial activities such as dehydrogenase and viable cell numbers and microbial community using a DGGE (Denaturing gradient gel electrophoresis) fingerprinting method were measured. Among the samples, dehydrogenase activity in rice field was inhibited the most by MTBE, TBA and FA. The toxic effect was higher according to the following orders: FA > MTBE > TBA. Dominant species in the microcosms contaminated with MTBE, TBA and FA were Chloroflex, Bacilli, gamma-proteobacteria in the rice field sample, Sphingobacteria, Flavobacteria, Actinobacteria, Bacilli, gamma-proteobacteria in the leek patch sample, and Sphingobacteria, Flavobacteria, delta-proteobacteria, gamma-proteobacteria in the tidal mud flat sample.

• 환경영향평가
• /
• 제22권5호
• /
• pp.427-437
• /
• 2013

Generation rate of construction wastes in Korea has occupied preponderantly in recent years. To understand chemical properties of recycled concrete aggregate (RCA), RCA samples were tested for their leaching characteristics. Leaching tests were conducted according to Korean Standard Leaching Test (KLT) and Toxicity Characteristics Leaching Procedure (TCLP) respectively. The RCA samples were characterized using X-ray fluorescence (XRF). Alkalinity of the leachate was determined using a pH meter titration method. The XRF analysis result shows that the calcium oxide (CaO) content in the RCA sample is 25.3~50.4 %. When the RCA sample was mixed with water in a batch reactor, pH in the solution was rapidly increased, and 70% of the total pH change was found in 1 hour. The TCLP showed slightly higher efficiency for leaching heavy metals than the KLT. The leaching efficiency was also higher as the particle size of RCA sample was smaller. The leaching test results suggest that RCA can be generally classified as nonhazardous waste.

• 한국환경보건학회지
• /
• 제35권6호
• /
• pp.510-516
• /
• 2009

Polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs) were measured in soil samples of Ansung in Kyonggi-province to investigate concentration distribution of PBDEs and PCBs. The 10 soil samples were collected using a stainless steel hand-held corer that was cleaned before and after each sample using hexane. Total concentration of PBDE and PCBs were 2,205.3 and 348.1 pg/g dry weight (DW) in soil sample, respectively. BDE-209 showed as the most abundant congener in soil samples which was related to imported amount and usage amount of deca-BDE technical mixture in Korea. Also, BDE-99, BDE-47, BDE-100 deposition in soil sample was higher than other congeners and was related to the imported and usage amount reported for penta-BDE technical mixture in Korea. Correlation coefficient between PBDE contribution and technical mixture formulation (Bromokal 70-5DE) were significant (r=0.91, p<0.01) which suggests the influence of sources in this technical mixtures.

• 한국환경과학회지
• /
• 제11권10호
• /
• pp.1097-1101
• /
• 2002

Activated carbon is amorphous and its intraparticle pores are well developed. Thus it has high adsorption capabilities and catalytic effect, and is utilized in many areas of industries such as food processing. In recent years, the demand of activated carbon has been increased to solve the environmental problems-waste treatment and removal of poisonous gas. Therefore, in this study an activated carbon was made using the waste and then the industrial characteristics of the produced activated carbon were investigated. The result showed that the carbonization yield was decreased when carbonization temperature was increased from 400 to $600^{\circ}C$ and that the optimal carbonization temperature was $500^{\circ}C$. The optimal concentration of NaOH for removing ash in the raw sample was 1~2N. The iodine adsorption of activated carbon using waste sample at $500^{\circ}C$ carbonization was 1204.28mg/g. The activation result of carbonization sample showed that the optimal activation condition was the carbonization at $500^{\circ}C$ and the activation at $800^{\circ}C$. So the production of activated carbon was thought to be possible, reused as resource, and decreased the environmental pollution.

• 한국산업보건학회지
• /
• 제6권2호
• /
• pp.301-312
• /
• 1996

This study was performed to search a optimal analyzing method of cadmium in whole-blood. Cadmium was determined by graphite furnace atomic absorption spectrometry(GFAAS). We investigated the effect of ashing temperature on the absorbance of cadmium in a simple dilution(ten-fold) method with triton X-100 and matrix modifier methods treated with $NH_4H_2PO_4$(1 and 3%) and $Pd(NO_3)_2$(0.00l and 0.005%) as matrix modifier. We also compared the reported reference values of standard blood with values resulted from optimal analyzing conditions of this study. In case of a simple dilution method, when ashing temperature was set at $450^{\circ}C$, the absorbance of sample and background were $0.334{\pm}0.012$ and $1.382{\pm}0.245$, respectively. Background level was higher than the value(0.8) that can be corrected by $D_2$ background correction method. As ashing temperature was rised to $500^{\circ}C$, the absorbance of sample and background were $0.178{\pm}0.008$ and $0.711{\pm}0.223$ respectively. The higher ashing temperature($450^{\circ}C-650^{\circ}C$) was, the lower the absorbance of sample was. In case of a matrix modifier method with $NH_4H_2PO_4$(1 and 3%), when ashing temperature was rised from $500^{\circ}C$ to $650^{\circ}C$, the absorbance of sample slightly changed. The absorbances of sample at $600^{\circ}C$ were $0.230{\pm}0.017$ and $0.137{\pm}0.012$, respectively. These values were larger than that of simple dilution method. But the absorbance of background was higher than the level that can be corrected by $D_2$ method. In case of a matrix modifier method with $Pd(NO_3)_2$(0.001 and 0.005%), the absorbance of sample and background were higher than those of other methods and were stable and reproducible. When ashing temperature was over $550^{\circ}C$, the absorbance of sample was significantly decreased. In case of 0.005% $Pd(NO_3)_2$ carbon residue remained in graphite tube affected the absorbance of sample and background. From these results, We propose that in case of a simple dilution(ten-fold) method with triton X-100 ashing temperature must be maintained below $400^{\circ}C$. In order to diminish the absorbance of background, the alternative method is attenuation of injection volume or multiplication of dilution ratio. We recommend $Pd(NO_3)_2$ than $NH_4H_2PO_4$ as a matrix modifier. In case of a matrix modifier method with $Pd(NO_3)_2$ ashing temperature might be maintained below $550^{\circ}C$.

• 한국환경보건학회지
• /
• 제9권1호
• /
• pp.85-88
• /
• 1983

캄덴 카운티 청사에 있는 transformer에 화재가 난 후 건물내에 있는 60명의 혈야에서 PCB를 측정하였다. 화재가 발생한 건물내의 공기에서는 거의 검출되지 않았으나 transformer가 있는 방의 Swab Sample에서는 $52.6 \mug/cm^2$가 검출되었다. 건물을 재사용하기 전에 환기를 최대로 시킨후 다시 Swab Sample을 취했을때 12 Sample중 10주에서 PCB가 검출되지 않았다. 또한 혈야에서 PCB수준은 미검출에서 16ppb였으나 일반인에서도 69.2ppb까지 검출된것과 그밖에 17.6ppb까지 검출된 것으로 보아 화재후 PCB가 혈야중에서 증가했다는 증거는 없다고 본다. 이와 같이 혈청내에서 PCB가 증가하지 않은것은 화재후 즉시 청소와 환기를 실시한 결과로 본다.