• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.3
• /
• pp.75-83
• /
• 1984

The probability of failure is used to analyze the reliability of three dimensional slope failure, instead of conventional factor of safety. The strength parameters are assumed to be normal variated and beta variated. These are interval estimated under the specified confidence level and maximum likelihood estimation. The pseudonormal and beta random variables are generated using the uniform probability transformation method according to central limit theorem and rejection method. By means of a Monte-Carlo Simulation, the probability of failure is defined as; $P_f=M/N$ N: Total number of trials M: Total number of failures Some of the conclusions derived. from the case study include; 1. Three dimensional factors of safety are generally much higher than 2-D factors of safety. However situations appear to exist where the 3-D factor of safety can be lower than the 2-D factor of safety. 2. The $F_3/F_2$ ratio appears to be quite sensitive to c and ${\phi}$ and to the shape of the 3-D shear surface and the slope but not to be to the unit weight of soil. 3. From the two models (normal, beta) considered for the distribution of the factor of safety, the beta distribution generally provides lager than normal distribution. 4. Results obtained using the beta and normal models are presented in a nomgraph relating slope height and slop angle to probability of failure.

• Atmosphere
• /
• v.29 no.1
• /
• pp.61-74
• /
• 2019

To investigate the observational environment, sky line and skyview factor (SVF) are calculated using a digital elevation model (DEM; 10 m spatial resolution) and 3 dimensional (3D) sky image at radiation site, Gangneung-Wonju National University (GWNU). Solar radiation is calculated using GWNU solar radiation model with and without the sky line and the SVF retrieved from the 3D sky image and DEM. When compared with the maximum sky line elevation from Skyview, the result from 3D camera is higher by $3^{\circ}$ and that from DEM is lower by $7^{\circ}$. The SVF calculated from 3D camera, DEM and Skyview is 0.991, 0.998, and 0.993, respectively. When the solar path is analyzed using astronomical solar map with time, the sky line by 3D camera shield the direct solar radiation up to $14^{\circ}$ with solar altitude at winter solstice. The solar radiation is calculated with minutely, and monthly and annual accumulated using the GWNU model. During the summer and winter solstice, the GWNU radiation site is shielded from direct solar radiation by the west mountain 40 and 60 minutes before sunset, respectively. The monthly difference between plane and real surface is up to $29.18M\;m^{-2}$ with 3D camera in November, while that with DEM is $4.87M\;m^{-2}$ in January. The difference in the annual accumulated solar radiation is $208.50M\;m^{-2}$ (2.65%) and $47.96M\;m^{-2}$ (0.63%) with direct solar radiation and $30.93M\;m^{-2}$ (0.58%) and $3.84M\;m^{-2}$ (0.07%) with global solar radiation, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.2
• /
• pp.69-76
• /
• 2015

BACKGROUND: Contamination of soils by heavy metals is the serious environmental problem. In particular, industrial processing is one of the main sources of heavy metal contamination. The objective of this study was to investigate the distribution characteristics of heavy metals in soils collected from industrial complex. METHODS AND RESULTS: In this study, the soil contamination and enrichment factor (EF) of heavy metals were investigated in three national industrial complexes such as Yeosu, Ulsan and Sihwa Banwal industrial complexes. The target heavy metals includes Cd, Cu, As, Hg, Pb, Cr, Zn, and Ni. The results showed that the contents of Cd, Hg, Pb, Zn and Ni in Yeosu and the contents of Cu, As and Cr in Sihwa Banwal were higher than in any other industrial complex. The results of principal component analysis(PCA) in Yeosu, Ulsan and Sihwa Banwal complex could be explained up to approximately 81.4, 69.1 and 70.9% by two factor, respectively. Enrichment factors of Cd, Pb and Zn in all the investigated industrial complexes were above 1.0 that was the value judged to be a high contamination. And EF of Cr was above 1.0 in Sihwa Banwal complex. EF of Zn in all sites was generally high from the other heavy metals. CONCLUSION: Therefore, soils maybe significantly affected by heavy metals (especially, Cd, Pb and Zn) present in the emissions from industrial complexes.

• Journal of Internet of Things and Convergence
• /
• v.8 no.3
• /
• pp.1-10
• /
• 2022

The purpose of this study was to investigate how the characteristics of mobile-based financial platforms have an impact on the intention to use loan service users. In addition, it was attempted to investigate whether usefulness and ease of use had a mediating effect in the relationship between each characteristic of the mobile financial platform on the intention to use the loan service. Data collection was conducted from March 1 to April 30, 2022, and 200 people participated in the study. Analysis methods were frequency analysis, exploratory factor analysis, reliability analysis, correlation analysis, hierarchical multiple regression analysis, and three-step mediation regression analysis. The research results are as follows. First, the influence of user factors, technical factors, and environmental factors of a financial platform on the intention to use a mobile loan service was found to be ubiquity in user factors, reliability in technical factors, and facilitation conditions in environmental factors. Second, in the relationship between convenience and intention to use user factors, usefulness had a completely mediating effect. Third, in the relationship between reliability of technical factors and intention to use, usefulness showed a partial mediating effect. Fourth, in the relationship between the social impact of environmental factors and facilitation conditions and intention to use, the usefulness showed a partial mediating effect. Fifth, ease of use showed a completely mediating effect in the relationship between convenience and intention of use of user factors. Sixth, in the relationship between reliability of technical factors and intention to use, ease of use showed a partial mediating effect. Seventh, in the relationship between the social impact of environmental factors and intention to use, ease of use showed a partial mediating effect, and in the relationship between facilitation conditions and intention to use, ease of use showed a fully mediating effect. Through this study, we tried to present basic data on the determinants of the user's acceptable intention to use the mobile loan service.

