• Korean Journal of Plant Resources
• /
• v.34 no.2
• /
• pp.144-155
• /
• 2021

This study was conducted to analyze community structure and species composition of Abies koreana forest. Field survey was carried out from June, 2019 to 2020, September. 121 plots (20×20 m) were set up, 5 herb layer plots (3×3 m) were constructed for each plot, and there, Diameter at Breast Height(DBH), height, environmental factor were measured. It was analyzed that water stress did not have a significant effect on the factors affecting the growth of A. koreana in Mt. Halla-san, and in the case of Mt. Deokyu-san, the more forest stands located at the ridge, the higher the tree density. It was found that the factors affecting the distribution of Abies koreana were not consistent according to the environment of study site.

• Journal of Korea Water Resources Association
• /
• v.54 no.3
• /
• pp.145-156
• /
• 2021

Forest fires have frequently occurred around the world, and the damages are increasing. In Korea, most forest fires are initiated by human activities, but climate factors such as temperature, humidity, and wind speed have a great impact on combustion environment of forest fires. In this study, therefore, based on statistics of forest fires in Gyeonggi-do over the past five years, meteorological and hydrological factors (i.e., temperature, humidity, wind speed, precipitation, and drought) were selected in order to quantitatively investigate causal relationships with forest fire. We applied a partial least squares structural equation model (PLS-SEM), which is suitable for analyzing causality and predicting latent variables. The overall results indicated that the measurement and structural models of the PLS-SEM were statistically significant for all evaluation criteria, and meteorological factors such as humidity, temperature, and wind speed affected by amount of -0.42, 0.23 and 0.15 of standardized path coefficient, respectively, on forest fires, whereas hydrological factor such as drought had an effect of 0.23 on forest fires. Therefore, as a practical method, the suggested model can be used for analyzing and evaluating influencing factors of forest fire and also for planning response and preparation of forest fire disasters.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.12
• /
• pp.79-88
• /
• 2011

Adfreeze bond strength develops upon freezing of pore water within soil and at foundation surface. It has been reported that various factors like temperature, soil type, and pile surface roughness affect adfreeze bond strength. Especially, pile surface roughness has been considered as a primary factor to design pile foundation in frozen ground. It has usually been estimated with fixed correction factors for pile materials. However, even if the pile foundation material is the same, the surface roughness could vary depending on the production circumstances. In this study, laboratory test was carried out to quantitatively analyze the effects of surface roughness on the adfreeze bond strength, and fractal dimension was used as a measure for surface roughness. Test results showed that adfreeze bond strength increased with decreasing temperature, increasing vertical stress and surface roughness. The adfreeze bond strength varies sensitively with surface roughness in the early freezing section of $-2^{\circ}C$, but its sensitivity decreased in the temperature ranging between $-2^{\circ}C$ to $-5^{\circ}C$. The results conclude that the roughness highly affects the frictional resistance of pile surface in frozen ground; however, the roughness does not affect considerably when the temperature drops below about $-2^{\circ}C$.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.352-363
• /
• 2021

This study aimed to examine the different factors affecting the intention to purchase meal kits between at-home concept meal kits and eating-out concept meal kits. An online survey was conducted with 565 Korean participants including meal kit experienced (n=412) and non-experienced (n=153). Meal kits selection attributes were organized into five factors, health, price, environmental protection, convenience, and familiarity. To verify the hypothesis, SPSS Statistics 23 was used. The main results can be summarized as follows. First, in the case of the at-home menu, convenience(p < .01), environmental protection(p < .05), and familiarity(p < .01) show positive influences on willingness to buy. Second, for the eating-out menu, health(p < .001) and convenience(p < .001) have positive effects on willingness to buy, but familiarity(p<.01) has a negative effect. This is the first study to categorize the menu of meal kits and investigate each factor affecting willingness to buy. Therefore, the results can offer useful guidelines to meal kit marketers letting them know the consumers' purchase behaviors.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.2
• /
• pp.13-23
• /
• 2022

