• Journal of Korea Water Resources Association
• /
• v.48 no.1
• /
• pp.45-55
• /
• 2015

In this study, when seawall or harbor gate is installed for coastal disaster prevention, a two-dimensional water analysis in the bay is carried out to consider the flood amount of river inflow and effect of harbor gate. The Yeongsan river and the port Mokpo area are selcected for the study region. Then, by analyzing the hydraulic characteristics of flood flow of the Yeongsan river, we analysed the compatibility of the results in the two-dimensional hydrodynamic model. A tw-odimensional water analysis were conducted for the four cases considering whether a harbor gate is installed or not, and whether the inland water boundary condition is considered or not, also with open sea boundary condition. The results of the two-dimensional water analysis shows that water level change near the port Mokpo area is mainly caused by the discharge of the estuary barrage of the Yeongsan river because the harbor gate was installed. In addition, it is revealed that the volume of reservoir created by the harbor gate and the estuary barrage is too much small compared to the volume of the discharge from the Yeongsan river. Therefore, when the harbor gate is installed in the open sea, we concluded that a flexible management between the harbor gate and the estuary barrage of the Yeongsan river is required. A initial water level of the bay and outflow from the harbor gate are proposed for disaster prevention in the coastal area of port Mokpo.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2D
• /
• pp.137-145
• /
• 2012

According to the National Police Agency, the total number of traffic accidents which occurred in 2010 was 226,878. Intersection accidents accounts for 44.8%, the largest portion of the entire traffic accidents. An research on the signalized intersection is constantly made, while an research on the unsignalized intersection is yet insufficient. This study selected traffic volume, road width, and sight distance as the input variables which affect unsignalized intersection accidents, and number of accidents as the output variable to build a model using ANFIS(Adaptive Neuro-Fuzzy Inference System). The forecast performance of this model is evaluated by comparing the actual measurement value with the forecasted value. The compatibility is evaluated by R2, the coefficient of determination, along with Mean Absolute Error (MAE) and Mean Square Error (MSE), the indicators which represent the degree of error and distribution. The result shows that the $R^2$ is 0.9817, while MAE and MSE are 0.4773 and 0.3037 respectively, which means that the explanatory power of the model is quite decent. This study is expected to provide the basic data for establishment of safety measure for unsignalized intersection and the improvement of traffic accidents.

• Korean Journal of Ecology and Environment
• /
• v.50 no.1
• /
• pp.116-125
• /
• 2017

Alpine plants with a scarcity of pollinators in harsh environments have been believed to undergo selfing for reproductive assurance; however, contradictory evidence is also available. Snowmelt regimes in alpine areas function to change life history characteristics of alpine plants such as flowering time and duration; yet the effects of snowmelt regimes have never been tested in alpine plants in Korea. This study was conducted to investigate the dichogamy, mating systems, and flowering characteristics of Megaleranthis saniculifolia populations [early and late snowmelt plots (ESP and LSP, respectively)] in a subalpine area of Sobaeksan Mountain in Korea. M. saniculifolia exhibited incomplete protogyny in that despite early maturation of pistils, maturation times of pistils and stamens within flowers were partly overlapped. Control and hand-outcrossing treatments produced significantly higher number of follicles and seeds per flower than autonomous and hand-selfing treatments. Based on the aggregate fruit set, the auto-fertility index (AI) and self-compatibility index (SI) were 0.33 and 0.50, respectively. Snowmelt occurred 10 days earlier in ESP than in LSP, thereby ESP and LSP showed distinct differences with regard to flower longevity and season, but showing no difference in peak flowering dates. We concluded that M. saniculifolia is an incomplete protogynous and largely outcrossing plant requiring pollinator service. Temporal variation in snowmelt time and subsequent changes in flowering characteristics under climate change may further threaten the population persistence of M. saniculifolia which has already been designated as endangered species in Korea.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.556-559
• /
• 2009

"Hongso" was originated from a cross between "Yoko" and "Hongro" in NIHHS, RDA, in 1989. "Hongso" was preliminarily selected in 2002 for its high fruit quality. After regional adaptability test at five sites from 2003 to 2006 as "Wonkyo Ga-30" it was finally selected in 2006. Optimum harvest time is early September which is similar to that of "Hongro". Fruit shape is globose conical and skin color is light red. Mean fruit weight is 295g and soluble solids content is 14.1oBrix. Fruits acidity is 0.34%, which is higher than that of "Hongro"(0.23%). It has a good taste for harmony of sugar and acidity. Storability is 3 weeks in room temperature. It is apt to russet on fruit skin. It is susceptible to Bitter rot. "Hongso" has a good cross compatibility with major cultivars such as "Fuji", "Hongro" and "Tsugaru". Tree habit is semi-spreading and tree vigor is weak. "Hongso" is high-density cultivation type cultivar, because it has a precocity, spur-type.

• Journal of Korea Port Economic Association
• /
• v.34 no.3
• /
• pp.159-182
• /
• 2018

The purpose of this study is to increase the competitiveness of big data in the maritime port organization, by understanding the expected performance and the intention to accept and use big data. In the empirical analysis of factors affecting the intention to use the big data technology for maritime port organizations, the variables employed are based on the Technology Organization Environment(TOE) and Diffusion of Innovations(DOI) theories, which are related to the acceptance of information and communication technologies. To achieve the objective of this study, an empirical analysis was conducted; this analysis targeted the personnel involved in the department of strategic planning and information technology in the related field. We set up eight hypotheses to examine the relevance between variables having three characteristics-technology, organization, and environmental characteristics. The empirical results are summarized as follows. First, it was seen that the technology characteristic, including relative advantage, complexity, and compatibility, has a significant effect on the expected performance. Second, the top management support of the organization characteristic has a significant effect, but the firm size of this characteristic has no significant effect on the expected performance. Third, the competitive pressure of the environment characteristic has a positive effect on the expected performance, while the regulatory support has no significant effect. Finally, the expected performance has a significant effect on the intention to use big data.

