• Journal of the Korean housing association
• /
• v.17 no.6
• /
• pp.27-35
• /
• 2006

The purpose of this study is to analyze about perception and preference degree of resident's for environmental moulding. We will find factors effected to utilization of residents. So we should extract characteristics in the way of an association factors. The analysis result of this study is as follows: First, We could know that they consider form and establishment position to be the most important factors a using environment moulding in a housing complex. Second, it is high that preference degree at environmental moulding of figurative shape located in front of main entrance harmonized with gardening. Third, it is high that preference degree at environmental moulding of abstract shape located in front of a pray ground. Finally, environment moulding of mixing form appeared highest preference degree at parking lot entrance location. As valued result of this thesis, the result of environment moulding and surrounding as harmony form is going to utilize to basic to establish in a housing complex. furthermore, This research increase dwelling peoples' satisfaction as well as arrangement of environmental moulding and is expected that is going to give affirmative effect that can enhance quality of a housing complex.

• Journal of Fashion Business
• /
• v.18 no.3
• /
• pp.73-90
• /
• 2014

Paper, once known and used only as a medium for printing or handicrafts, is now being used in new fields including artistic clothing, and an environment-friendly material for fashion, while the functionality of its formative characteristics and esthetics have been newly highlighted. On this basis, this study performed a content analysis of paper couture and categorization of types of paper modeling techniques based on 904 paper couture submitted to paper fashion shows, exhibitions and contest exhibits from 2001 to 2013. Analysis results showed that paper textile types were most common at 86.64%, while techniques using laminating, bonding, overlapping or paper as-is represented 62.17%. Expressive techniques in which paper was cut or torn and attached to paper clothing was 11.62%, paper folding was 5.75%, drawing and coloring 4.65%, and finally, paper cutting was 2.65%. Meanwhile, among paper modeling techniques using paper yarn textiles, a paper weaving technique was 6.75%. Moreover, other techniques in which paper modeling techniques or subsidiary clothing was blended were 3.65%, and Dak peeling textiles were 1.33%. Paper paste moulding textiles types represented 1.44%, above all papier $m{\hat{a}}ch{\acute{e}}$ techniques of 0.55% and creasing and holding techniques were 0.88%. Paper is sufficient to express the artists' creativity as well as having qualities as an artistic medium, such as variability through combined use with other materials, variation in form, suitability for reuse of waste paper, and environmental friendliness. Also, various paper modeling techniques can be blended with textiles for a generalized technology that overcomes the limits of paper and textiles.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.2
• /
• pp.7-12
• /
• 2012

In order to cope with the requirements of smaller patterns, larger surfaces and lower costs in the fields of displays, optics and energy, greater attentions are now being paid to the development of micro-pattern machining technology. Compared with flat moulds, large drums with micro patterns (roll moulds) have the advantages of short delivery, ease of manufacturing larger surfaces, and continuous moulding. This paper introduced the machining process technology of the roll moulds for display industry. The environmental effects were discussed and the importance of temperature maintenance was experimentally emphasized. The real time monitoring system for micro machining was introduced. A commercial solution was used to simulate the micro grooving and a deformation model of micro machined pattern was finally introduced.

• Economic and Environmental Geology
• /
• v.16 no.3
• /
• pp.149-161
• /
• 1983

Fuller's earth deposits from Miocene sedimentary sequences in Gyeong Sang-do contain up to 95% Ca-montmorillonite accompanied by cristobalite, clinoptilolite, mordenite, quartz, feldspar and X-ray amorphous material. Differential thermal analysis, infrared and electron microscopic data are given for the montmorillonite component. The ease with which the exchangeable calcium of the montmorillonite could be replaced by sodium (to give a product with properties similar to that of a bentonite) was monitored by the Atterberg liquid limit test. Some samples tested as possible binders for foundry moulding sands gave results that compared favourably with material currently being used for this application. Many of the samples also met the OCMA specifications for clays used in drilling muds.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.326-330
• /
• 2004

Thermosetting matrix composites have disadvantages in terms of moulding time, repairability and manufacturing cost. Thus the high-performance thermoplastic composites to eliminate such disadvantages have been developed so far. As a result of environmental and economical concerns, there is a growing interest in the use of thermoplastic composites. However, since their mechanical properties are very sensitive to the environment such as moisture, temperature etc., those behaviors need to be studied. Particularly the temperature is a very important factor influencing the mechanical behavior of thermoplastic composites. The effect of temperature have not yet been fully quantified. Since engineering applications of reinforced composites necessitate their fracture mechanics characterization, work is in progress to investigate the fracture and related failure behavior. An approach which predicts the tensile strength was perpormed in the tensile test. The main goal of this work is to study the effect of temperature on the result of tensile test with respect to GF/PE composite. The tensile strength and failure mechanisms of GF/PE composites were investigated in the temperature range $60^{\circ}C\;to\;-50^{\circ}C$. The tensile strength increased as the fiber volume fraction ratio increased. The tensile strength showed the maximum at $-50^{\circ}C$, and it tended to decrease as the temperature increased from $-50^{\circ}C$. The major failure mechanisms was classified into the fiber matrix debonding, the fiber pull-out, the delamination and the matrix deformation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.2
• /
• pp.158-163
• /
• 2003

Thermosetting matrix composites have disadvantages in terms of moulding time, repairability and manufacturing cost. Thus the high-performance thermoplastic composites to eliminate such disadvantages have been developed so far. As a result of environmental and economical concerns, there is a growing interest in the use of thermoplastic composites. However, since their mechanical properties are very sensitive to the environment such as moisture, temperature etc., those behaviors need to be studied. Particularly the temperature is a very important factor influencing the mechanical behavior of thermoplastic composites. The effect of temperature have not yet been fully quantified. Since engineering applications of reinforced composites necessitate their fracture mechanic characterization, work is in progress to investigate the fracture and related failure behavior. An approach which predicts the tensile strength was perpormed in the tensile test. The main goal of this work is to study the effect of temperature on the result of tensile test with respect to GF/PE composite. The tensile strength and failure mechanisms of GF/PE composites were investigated in the temperature range 6$0^{\circ}C$ to -5$0^{\circ}C$. The tensile strength increased as the fiber volume fraction ratio increased. The tensile strength showed the maximum at -5$0^{\circ}C$, and it tended to decrease as the temperature increased from -5$0^{\circ}C$. The major failure mechanism was classified into the fiber matrix debonding, the fiber pull-out, the delamination and the matrix deformation.