• Geomechanics and Engineering
• /
• v.10 no.6
• /
• pp.737-755
• /
• 2016

The load transfer depth of a ground anchor is the minimum length required to transfer the initial prestressing to the grout column through the bonded part. A thorough understanding of the mechanism of load transfer as well as accurate prediction of the load transfer depth are essential for designing an anchorage that has an adequate factor of safety and satisfies implicit economic criteria. In the current research, experimental and numerical studies were conducted to investigate the load transfer mechanism of ground anchors based on a series of laboratory and field load tests. Optical FBG sensors embedded in the central king cable of a seven-wire strand were successfully employed to monitor the changes in tensile force and its distribution along the tendons. Moreover, results from laboratory and in-situ pullout tests were compared with those from equivalent case studies simulated using the finite difference method in the FLAC 3D program. All the results obtained from the two proposed methods were remarkably consistent with respect to the load increments. They were similar not only in trend but also in magnitude and showed more consistency at higher pullout loading stages, especially the final loading stage. Furthermore, the estimated load transfer depth demonstrated a pronounced dependency on the surrounding ground condition, being shorter in hard ground conditions and longer in weaker ones. Finally, considering the safety factor and cost-effective design, the required bonded length of a ground anchor was formulated in terms of the load transfer depth.

• Environmental and Resource Economics Review
• /
• v.11 no.2
• /
• pp.211-231
• /
• 2002

This paper summarizes the results of a study that assess how a demand side management (DSM) system addresses key economic and environmental challenges facing in the Korean natural gas sector considering; ${\bullet}$ high discrepancies of seasonal consumption volume and of load factor in unmatured domestic LNG market, ${\bullet}$ unfavorable and volatile international LNG market, imposing with the contestable "take-or-pay" contract terms, ${\bullet}$ low profile of LNG and existence of market barriers against an optimal fuel mix status in the industrial energy sector. A particular focus of this study is to establish an 'extended' DSM system in the unmatured gas market, especially in industry sector, that could play a key role to assure an optimum fuel mix scheme. Under the concept of 'extended' DSM, a system dynamics modeling approach has been introduced to explore the option to maximize economic benefits in terms of the national energy system optimization, entailing different ways of commitments accounting for different DSM measures and time delay scenarios. The study concludes that policy options exist that can reduce inefficiencies in gas industry and end-use system at no net costs to national economy. The most scenarios find that, by the year 2015, it is possible to develop a substantial potential of increased industrial gas end-uses under more reliable and stable load patterns. Assessment of sensitivity analysis suggests that time delay factor, in formulating DSM scenarios, plays a key role to overcome various market barriers in domestic LNG market and provides a strong justification for the policy portfolios 'just in time' (time accurateness), which eventually contribute to establish an optimum fuel mix strategy. The study indicates also the needs of advanced studies based on SD approach to articulate uncertainty in unmatured energy market analysis, including gas.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.2
• /
• pp.107-118
• /
• 2021

Due to the acceleration of road construction, the number and extension of tunnels are increasing every year. A lot of research has been done on the collapse of tunnels, but research on the invert heaving is insufficient. Therefore, in this study, a sensitivity analysis was performed using a geotechnical general-purpose program to analyze the effect of the invert curvature of a tunnel excavated on the soft ground. As a result, it was quantitatively confirmed that the stability of a tunnel was increased as the curvature of the tunnel invert was increased so that the safety factor was calculated to be large regardless of the ground conditions and the thickness of the support. In addition, it was confirmed that the stability of the tunnel was increased by reducing the convergence of the tunnel and the maximum bending stress supported by shotcrete. Therefore, when a tunnel is excavated on soft ground, it is believed that applying a curvature to the invert will increase the stability of the tunnel.

