• Journal of Korean Society on Water Environment
• /
• v.26 no.1
• /
• pp.160-167
• /
• 2010

In this research, the performance evaluation between an alternating type process and a recirculating type process was investigated by using mathematical models. The Advanced Phase Isolation Ditch (APID) process and the $A^2/O$ process were selected the target processes of the alternating type and recirculating type, respectively. For more quantitative evaluation, 5 performance indexes which included economy and energy efficiency as well as effluent quality were used, and various disturbance conditions of influent were given to the process models. As simulation results, the APID process which had the specific operation modes to use the organic matter in influent effectively showed higher efficiency of denitrification than the $A^2/O$ process. In the case of effluent TSS, the $A^2/O$ process that the retention time in reactors could be maintained stably was more effective than the APID process. In the cases of various disturbance condition, although it was identified that both two processes had similar effluent quality, the sludge production of the $A^2/O$ process showed lower than that of the APID process while the APID process showed higher energy efficiency.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.2
• /
• pp.19-37
• /
• 2021

It is essential that the evaluation of official development assistance (ODA) projects is conducted based on empirical research for the performance and improvement of the project. This study intended to quantitatively figure out the actual status and performance of ODA projects. The performance of the Rumpin Seed Source and Nursery Center project implemented by the KOICA was evaluated in items of relevance, efficiency, effectiveness, impact, sustainability, which are OECD Development Assistance Committee(DAC) evaluation criteria. From August 26, 2019 to August 29, 2019, a survey was conducted on 50 visitors and 54 stakeholders of the Rumpin Seed Source and Nursery Center. Through on-site survey, problems in the donation project and operation in Indonesia were identified and measures for improvement was grasped. As a result of the study, the value scored by OECD DAC evaluation criteria of the Rumpin Seed Source and Nursery Center project based on the Economic Development Cooperation Fund(EDCF) evaluation grade was evaluated as a very successful class in all items. The average score of the recognition question was 4.08 points for visitors and 4.08 points for stakeholders, and the average score for the satisfaction question was 4.37 points for visitors and 4.11 points for stakeholders, which were high overall in both groups. The main factor that affects the project awareness of the visitors was the fact that the Rumpin Seed Source and Nursery Center was created based on Korean technology, and it was confirmed that Indonesia's own items related to similar projects had a great influence on the project satisfaction. In the case of stakeholders, project support in Korea affected their recognition, and it was found that relevance, efficiency, effectiveness items had the greatest impact on the level of project satisfaction of stakeholders derived from the DAC individual evaluation results. Efforts are required to increase the main factors by reflecting the results of each item and to preserve and maintain the project. This study is significant in determining the performance of the ODA project based on empirical data, and it is believed that it can be used as basic data for supplementing and strengthening the project in the future.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.5
• /
• pp.59-67
• /
• 2018

G-SEED's evaluation of existing buildings is an important point because the energy consumption and CO2 emissions of existing buildings are continuously increasing due to the aging of buildings over time. However, as G-SEED certification is concentrated on new buildings and the standards are not yet available, we will make improvements to evaluate the existing buildings of G-SEED. In order to improve G-SEED for EB, two research procedures were carried out. First, LEED EBOM and LEED for NC compare and analyze evaluation items and methods, and LEED EBOM focuses on evaluation of existing buildings. Second, we analyzed the certification evaluation contents of eight domestic LEED EBOM accredited buildings and obtained items that can be applied or need to be applied when revising G-SEED for EB. LEED EBOM is focused on improving the performance and utilization of data that track and manage the energy and environmental effects of building operations. As a result of the case analysis, the evaluation of G-SEED for EB requires quantitative evaluation items such as environmental management of buildings, energy performance status of building, improvement plan and improvement of performance according to tracking value. Although G-SEED for EB is not structured yet and there are few cases of certification, it is expected that quantitative evaluation of existing buildings will be made through continuous research.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.5
• /
• pp.37-45
• /
• 2007

WTO/TBT requires that, for technical regulations affecting trade, technical regulatory requirements must be specified where possible in terms of performance rather than design or descriptive characteristics. The movement which made "performance" a keyword in landscape architecture was activated in Japan, one of the leading counties in performance-based regulatory system(PBRS). The Japanese recent movement of systematization activity on performance-based standards and specifications was reviewed and operational applications for performance-based regulatory system in South Korea are summarized as follows: 1. The establishment of performance standards that can be properly evaluated by assessment indicators is necessary in cases when quantitative evaluation is difficult. 2. As a preparation for PBRS, a brief procurement system by technical proposal for the landscape design and construction is necessary. 3. As a preparation for PBRS, activation of an environmental performance evaluation on experimental construction is necessary. 4. As a preparation for PBRS, a certification system of environmental performance on various landscape construction methods is necessary. 5. The Private Finance Initiative Project is the most similar to PBRS therefore, activation of the Private Finance Initiative Project is necessary in landscape architecture projects for park rehabilitation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.2
• /
• pp.79-87
• /
• 2016

As 3D geospatial information is demanded, terrestrial laser scanners which can obtain 3D model of objects have been applied in various fields such as Building Information Modeling (BIM), structural analysis, and disaster management. To acquire precise data, performance evaluation of a terrestrial laser scanner must be conducted. While existing 3D surveying equipment like a total station has a standard method for performance evaluation, a terrestrial laser scanner evaluation technique for users is not established. This paper categorizes and analyzes error sources which generally occur in terrestrial laser scanning. In addition to the prior researches about categorizing error sources of terrestrial Laser scanning, this paper evaluates the error sources by the actual field tests for the smooth in-situ applications.The error factors in terrestrial laser scanning are categorized into interior error caused by mechanical errors in a terrestrial laser scanner and exterior errors affected by scanning geometry and target property. Each error sources were evaluated by simulation and actual experiments. The 3D coordinates of observed target can be distortedby the biases in distance and rotation measurement in scanning system. In particular, the exterior factors caused significant geometric errors in observed point cloud. The noise points can be generated by steep incidence angle, mixed-pixel and crosstalk. In using terrestrial laser scanner, elaborate scanning plan and proper post processing are required to obtain valid and accurate 3D spatial information.