• Journal of Wetlands Research
• /
• v.19 no.1
• /
• pp.30-36
• /
• 2017

SS(Suspended Solid) concentration by soil erosion into river at normal and flood season should be measured. However, to present the variation of SS due to various development project such as EIA(Environmental Impact Assessment), River Master Plan, and so on, it is necessary to estimate not measure SS, but there are not exist how to estimate SS. In the present study, therefore, we propose the hydrologic method of estimating SS concentration using the results of particular frequency flood discharge and sediment discharge by RUSLE method. SS consists of silty and clay soil and colloid particle etc. However, in the present study, silty and clay soils of sediment discharge except send set up SS standards. The flow discharge to estimate SS concentration are 1~2 years for normal season, 30~100 years for flood season. Meanwhile, analysis software for probable rainfall uses Fard2006, probable rainfalls under 2-year frequency are estimated using rainfall data and frequency factor of Gumbel distribution. The results of estimating SS concentration using runoff volume by sediment and flow discharges of silty and cray soils as above method show that reliable level of SS concentration is considered in predevelopment of natural condition and under development of barren condition. Especially, SS concentration takes notice that the value of sediment discharge makes a huge difference according to channel slope, it was confirmed that the value obtained by dividing the SS concentration by the channel slope is relatively constant even though the topographical factors are different. Therefore, if the present study will be proceeded for various watersheds, it will be developed as estimation method of SS concentration.

• Journal of Environmental Health Sciences
• /
• v.25 no.3
• /
• pp.36-43
• /
• 1999

The present study was performed to investigate biodegradation rate of dichlorvos and methidathion. In the biodegradation test of two pesticides by the modified river die-away method from June 17 to August 22, 1998, the biodegradation rate constants and half-life were determined in Nakdong(A) and Kumho River(B). Biodegradation rate of dichlorvos was 4.51% in A sampling point, 6.88% in B sampling point after 7 days. Biodegradation rate constants and half-life of dichlorvos were 0.0066 and 105 days in A sampling point, 0.0102 and 67.9 days in B sampling point, respectively. Biodegradation rate of methidathion was 23% in A sampling point, 36% in B sampling point after 7 days. Biodegradation rate constants and half-life of methidathion were 0.0377 and 18.4 days in A sampling point, 0.0641 and 10.8 days in B sampling point, respectively. Biodegradation rate of methidathion was faster than that of dichlorvos. This suggested that the difference in biodegradation of pesticides was due to difference in the water quality and standard plate counts in the Nackdong and Kumho Rivers. The result of correlation analysis between biodegradation rate constants of the pesticides and water quality(DO, BOD, SS, ABS, NH$_3$-N, and NO$_3$-N) showed significant correlation with BOD, SS and NH$_3$-N at the 5% significant level. A significant linear equation was obtained from regression analysis at the 5% significant level, whereas, dependent variables were BOD, SS and NH$_3$-N, and the biodegradation rate constant was independent variable. It is suggested that dichlorvos will be mainly degraded by hydrolysis, and for methidathion was both hydrolysis and biodegradation. A significant QSAR equation was obtained from regression analysis at the 10% significant level, whereas, dependent variable is biodegradation rate constants of BPMC, chlorothalonil, dichlorvos and methidathion, vapor pressures, partition coefficients and water solubilities of the pesticides are independent variables. Also, a significant linear equation was obtained from regression analysis at the 1% significant level, whereas, dependent variable is biodegradation rate constants of BPMC, chlorothalonil, dichlorvos and methidathion, hydrolysis rate constants of the pesticides are independent variables. It is suggested that the pesticides will be degraded by main degradation factor when the pesticides was affected both hydrolysis and biodegradation.

• The Journal of Engineering Geology
• /
• v.17 no.3
• /
• pp.425-434
• /
• 2007

In this paper, the stability standards of slopes reclaimed by soils mixed with stone dust were proposed to manage the stone dust as recovery soils. First of all, the mixed ratio between stone dust and natural soil is classified into 5 groups, and a series of soil test was performed in each group. As the results of tests, the shear strength and the maximum dry unit weight were increased in decrease of the mixed ratio of stone dust. On the basis of the investigation to the safety factor standards of embankment slopes in and outside the country, a slope stability rank of slopes reclaimed by mixed soils were divided into 3 stages such as unstable stage, attention stage and stable stage. The slope angle, the slope height and the mixed ratio with stone dust were proposed by the result of stability analysis of slopes reclaimed by mixed soils. As the result of slope stability analysis, the slope angle of 1 : 1.8 at the reclaimed slope should be constructed in case of the slope height of 10 m. Also, the slope angle of 1 : 1.8 and the mixed ratio of stone dust less than 50% should be constructed in case of the slope height of 15 m. The analysis result of reclaimed slope constructed inside the quarry is similar to that of reclaimed slope constructed on the open ground in same conditions of the slope angle, the slope height and the mixed ratio with stone dust. The proposed stability standards of slopes reclaimed by soils mixed with stone dust can be used practically at the quarrying site.