• Journal of Korean Society on Water Environment
• /
• v.35 no.5
• /
• pp.425-431
• /
• 2019

Recently, people have been attracting attention to the good quality of water resources as well as water welfare. to improve the quality of life. This study is a papers on the prediction of benthic macroinvertebrate index (BMI), which is a aquatic ecological health, using the machine learning based CFS (Correlation-based Feature Selection) method and the random forest model to compare the measured and predicted values of the BMI. The data collected from the Han River's branch for 10 years are extracted and utilized in 1312 data. Through the utilized data, Pearson correlation analysis showed a lack of correlation between single factor and BMI. The CFS method for multiple regression analysis was introduced. This study calculated 10 factors(water temperature, DO, electrical conductivity, turbidity, BOD, $NH_3-N$, T-N, $PO_4-P$, T-P, Average flow rate) that are considered to be related to the BMI. The random forest model was used based on the ten factors. In order to prove the validity of the model, $R^2$, %Difference, NSE (Nash-Sutcliffe Efficiency) and RMSE (Root Mean Square Error) were used. Each factor was 0.9438, -0.997, and 0,992, and accuracy rate was 71.6% level. As a result, These results can suggest the future direction of water resource management and Pre-review function for water ecological prediction.

• Journal of Korea Water Resources Association
• /
• v.55 no.9
• /
• pp.701-705
• /
• 2022

Reliable drought inflow scenarios are required to plan reservoirs in response to the present severe drought-like conditions. However, the previously developed method for generating drought inflows, the K-water cumulative difference method (KCM), is considered inadequate owing to its potential for negative inflow, reversal phenomena, and overestimation. Nevertheless, the occurrence of these aspects has not been theoretically analyzed. Hence, this study employed the quantile function and frequency factor for log-normal and Gumbel distributions to quantify the contributing factors of these limitations. Consequently, it was found that the negative inflows are generated when the difference in the location parameters, during the accumulation process, exceeds that of the scale parameters. In addition, as the standard deviation decrease during the accumulation process, the reversal phenomena, and inflated values prevailed.

• Journal of Environmental Science International
• /
• v.32 no.6
• /
• pp.403-417
• /
• 2023

In this study, we investigated the characteristics of Volatile Organic Compounds(VOCs) emission from painting and printing facilities in the Pyeongdong industrial complex in Gwangju. In addition, the objective was to understand the distribution characteristics of VOCs in the ambient air in industrial complexes affected by painting and printing facilities. The painting facility mainly emitted toluene, acetone, butyl acetate, 4-methyl-2-pentanone, ethyl acetate, 1-butanol, methyl ethyl ketone, m,p-xylene, o-xylene, 4-ethyltoluene, ethylbenzene, 3-ethyltoluene, and 1,2,4-trimethylbenzene. The main emission components in printing facilities were methyl ketone, ethyl acetate, acetone, 2-propanol, toluene, heptane, and butyl acetate. Ethyl acetate, toluene, 2-butanone, acetone, butyl acetate, 2-propanol, xylenes, and 4-methyl-2-pentanone were detected in the ambient air of the Pyeongdong industrial complex, consistent with the VOCs emitted by painting and printing facilities. The average concentration of seasonal TVOCs followed an order of winter > fall > spring > summer, whereas the concentrations of daytime and nighttime TVOCs were generally higher at night than those during the day, and the wind speed was greater during the day than it was at night. Based on a factor analysis of VOCs in the ambient air of Pyeongdong industrial complex, it is considered that organic solvents used in coating, printing, and electronics manufacturing facilities, as well as diesel vehicle emissions played a major role.

• Journal of the Korean GEO-environmental Society
• /
• v.25 no.8
• /
• pp.5-11
• /
• 2024

Due to the high proportion of mountainous terrain in Korean territory and the concentration of heavy rainfall during the summer season, concerns arise about the potential decrease in slope stability caused by rainfall. Installing slope drainage facilities mitigates the rise in groundwater levels due to infiltration, thus enhancing slope stability. Horizontal drains, classified as auxiliary facilities among drainage systems, lack established installation standards and related research. Slopes with installed horizontal drains have been confirmed to exhibit higher safety factors compared to those without. Furthermore, the safety factor of mimicking horizontal drains by increasing the permeability coefficient of the surrounding ground was compared with that of the conventional simulation method using the Drain function. As a result of the comparison, it was confirmed that the installation length showed better drainage performance than the installation angle in the drainage performance of the horizontal drainage hole, and it was judged that the installation length was a more important factor.

