• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.165-172
• /
• 2017

High frequency squeal noise can be generated when a railroad vehicle runs a sharp curved section; this noise causes environmental complaints and excessive wear on the wheel and the railroad track. In this paper, curved squeal noise experiments on a commercial railway were carried out to investigate this phenomenon. The relationship of the squeal noise pressure level, the frequency characteristics, the railway running speed, and the modal behavior of the wheel were investigated. At the same time, the lateral motion of the wheel relative to the rail was captured using a video camera; wheel movement was calculated when the noise was generated. queal noise occurred at the highest level at the inner front wheel; this phenomena is considered to be related to the lateral vibration response characteristics of the wheel. It can be seen that the magnitude of this squeal noise is not directly related to the increase in vehicle speed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.828-840
• /
• 2014

There is a new evolution in technological advancement taking place called the Internet of Things (IoT). The IoT enables physical world objects in our surroundings to be connected to the Internet. For this idea to come to life, two architectures are required: the Sensing Entity in the environment which collects data and connects to the cloud and the Cloud Service that hosts the data. In particular, the combination of wireless sensor network for sensing and cloud computing for managing sensor data is becoming a popular intervention for the IoT era. The pharmaceutical cold chain requires controlled environmental conditions for the sensitive products in order for them to maintain their potency and fit for consumption. The monitoring of distribution process is the only assurance that a process has been successfully validated. The distribution process is so critical that anomaly at any point will result in the process being no longer valid. Taking the cold chain monitoring to IoT and using its benefits and power will result in better management and product handling in the cold chain. In this paper, Arduino based wireless sensor network for storage and logistics (land and sea) is presented and integrated with Xively cloud service to offer a real-time and innovative solution for pharmaceutical cold chain monitoring.

• Journal of Distribution Science
• /
• v.13 no.1
• /
• pp.27-33
• /
• 2015

Purpose - The ICT market in the EU is lagging behind that of the US; however, algorithm and software development within the EU have grown steadily, and they involve focusing on the creative cultural convergence conceptualized as part of Horizon 2020 and connecting neighboring markets in the EE and the Mediterranean region. It is essential to study the requirements to market the EU's creative ICT development in emerging industrial countries after examining its applicability in these countries. Research design, data, and methodology - This study deals with data pertaining to the EU's creative industry and competitive edge. The global cultural expansion of the EU facilitates a new concept involving not only low-cost IT products to enhance local cultural artifacts through R&D and the construction of efficient infrastructure services, but also information exchange with a realistic commercialization of the technology that can be applied for creative cultural localization. In the European industry, research on algorithms has been applied for the benefit of consumers. We investigated how the process is conducted in the EU. Results - Europe needs to adjust its economic structure to the local culture as part of IT distribution convergence. The convergence has been converted into a production algorithm with IT in the form of low-cost production. This is because there is an attempt to improve the quality of transport infrastructure, workforce availability, and the distribution of the distance to the local industries and consumers, using IT algorithms. Integrated into the manufacturing industry, based on the ICT infrastructure and solutions, smart localized regional clusters are formed with the help of grafting. Europe has own strategy to increase the number of hub-and-spoke cities. Europe is now becoming integrated, with an EPC system for regional cooperation rather than national competition in ICT technology. Europe has also been recognized in this study as changing the step-by-step paradigm for global competitiveness through new creative culture industries. Conclusions - As a result, there are several ways of converging with others through EU R&D intensity; therefore, the EU can be seen as successfully increasing marginal value, which is useful in developing a special industrial cluster or local cultural cities that create converged development by connecting people and objects with IT. In fact, when compared to the US, Europe has a strong culture and the car industries have a tendency to overshadow the IT industries with integration of services in IT distribution. Considering the rapid environmental changes, the convergence of IT services is likely to take place in Europe, similar to the pharmaceutical industry and the automotive industry. This requires a focus on human resources and automated systems management. The trend is to move away from low-wage industries, switched to key personnel centers of the local university-industry. EU emphasizes the creation of IT market demand in Europe involving local cultural convergence for marketing as the second step to strengthen the economic hub-and-spoke areas.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.2
• /
• pp.109-114
• /
• 2021