The ground-structure interaction of the bridge foundation has been pointed out as a major factor influencing the behavior of the bridge during earthquakes. In this study, the effect of characteristics of ground and bridge foundation on the earthquake vulnerability is investigated. From the pseudo-static analysis, it is confirmed that non-linearity becomes lesser and horizontal load becomes greater when surcharge is considered. It is also found that as the ground worsens and the size of foundation decreases, horizontal load reduces. To derive reasonable structural model for bridge foundation, fragility curve is obtained considering four conditions (fixed condition, equivalent linear condition, non-linear without surchage condition, non-linear with surcharge condition) and compared. Seismic analysis is performed on single pier with Opensees. From the earthquake vulnerability analysis, it is found that shallow foundation can be assumed as fixed condition. In conservative approach, stiffness of spring can be obtained based on Korean highway bridge design code for pile foundation which can consider the ground condition.

• Geomechanics and Engineering
• /
• v.25 no.3
• /
• pp.207-219
• /
• 2021

Several additives are used to enhance the geotechnical properties (e.g., shear wave velocity, shear modulus) of soils to provide sustainable, economical and eco-friendly solutions in geotechnical and geo-environmental engineering. In this study, piezoelectric ring actuators are used to measure the shear wave velocity of unreinforced, fiber, cemented, and fiber reinforced cemented Toyoura sand. One dimensional oedometer tests are performed on medium dense specimens of Toyoura sand-cement-fiber-silica flour mixtures with different percentages of silica flour (0-42%), fiber and cement (e.g., 0-3%) additives. The experimental results indicate that behavior of the mixtures is significantly affected by the concentration of silica flour, fiber and cement additives. Results show that with the addition of 1-3% of PVA fibers, the shear wave velocity increases by only 1-3%. However, the addition of 1-4% of cement increases the shear wave velocity by 8-35%. 10.5-21% increase of silica flour reduces the shear wave velocity by 2-5% but adding 28-42% silica flour significantly reduces the shear wave velocity by 12-31%. In addition, the combined effect of cement and fibers was also found and with only 2% cement and 1% fiber, the shear wave velocity increase was found to be approximately 24% and with only 3% cement and 3% fibers this increased to 35%. The results from this study for the normalized shear modulus and normalized mean effective stress agree well with previous findings on pure Toyoura sand, Toyoura silty sand, fiber reinforced, fiber reinforced cemented Toyoura sand. Any variations are likely due to the difference in stress history (i.e., isotropic versus anisotropic consolidation) and the measurement method. In addition, these small discrepancies could be attributed to several other factors. The potential factors include the difference in specimen sizes, test devices, methods of analysis for the measurement of arrival time, the use of an appropriate Ko to convert the vertical stresses into mean effective stress, and sample preparation techniques. Lastly, it was investigated that there is a robust inverse relationship between α factor and 𝞫₀ exponent. It was found that less compressible soils exhibit higher 𝜶 factors and lower 𝞫₀ exponents.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.6
• /
• pp.5-17
• /
• 2022

The performance of the relief wells installed for the purpose of controlling seepage of the dam embankment is affected by various parameters such as diameter, spacing, penetration rate, permeability coefficient of the ground, thickness of the foundation layer. Therefore, when the relief wells are adopted for the purpose of reducing seepage pressure, these parameters should be sufficiently reviewed to determine the installation specifications of the relief wells. This study evaluated the effect of the length of the geosynthetics blanket on the performance of the relief wells installed in the downstream part of the dam embankment with blankets in the upstream and downstream part of the dam embankment as countermeasure methods to control seepage of the dam embankment. In the relationship between the length of the upstream and downstream blanket and the discharge, the discharge of the relief wells decreases as the length of the upstream blanket increases, and on the other hand, the discharge of the relief wells decreases as the length of the downstream blanket increases. In the upper and lower blanket length-spacing relationship, as the length of the upstream blanket increases, the spacing of the relief wells increases and as the length of the downstream blanket increases, the spacing of the relief wells decreases. Therefore, when installing the relief wells in parallel with the blanket, it was found that increasing the length of the upstream blanket is more efficient than increasing the length of the downstream blanket in order to minimize the discharge of seepage discharge and to ensure economic feasibility by wider installation of the relief wells.

