• Journal of The Korea Institute of Healthcare Architecture
• /
• v.19 no.3
• /
• pp.21-28
• /
• 2013

Purpose: General hospital in korea is getting large-scaled, specialized and upgraded. So, nursing unit of race track type has been advanced along with a spatial organization, building equipment and environmental approach. This study is to search the guidelines for renovation of nursing unit with race track type in the case of K university hospital in Daejeon. Methods: 9 cases of recently opened general hospital has been analyzed for spatial and environmental design solution. Questionnaires and interviews about user needs of nursing staff, patient and visitors, have been conducted for a nursing care system and facility of nursing units in K university hospital. Results: The user needs are represented as followings. Center core public zone in each floor plan and center core nursing station and supporting areas in nursing unit are good for an adjacency and separation of spatial organization. Toilet of group patient room is necessary to equip for easy, safe and infective aspects, and so toilet install will decrease the patient number and increase the nursing care service. Hall type of station front is good for visibility and observation. It is appropriate to renovate into south facing group patient room for privacy, enough space for nursing care facility and supporting area, enough width of door to move portable medical equipment, room for medical doctor and practical student, noise absorbing of day room. Implications: Upgrading the nursing care service and facility equipment is necessary to reflect the user needs and cooperate with hospital management.

• Journal of Animal Environmental Science
• /
• v.2 no.1
• /
• pp.13-25
• /
• 1996

This study was conducted to analyze the technological levels of the domestic industries manufacturing the machinery and equipment for livestock production facilities and to lay out a scheme for upgrading the technical improvement. The results of this study are as follows : 1 . According to the study results, the technological levels of the domestic industries for livestock production facilities lag far behind those of the advanced countries in this field. 2. It was found that the ratio engaged in the areas of R&D was 10.7% and lower than that engaged in the other areas and the ratio of junior college graduated engineers engaged in the areas of research and design was 44.4%. Therefore, the amounts of investment for the areas of R&D and design should be increased. 3. In the design area, it was found from the study that the most weakness technologies which should be developed in near future were the universal harvester and the mechanical designing. Therefore, the multipurpose universal harvester suitable to the domestic farmland conditions should be developed and strength, hardness, and durability of materials in the mechanical designing should be improved.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.51-56
• /
• 2019

$H_2S$ is a detrimental impurity that must be removed for upgrading biogas to biomethane. This study investigates an economic method to mitigate $H_2S$ content, combining scrubbing and aeration. The desulfurization experiments were performed in a laboratory apparatus using EDTA-Fe or landfill leachate as the catalyst and metered mixture of 50-52% (v/v) $CH_4$, 32-33% (v/v) $CO_2$ and 500-1,000 ppmv $H_2S$ balanced by $N_2$ using the C city landfill gas. Dissolved iron concentration in the liquid medium significantly affected the oxidation efficiency of sulfide. Iron components in landfill leachate, which would be available in a biogas/landfill gas utilization facility, was compatible with an external iron chelate. More than 70% of $H_2S$ was removed in a contact time of 9 seconds at iron levels at or over 28 mM. The scrubbing-aeration process would be a feasible and easy-to-operate technology for biogas purification.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.57-66
• /
• 2019

This study carried out on-site investigation and precision monitoring to prepare proper design and operation technical guidelines for the use of bio gas in organic waste resources (fertilizing urine, food waste, food waste, food waste, etc.). According to the government's mid- and long-term policy on bio gasification, the expansion of waste resources is actively being pushed forward. However, facilities that use the biogas produced for urban gas and transportation are still under-efficient. Precision monitoring was carried out for biogasification facilities of organic waste resources in seven locations nationwide. When the results of precision monitoring were summarized with the four-season average, the efficiency analysis of each organic waste resource showed that the organic breakdown rate was 66.3% on average on VS basis. Analysis of biogas characteristics before and after pretreatment revealed that the $H_2S$ average of the entire facility was measured at 949.7 ppm using iron salts and desulfurization (dry, wet) and that the quality refining facility shearing and rear end was 29.0 ppm and 0.3 ppm. The methane content was found to be reduced by 65.6% at the rear of the fire tank, 63.5% at the back and 97.5% at the rear.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.67-73
• /
• 2019

In this study, to optimize the production and utilization of biogas for organic waste resources, the precision monitoring of on-site facilities and the energy balance by facility were analyzed, and the solutions for field problems were investigated, and the design and operation guidelines for pretreatment facilities and generators were presented. Gas pre-treatment is required to solve frequent failures and efficiency degradation in operation of high quality refining facilities, and processing processes such as desulfurization, dehumidification, deoxidization, dust treatment, volatile organic compounds, etc. Since these processes are substances that are also eliminated from the high-quality process, quantitative guidelines are not presented in the gas pretreatment process, but are suggested to operate during the processing process as a qualitative guideline. In particular, dust, siloxane, and volatile organic compounds are the main cause of frequent failure of high-quality processes if they are not removed from the gas pretreatment process. Design of the biogas high-quality process. The operation guidelines provide quality standards [Methane content (including propane) of 95% or more] with 90% or more utilization of the total gas generation, two systems, and a margin of 10% or more. It also proposed installing gas equalization tank, installing thermal automatic control system for controlling equalization of auxiliary fuel, installing dehumidification device at the back of high quality for removing moisture generated in the process of gas compression, installing heat-resisting facilities to prevent freezing of facilities in winter and reducing efficiency, and installing membrane facilities in particular.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.4
• /
• pp.357-365
• /
• 2020