The characteristics of vibrational stress (shock and vibration) during transport and the possibility of damage to the packaged pears by functional PLA tray were investigated. And this study was conducted to analyze how environmental conditions by simulated transport environment affect quality factors such as weight loss (%) and soluble solid content (SSC, %), and firmness (bioyield strength, kPa) of packaged pears by PLA tray and Expanded PET foam pad (Group 1), EPE cushion cup pad and net (Group 2) for exporting. Pears with or without vibration stress were stored for 30 days at low temperatures (5 ± 0.8℃, 80 ± 5% relative humidity). There was the statistically significant difference (p ≤ 0.05) between pears with and without vibration stress for weight loss, soluble solid content, and firmness (bioyield strength) after 30 days storage. Vibration stress accelerated pear quality deterioration during storage, resulting in increased weight loss, soluble solids content, and reduced hardness. The firmness (bioyield strength) and weight changes of pears with PLA trays were smaller than those of conventional packaging box systems. It was determined that the firmness of agricultural products was a quality factor closely related to the storage period and that PLA could be applied.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.64-78
• /
• 2019

This paper explores key factors affecting taxi travel using global positioning system(GPS) data in Seoul, Korea, considering spatial dependence. We first analyzed the travel characteristics of taxis such as average travel time, average travel distance, and spatial distribution of taxi trips according to the time of the day and the day of the week. As a result, it is found that the most taxi trips were generated during the morning peak time (8 a.m. to 9 a.m.) and after the midnight (until 1 a.m.) on weekdays. The average travel distance and travel time for taxi trips were 5.9 km and 13 minutes, respectively. This implies that taxis are mainly used for short-distance travel and as an alternative to public transit after midnight in a large city. In addition, we identified that taxi trips were spatially correlated at the traffic analysis zone(TAZ) level through the Moran's I test. Thus, spatial regression models (spatial-lagged and spatial-error models) for taxi trips were developed, accounting for socio-demographics (such as the number of households, the number of elderly people, female ratio to the total population, and the number of vehicles), transportation services (such as the number of subway stations and bus stops), and land-use characteristics (such as population density, employment density, and residential areas) as explanatory variables. The model results indicate that these variables are significantly associated with taxi trips.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.88-97
• /
• 2020

In this study, the selected waste plastic waste logistics used for cement sintering were classified into two types through the process of sorting and crushing, analyzing the characteristics of each, and analyzing the correlation of the strength after cement manufacturing. The experimental variables were classified into soft and hard waste plastic waste, and the correlations between calorific value, chlorine, and moisture were analyzed. In addition, some of each waste was selected and melted, and the basic characteristics were evaluated by analyzing the structure and calorific value. The results of the experiment showed that it was evaluated that it is suitable to obtain a heat source by separating soft waste plastic wastes and sintering them with materials having similar properties. As a result of examining the wastes by strength after cement manufacturing, it was analyzed that the use of hard plastics greatly contributes to the compressive strength on the 1st and 28th, and the use of soft plastics contributes to the compressive strength on the 28th. However, these characteristics are evaluated by collecting only a part of the waste, and since the deviation of the waste occurs, continuous management is required, and a follow-up study on the environmental problems caused by the use of waste is required.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.3
• /
• pp.165-170
• /
• 2022

If petroleum- derived plastic like a bio-based plastic was degradation, awareness like a global warming and environmental disasters will be decreased. Plastic film was produced by adding ferric ions according to concentration by using a pro-oxidant in polyolefin resin. Changes in tensile strength, elongation, and molecular weight were evaluated according to the UV irradiation time. Increasing the amount of ferric ions resulted in more significant declines of physical properties, and also resulted in greater changes in molecular weight. After 100 hours of UV irradiation, tensile strength declined significantly in the film containing pro-oxidant as compared to the control. A similar effect was also observed in terms of elongation. The film containing pro-oxidant showed a 73.8% decrease in molecular weight after 100 hours of UV irradiation. The appropriate use of pro-oxidant can not only degrade plastic film but also control the time of degradation at the petroleum-derived plastic films. Further studies are necessary to investigate the conditions of plastic film degradation.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.30-31
• /
• 2009