• Journal of Digital Convergence
• /
• v.19 no.12
• /
• pp.29-42
• /
• 2021

As the low fertility intensifies in Korea, this study investigated fundamental differences between the government's low fertility policy and public perception of it. To this end, we selected four times 'Aging Society and Population Policy' documents and news comments for two weeks immediately after announcement of the third and fourth Policy as analysis targets. Then we conducted word frequency analysis, co-occurrence analysis and CONCOR analysis. As a result of analyses, first, direct childcare support during the first and second periods, and a social structural approach during third and fourth periods were noticeable. Second, it was revealed that both policies and comments aim for the work-family compatibility in 'parenting'. Lastly it was showed public interest in environment of raising children and the critical mind to effectiveness of the policy. This study is meaningful in that it confirmed the public perception using big data analysis, and it will help improve the direction for the future low fertility policy.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.5
• /
• pp.29-38
• /
• 2004

In this study, we investigated the thermal properties of corn-starch filled polybutylene succinate-adipate (PBS-AD) bio-composites. Thermal analysis (TA) is used to describe the analytical method for measuring the chemical property and weight loss of composite materials as a function of temperature. The thermal stability of corn-starch was lower than that of pure PBS-AD. As corn-starch loading increased, the thermal stability and degradation temperature of the bio-composites decreased and the ash content increased. It can be seen that the degree of compatibility and interfacial adhesion of the bio-composites decreased because of the increasing mixing ratio of the corn-starch. As the content of corn-starch increased, there was no significant change in the glass transition temperature (T_g) and the melting temperature (T_m) for the bio-composites. The storage modulus (E') and loss modulus (E") of the corn-starch flour filled PBS-AD bio-composites were higher than those of PBS-AD, because of the incorporation of corn-starch increased the stiffness of the bio-composites. At higher temperatures, the decreased storage modulus (E') of bio-composites was due to the increased polymer chain mobility of the matrix polymer. From these results, we can expect that corn-starch has potential as a reinforcing filler for bio-composites. Furthermore, we recommend using a coupling agent to improve the interfacial adhesion between corn-starch and biodegradable polymer.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.264-271
• /
• 2023

In this study, ASCO^Ⓡ SLES-430 surfactant was synthesized by adducting 3 moles of ethylene oxide and 1 mole of propylene oxide to lauryl alcohol followed by a sulfation process, and the structure of the synthesized ASCO^Ⓡ SLES-430 was elucidated by performing FT-IR, ¹H-NMR and ¹³C-NMR analyses. Interfacial properties such as critical micelle concentration, static surface tension, emulsification index, and contact angle were measured, and environmental compatibility indices such as oral toxicity and skin irritation were also estimated for ASCO^Ⓡ SLES-430. Both results were compared with ASCO^Ⓡ SLES-226 and ASCO^Ⓡ SLES-328 SLES surfactants possessing 2 moles and 3 moles of ethylene oxide, respectively. In particular, both foaming ability and foam stability were evaluated for ASCO^Ⓡ SLES-430 and compared with ASCO^Ⓡ SLES-226 and ASCO^Ⓡ SLES-328, which have been widely used in detergent products, in order to test the potential applicability of ASCO^Ⓡ SLES-430 in detergent product formulation for a small capacity built-in washing machine.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.859-869
• /
• 2008

These days, almost every industry's production line has become automatic and this phenomenon brought a lot of benefits such as increase in productivity and economical effect, assurance in industrial safety, better quality and compatibility. However, unlike industrial production line, in construction industry, automation has number of barriers like uncertainty incidents and intellectual judgment to make ability to make solution out of it. Therefore construction industry is still demanding use of construction machine through labor. Due to this matter operational labor in construction industry is aging and fading. To solve these problem, in developed nations like Europe, US or Japan are keep researching for the automation in construction and road pavement, strengthening and some other simple operations have been worked through automation but in civil engineering site, automation research is still low despite of its importance in constructional site. For automating civil engineering operation, effective operational plan have to be set by analyzing ground information acquainted. If skillful worker apply heuristics, trial & error can be reduced with increased safety and the effective work plan can be established. Hence, this research will introduce Intellectual Task Planning System for Intelligent Excavating System's effective work plan and heuristics applied in each steps.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2A
• /
• pp.281-288
• /
• 2008

The Prestressed Concrete (hereinafter PSC) box girder bridges with corrugated steel webs have been drawing an attention as a new structure type of PSC bridge fully utilizing the feature of concrete and steel. However, the previous study focused on the shear buckling of the corrugated steel web and development of connection between concrete flange and steel web. Therefore, it needs to perform a study on the torsional behavior and develop the rational torsional analysis model for PSC box girder with corrugated steel web. In this study, torsional analysis model is developed using Rausch's equation based on space truss model, equilibrium equation considering softening effect of reinforced concrete element and compatibility equation. Validation studies are performed on developed model through the comparison with the experimental results of loading test for PSC box girder with corrugated steel webs. Parametric studies are also performed to investigate the effect of prestressing force and concrete strength in torsional behavior of PSC box girder with corrugated steel web. The modified correction factor is also derived for the torsional coefficient of PSC box girder with corrugated steel web through the parametric study using the proposed anlaytical model.