• Journal of Korean Society on Water Environment
• /
• v.34 no.6
• /
• pp.569-578
• /
• 2018

To minimize the negative alterations in hydrologic and water quality environment in urban areas due to urbanization, Low Impact Development (LID) techniques are actively applied. In Korea, LID facilities are classified as Non-point Pollution Reduction Facilities (NPRFs), and therefore they are evaluated using the performance evaluation method for NPRFs. However, while LID facilities are generally installed in small, distributed configuration and mainly work with the infiltration process, the existing NPRFs are installed on a large scale and mainly work with the reservoir process. Therefore, some limitations are expected in assessing both facilities using the same method as they differ in properties. To solve these problems, in this study, a new method for performance evaluation was proposed with focus on bio-retention LID facilities. EPA SWMM was used to reproduce the hydrologic and water quality phenomena in study area, and SWMM-LID module used to simulate TP interception performance by installing a bio-retention cell under various conditions through long-term simulations. Finally, an empirical formula for Load Capture Ratio (LCR) was derived based on storm water interception ratio in the same form as the existing method. Using the existing formula in estimating the LCR is likely to overestimate the performance of interception for non-point pollutants in the extremely low design capacity, and also underestimate it in the moderate and high design capacity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.13-16
• /
• 2006

Recently, ITS has been deployed nationwide and at the same time, the demand for the better accuracy and higher quality of traffic information has been increased. Yet, there is no standard evaluation methods or evaluation equipments to verify ITS device's performance, being unable to secure reliable traffic data. In this study, the standard evaluation methods for ITS device's performance are studied by reviewing other nations' evaluation methods and the evaluation system is developed.

• Journal of the military operations research society of Korea
• /
• v.32 no.1
• /
• pp.51-72
• /
• 2006

There are many occasions that the performance of a corps is influenced not only by its own efforts but by the commander of the next higher unit in a vertical organizational structure. When the direction of the commander in the next higher organization is different from that of the actual evaluation agency, the unit under evaluation may get rated lower than what it should deserve. This study suggests an alternative method to evaluate the performance of military units in the situation that there exist critical environmental factors which affect the performance. This method employes DEA, a non parametric method, and Constrained Canonical Correlation Analysis(CCCA), a parametric method which is used to estimate a efficient frontier with multiple dependent variables and constraints. This article also exploits a set of categorical environmental variables in the CCCA to improve the fairness of performance evaluation. It is shown that the introduction of the categorical variables helps evaluating the true performance of individual units such as battalions subordinated to different next higher commanders.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.1
• /
• pp.205-212
• /
• 2002

The deterioration rate of concrete structures in urban area is accelerated due to rapid urbanization and environmental pollution. Repair materials and methods newly introduced in Korea should be investigated whether they are appropriate for the urban environment in Korea. The creek concrete structures are exposed in severe environmental condition than others. Based on these background in mind, the study is focused on evaluation of performance on repair materials used to rehabilitate creek concrete structures. To evaluate the performance of repair materials, four kinds of repair materials were selected based on polymer emulsion. This experimental study was conducted on fundamental performance such as setting time, compressive strength, bending strength, bonding strength, thermal expansion coefficient, and durability performance such as chloride diffusion, carbonation, chemical attack, and steel corrosion rate. On the basis of this study, the optimal repair material which is proper to the environment condition can be selected and service life of creek concrete structures can be extended. As a result, the life cycle cost can be reduced and the waste of material resources will be cut down.

• Journal of Animal Science and Technology
• /
• v.65 no.6
• /
• pp.1180-1193
• /
• 2023

Most carcass and meat quality traits are moderate to highly heritable, indicating that they can be improved through selection. Genetic evaluation for these types of traits is performed using performance data obtained from commercial and progeny testing evaluation. The performance data from commercial farms are available in large volume, however, some drawbacks have been observed. The drawback of the commercial data is mainly due to sorting of animals based on live weight prior to slaughter, and this could lead to bias in the genetic evaluation of later measured traits such as carcass traits. The current study has two components to address the drawback of the commercial data. The first component of the study aimed to estimate genetic parameters for carcass and meat quality traits in Korean Hanwoo cattle using a large sample size of industry-based carcass performance records (n = 469,002). The second component of the study aimed to describe the impact of sorting animals into different contemporary groups based on an early measured trait and then examine the effect on the genetic evaluation of subsequently measured traits. To demonstrate our objectives, we used real performance data to estimate genetic parameters and simulated data was used to assess the bias in genetic evaluation. The results of our first study showed that commercial data obtained from slaughterhouses is a potential source of carcass performance data and useful for genetic evaluation of carcass traits to improve beef cattle performance. However, we observed some harvesting effect which leads to bias in genetic evaluation of carcass traits. This is mainly due to the selection of animal based on their body weight before arrival to slaughterhouse. Overall, the non-random allocation of animals into a contemporary group leads to a biased estimated breeding value in genetic evaluation, the severity of which increases when the evaluation traits are highly correlated.