• Korean Journal of Environmental Biology
• /
• v.40 no.2
• /
• pp.138-147
• /
• 2022

Paddy fields are important habitats for maintaining the biodiversity of agricultural ecosystems. Recently, as the need for safe food and biodiversity conservation has increased, the rice cultivation methods have undergone changes. This study was conducted to investigate the fish fauna in Environmentally Friendly Paddy fields (EFP) and Conventional Paddy fields (CP), and compare the characteristics of Misgurnus anguillicaudatus and Aphyocypris chinensis populations in EFP and CP. A total of 2,703 fish were collected and classified into six families and 13 species. Our results showed that there was a difference in the proportion of fish populations in the two paddy fields, and the number of individuals in EFP was higher than in CP. The weight values of M. anguillicaudatus were higher in EFP than in CP, and the total length, body length, and weight values of A. chinensis were higher in EFP than in CP. Conditional factor(K) values also showed similar trends in EFP and CP. Our results indicate that the farming practices in paddy fields have a significant effect on the characteristics of M. anguillicaudatus and A. chinensis populations, and the results of this study can be used as basic data for securing biodiversity in future agricultural ecosystems.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.753-759
• /
• 2006

To predict service life of concrete structures exposed to chloride attack, surface chloride concentration, diffusion coefficient of chloride ion, and chloride corrosion threshold value in concrete, are used as important factors. Of these, as the diffusion coefficient of chloride ion for concrete is strongly influenced by concrete quality and environmental conditions of structures and may significantly change the service life of structures, it is considered as the most important factor for service life prediction. The qualitative factors affecting the penetration and diffusion of chloride ion into concrete are water-cement (W/C) ratio, age, curing conditions, chloride ion concentration of given environment, wet and dry conditions, etc. In this paper the influence of W/C ratio and curing conditions on the diffusion characteristics of chloride ion in concrete was investigated through the chloride ion diffusion test. In the test, the voltages passing through the diffusion cell were measured by accelerated test method using potential difference, and then with the consideration of IR drop ratio the diffusion coefficient of chloride ion for concrete with different W/C ratios were estimated by Andrade's model. Furthermore, under different curing conditions formulas for the estimation of the diffusion coefficient of chloride ion have been proposed by the regression analysis considering the effect of W/C ratio and age.

• Asia Marketing Journal
• /
• v.15 no.2
• /
• pp.49-73
• /
• 2013

In this study, the author develops and tests a model that incorporates the mediating effects of two frontline employee psychological variables (emotional exhaustion and intrinsic motivation) based on job demand and resource model. As a form of environmental resource, person-organization fit was proposed as a leading factor of frontline employee boundary spanning behavior through emotional exhaustion and intrinsic motivation. All measures were adapted from or developed based on prior research. Data for the study were collected from a cross-sectional sample of retail bank employees in South Korea. Questionnaires were distributed to 500 frontline employees across several banks. Of these, 322 usable questionnaires were returned. To analyze the data, a structural equation model procedure using LISREL 8.5 was employed. Results show that an employee's perceived fit with his/her organization enhances intrinsic motivation and reduces emotional exhaustion. These mechanisms, in turn, increase the employee's boundary spanning behavior. These results support the notion that person-organization fit should be one of the factors affecting motivation, affect and attachment, and extends such an understanding to a purely service-based environment among customer contact employees. Results also confirms that P-O fit can be viewed as environmental resources, and the JD-R model provides a theoretical base in further studying the antecedent role of P-O fit on frontline employees's boundary spanning behavior through intrinsic motivation and emotional exhaustion. These results suggest that organizations have to do their best to manage P-O fit, be it through employee screening or training and workshops to try and align organization and employee values and objectives. If managers of organizations are positively evaluated by the employees, it will be easier for them to, give things of value to employees, such as sense of direction, values, and recognition, and receive other things in return such as esteem and responsiveness. Consequently, organizational leaders are not only able to manage employee experiences, but also their fit with the organization. Even if a manager cannot control employee P-O fit, this research suggests, that a focus on reducing emotional exhaustion rather than increasing intrinsic motivation seems optimal. This research also supports the idea that motivation has a direct association with a frontline employee's boundary spanning behavior. Even in situations where emotional exhaustion cannot be reduced, organizations may still influence frontline behaviors through motivation.