• Journal of Korean Society on Water Environment
• /
• v.40 no.5
• /
• pp.215-228
• /
• 2024

Lakes are one of major sources of methane gas due to anaerobic decomposition of organic matter in sediments. Since methane released from lakes is a greenhouse gas, it is necessary to investigate factors affecting methane production of lakes. This study conducted field and incubation experiments in Lake Asan in August and October to determine effects of thermal stratification and sediment organic matter characteristics on methane production. Field experiments measured temperature and dissolved oxygen to determine the formation of thermal stratification of lakes. Methane and organic matter characteristics were analyzed using gas chromatography, Total Organic Carbon (TOC) analyzers, and fluorescence spectroscopy. Incubation experiments under anaerobic conditions used sediment and water samples from the same site. Field results showed higher methane fluxes in August and increased Dissolved Organic Carbon (DOC) concentration closer to Asan Bay seawall. Elevated methane fluxes and DOC concentration resulted from intensified anaerobic decomposition formed by thermal stratification. Incubation results indicated that sediment organic matter characteristics influenced methane flux between sites. Statistical analysis revealed that thermal stratification could be a primary factor affecting methane production of lakes. Characteristics of sediment organic matter with respect to quantity and quality could be factors influencing methane production of lakes. Results of this study can serve as fundamental data for predicting methane emissions from lakes due to climate change and for mitigating lake's contributions to global warming.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.1
• /
• pp.89-97
• /
• 2006

Soil erosion has caused serious environmental problems which threaten the foundation of natural resources. In this paper, we chose RUSLE erosion model, which could be connected easily with GSIS and available generally in mid-scale watershed among soil erosion models, and extracted factors entered model by using GSIS spatial analysis method. First, this study used GIS database as soil map, DEM, land cover map and rainfall data of typhoon Memi (2003) to analyze soil loss amount of Dam basin. To analyze the changes of soil loss in considering basin characteristics as up-, mid- and downstream, this study calculated soil erodibility factor (K), topographic factors (LS), and cover management factor (C). As a result of analysis, K and LS factors of upstream showed much higher than those of downstream because of the high ratio of forest. But C factor of downstream showed much higher than that of upstream because of the high ratio of agricultural area. As a result of analysis of soil loss, unit soil loss of upstream is 4.3 times than soil loss of downstream. Therefore, the establishment of countermeasures for upstream is more efficient to reduce soil loss.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.4
• /
• pp.556-565
• /
• 2014

Objectives: This study is aimed at inquiring into the grasp of real condition of working environment and improvements by calculating the hypertension distribution consequent on job stress risk and exposure level of alleviating factors. In addition, this study is intending to estimate the hypertension distribution through socio-demographic factors and level of stressors occurring at working environment, such as high workload, low control, low support, job insecurity, long working hours, low income. Methods: This study estimated the hypertension distribution using the tertiary Korean Working Conditions Survey data, and conducted comparative analysis according to the category of individual questionnaire items using odds ratio. Result: As a result of study, it was found that in the event that working environment satisfaction is low and business & an immediate superior's attitudes are negative, the hypertension distribution was high. Particularly, it was found that physical risk factor musculoskeletal risk factor, and mental risk factor in a workplace were all increasing the hypertension distribution. Conclusions: With the aged workers' labor market participation ratio increasing, hypertension could be a major issue in the field of Occupational Safety and Health. Thus, it's necessary that the relevant employer should lower the hypertension distribution through creation of pleasant working environment and inducement of workers to improve in the relations with their superiors. As for the uppermost limit of this study, there is a limit to clarifying the mechanism of hypertension through multivariate statistics analysis because it's difficult to establish causal relationship by individual questionnaire item as the working conditions survey is made by cross-sectional study. In the follow-up research, this study is going to do research on the mechanism of hypertension through questionnaire supplementation and in-depth analysis.