• Journal of Environmental Impact Assessment
• /
• v.24 no.2
• /
• pp.175-189
• /
• 2015

The objective of this study was to analyze characteristics of distribution of amphibian species and the affecting ecological factors. For the study, habitat environment factors were determined and applied to a habitat suitability model for the data collected from the Seom River in Hoengseong County and Wonju City, Gangwon Province, Korea between March 2013 to October 2013. The analyzed amphibian species were Rana nigromaculata, Hyla japonica, Rana dybowski, and Rana rugosa Temminck and Schlegel, and a logistic regression model was used with the pseudo-absence data. The result of the model analysis suggests that the major factors for Rana nigromaculata are distance to vegetation and rock and that for Hyla japonica is waterway. Rana dybowski and Rana rugosa Temminck and Schlegel have similar habitat characteristics, but the latter is shown to be dominant due to its wider habitat preference. According to the species richness model, the analyzed amphibian species are shown to have tendency to move between valleys or streams. This study quantitatively analyzed habitat environment characteristics using species distribution model, however, there is a limitation in terms of analysis on food factor and connectivity with other species. Combined with additional density or habitat analysis on birds or fish, this study can lead to more comprehensive analysis on biological environment factors.

• Journal of Technologic Dentistry
• /
• v.35 no.2
• /
• pp.157-171
• /
• 2013

Purpose: This study aims to present a database for the development of a healthcare management program based on the survey and analysis of self reported psychosomatic symptoms among the current dental technology students. Methods: Subjects of our study are 480 dental technology major students enrolled in a third year college located Gyeonggi, Chungcheong, and Gangwon province. Using a random sampling, we conducted a self-report survey from August 30, 2011 to October 28, 2011 and 418 reports were collected as feedback and we put an analysis on them. Results: 1. The average physical self symptom was 20.49, which is higher than the average mental self symptom(18.54). Of the subcategories of psychosomatic self symptom, we observed multiple subjective symptoms as the highest one(37.77), and aggression as the lowest(13.77). 2. As to gender, both physical and mental self symptom were statistically significant with the scale score of(p<.001). The scale score of subcategories is as follows; multiple subjective symptoms(I, p<.001), eye and skin(B, p<.001), digestive(C, p<.001), impulsiveness(H, p<.001), lie scale(L, p<.001), mental instability(J, p<.001), depression(K, p<.001), aggression(F, p<.001), irregularity of life(G, p<.001), mouth and anal(D, p<.05), nervousness(E, p<.05). 3. As for obesity, statistical significance was shown with the scale scores of physical self symptom(p<.001), multiple subjective symptoms(I, p<.001), digestive(C, p<.001), aggression(F, p<.001), depression(K, p<.01), irregularity of life(G, p<.01), respiratory(A, p<.05), eye and skin(B, p<.05), impulsiveness(H, p<.05), mental instability(J, p<.05). The scale scores in the environmental quality and life satisfaction were shown as follows; depression(K, p<.001), lie scale(L, p<.01), and irregularity of life(G, p<.05). 4. We employed multiple regression analysis to take account of general factors affecting psychosomatic self symptoms, and drew that the explanatory power of the model was proved with the scales of physical self symptom(4.1%) and mental self-symptom(3.6%). Obesity was a factor that affects physical self symptom with the scale score of(p<.01), and environmental quality and life satisfaction(p<.01) and obesity(p<.05) affect mental self symptom. Conclusion: In this analysis we observed obesity of dental technology students can influence their psychosomatic self symptoms. In this sense, it would be reasonable to develop a healthcare management and education programs that help the students maintain a healthy weight and promote their health.

• The Journal of Engineering Geology
• /
• v.27 no.2
• /
• pp.165-172
• /
• 2017

This research aims to define influence factors to perform an optimized section design and evaluate tunnel collapse risk during construction using Delphi technique. A total of five upper classification systems were constructed through literature review, pervious research analysis, and brainstorming of expert group for establishing influence factors. The $1^{st}$, $2^{nd}$, and $3^{rd}$ Delphi survey process was proceeded by panel group which is consisted 21 experts to prevent errors and bias in the expert judgement process. In Delphi $1^{st}$ survey, a total of 22 influence factors candidates were derived through open-ended questionnaire. In Delphi $2^{nd}$ survey, questionnaire was proceeded based on 7-point Likert scale method. In order to verify the validity, CVR (Content Validity Ration) analysis was performed to exclude inappropriate candidates. In the $3^{rd}$ survey, verification of influence factors was proceeded once more with the result of $2^{nd}$ survey, and lastly, a total of 14 influence factors was derived by CVR and COV (Content Validity Ration) analysis for response of experts.