While numbers of apartment housing are continually rising in the domestic housing construction industry, apartment contractors are currently developing plane models, upgrading facilities, and relevant technology, and investing much efforts to meet the higher demands of consumers. However, the construction process of apartment housing involves the intricate properties of the construction industry such as materials, workforce, equipment, weather, and unpredictable situations. If any of these factors becomes discordant and results in interference and interruption of the construction process, then defects, both functional and aesthetic, are likely to occur due to errors in the plan of industry organizers and constructors. Therefore, this research identifies the types of defects in an apartment construction project and analyzes their relative importance. Firstly, this research reviews the previous research trends and will reduce the needs of this research. Afterward, defect repair costs corresponding to the different defect types are calculated by applying results of the research and performing frequency analysis on defect types included in 'Tenant preliminary research' on apartments constructed by Company A. As a result of analyzing the importance of defect type, the top six activities, including tile, floor, paper hanging, PL window, cabinetry, and kitchen cabinet, are found to be of high importance, and the top six activities in question need of repair and management of defects first. The results of this study will help establish a plan to initially respond to such problems as refusal to move in and filing a defect suit against delay in repairing defects.

• Journal of Environmental Policy
• /
• v.8 no.4
• /
• pp.25-36
• /
• 2009

The Total Pollutant Load Management System(TPLMS) in the Han River basin is being changed from a voluntary to a mandatory system. Accordingly, this study suggests directions and priorities for research that can support implementation of TPLMS through an objective approach that deploys gap analysis and analytic hierarchy processes (AHP). Gap analysis indicated that TPLMS in Korea is still focused on compliance with regulations, and that implementation of TPLMS is still in its early stage. Improvements are thus needed in flexibility and effectiveness, including introduction of emissions rights trading, and upgrading to a renewable emissions permit system. The AHP study indicated that R&D will need to proceed in parallel in multiple areas to improve systems and resolve scientific uncertainties. Balanced R&D will be needed in both the institutional and technical groups. Subgroup analysis indicated that developing a reasonable process to establish water quality management targets is of the highest priority in the institutional group. In the technical group, higher priority will need to be given to improving model reliability and developing innovative pollution load reduction technologies.

• Economic and Environmental Geology
• /
• v.49 no.3
• /
• pp.213-224
• /
• 2016

Non-conventional resource and alternative energy were researched for predicting oil peak. In this study, one of many non-conventional resources, specifically oil-sands, was investigated due to the increasing interest of oil-sands plant modularization in permaforst areas for reducing the construction periods through modular transportation while limiting local construction workers. Hence, tehcnological trends were analyzed for oil-sand plant modularization. Data used were between 1994 and 2015 for patent analysis while targets included Korea, US, Japan, Europe and Canada. Technology classification system consisted of mining, steam assisted gravity drainage(SAGD), separation/upgrading/tailors ponds, module design/packaging, module transportation and material/maintenance. Result of patent analysis, patent application accounts 89% in US and Canada. The main competitive companies were Shell, Suncor and Exxon-mobil. Unlike other oil developments, oil-sands have a long-term stable production characteristic, hence, it is important to ensure the competitiveness of oil-sands for obtaining a patent in the long run.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.4
• /
• pp.391-398
• /
• 2011

SHS(Ship-Handling Simulator) is virtual generation of vessel traffic situation under various environmental conditions. Recent, with the introduction of MSA(Maritime Safety Audit), SHS is being used as a key facility to determine the safety of navigation. However, the current audit techniques specified in the implementation guidance of MSA have been prepared by generalizing common procedures and evaluation methods used by institutions operating simulator systems. Therefore, they need to be reviewed and supplemented. This study analyzed the adequacy of current audit techniques based on the limitations and problems, then suggested the advanced scheme of SHS such as standardization of ship models, standard manoeuvring and evaluation method. The results of this research will contribute to improving the quantification and reliability of audit techniques used in the MSA as well as upgrading of the simulator system.

• Archives of design research
• /
• v.5 no.1
• /
• pp.7-20
• /
• 1992

Since 80th, in the monetary markets due to the escalation of creditable promptness dealing of financial goods, Korea monetary business has been confronted with structual contradictions. The first like a men power reduction, inorder to meet and satisfying with cost reduction policy of the holding firms and secondly, escalation and expention of business networks or facilities inorder to meet and satis~'ing with customers continuously seeking for prompt, acurate, and helpfulness service nearly like one similar to a door to door service. Accordingly, the firms eventually poured mere sweaty money into procuring such devices for upgrading. On the contrary, however, regardless the escalation monetary expenditure may be, inorder to promote quality of the same devices are keen necessary because present days customer groups were tended to receives ample service almost like door to door service without moving too$$\mu$h apart from the immediate spot where they belongs tl or veryspot of where actually they spend instead of deep consideration of natures, quality or sttractiveness of service medias what they can received from. Under the present circumstance, the financial business firms, however, would highly suffering and recei\ulcornerves pressures from imblalance natures ofincoming and out go of the business budget due to excessive inc1ease of managerial expences. For these reasons, therefor, in order to solves, compensates, improves, and developes most effective fina\ulcornerncial service for customers can use under most pleasant environment, the establishment of adequate standardization of such service devices based on the foregoing environmental circumstances. This analytical study, therefor, mainly aimed and emphasized based on pre- estimatimation of proper de\ulcornervlopment and use of the unattended servicing devices such as Cash Dispenser and Auto Teller Machine bygeneralization, automating. and innovation of design to meet compactness and door to door like convenient service for customers which can be achieved by performing constant comparative analysis and continual study toward development of such devices those of which produced by Five (5) major domestic producers aro~nd the country.