Early detection of schedule delay in field construction activities is vital to project management. It provides the opportunity to initiate remedial actions and increases the chance of controlling such overruns or minimizing their impacts. This entails project managers to design, implement, and maintain a systematic approach for progress monitoring to promptly identify, process and communicate discrepancies between actual and as-planned performances as early as possible. Despite importance, systematic implementation of progress monitoring is challenging: (1) Current progress monitoring is time-consuming as it needs extensive as-planned and as-built data collection; (2) The excessive amount of work required to be performed may cause human-errors and reduce the quality of manually collected data and since only an approximate visual inspection is usually performed, makes the collected data subjective; (3) Existing methods of progress monitoring are also non-systematic and may also create a time-lag between the time progress is reported and the time progress is actually accomplished; (4) Progress reports are visually complex, and do not reflect spatial aspects of construction; and (5) Current reporting methods increase the time required to describe and explain progress in coordination meetings and in turn could delay the decision making process. In summary, with current methods, it may be not be easy to understand the progress situation clearly and quickly. To overcome such inefficiencies, this research focuses on exploring application of unsorted daily progress photograph logs - available on any construction site - as well as IFC-based 4D models for progress monitoring. Our approach is based on computing, from the images themselves, the photographer's locations and orientations, along with a sparse 3D geometric representation of the as-built scene using daily progress photographs and superimposition of the reconstructed scene over the as-planned 4D model. Within such an environment, progress photographs are registered in the virtual as-planned environment, allowing a large unstructured collection of daily construction images to be interactively explored. In addition, sparse reconstructed scenes superimposed over 4D models allow site images to be geo-registered with the as-planned components and consequently, a location-based image processing technique to be implemented and progress data to be extracted automatically. The result of progress comparison study between as-planned and as-built performances can subsequently be visualized in the D4AR - 4D Augmented Reality - environment using a traffic light metaphor. In such an environment, project participants would be able to: 1) use the 4D as-planned model as a baseline for progress monitoring, compare it to daily construction photographs and study workspace logistics; 2) interactively and remotely explore registered construction photographs in a 3D environment; 3) analyze registered images and quantify as-built progress; 4) measure discrepancies between as-planned and as-built performances; and 5) visually represent progress discrepancies through superimposition of 4D as-planned models over progress photographs, make control decisions and effectively communicate those with project participants. We present our preliminary results on two ongoing construction projects and discuss implementation, perceived benefits and future potential enhancement of this new technology in construction, in all fronts of automatic data collection, processing and communication.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6D
• /
• pp.917-926
• /
• 2006

Transportation Economies of scale are the essential properties of hub networks. One critical property of the hub network design problem is to quantify cost savings which stem from economies of scale, the costs of operating hub facilities and opportunity costs associated with delays stemming from consolidation of traffic flows. Due to the NP-complete property of the hub location problem, however, most previous researchers have focused on the development of heuristic algorithms for approximate solutions. The purpose of this paper is to develop a hub network design model considering transportation economies of scale from the consolidation of traffic flows. The model is designed to consider the uniqueness of hub networks and to determine several cost components. The heuristic algorithms for the developed model are suggested and the results of the model are compared with recently published studies using real data. Results of the analysis show that the proposed model reflects transportation economies of scale due to consolidation of flows. This study can form not only the theoretical basis of an effective and rational hub network design but contribute to the assessment of existing and planned logistics systems.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4D
• /
• pp.361-368
• /
• 2010

It is general that mostly congested sections of national backbone networks have been improved based on the national network expansion plan. However, in case of intermodal terminals which are origins of logistics, it is still so congested that travel time between origin and destination is long. Therefore, intermodal transportation systems plan of major intermodal terminals for the intermodal connector networks between intermodal terminal and national backbone network or intermodal terminal was established. With the limitation of priority methodology applying to intermodal connector facility under existing methodology, this study suggests an improved priority methodology. This study includes characteristics of terminal on the hierarchical structure and assessment list, but it does not concentrate on the specific terminal type through survey. To avoid a certain concentration, budget constraint for each terminal type was considered ahead of priority. Finally priority methodology was developed with two-step assessment under consideration that specific terminal is not involved in intermodal connector facility project. As a result of calculating weights by survey, effects such as d/c and accessibility fluctuations index through project implementation gain high weight, and degree of region underdevelopment gets next. Although the methodology in this study could not yields the priority by assessment list, it will be useful for setting the direction on policy related to intermodal connector facility projects.